DIY Christmas tree made of paper and wire. Templates and diagrams for making paper trees

30.07.2019

OPTION 2

Very original Christmas tree you can make it with your own hands from pine cones. But we will not use the whole cones, but will use only their scales so that the tree is not too bulky.

So, first, let's separate its scales from the cone. This can be done sharp knife, nippers or pruning shears.

The next step from thick paper or cardboard we will make a cone, which will be the base of our Christmas tree. We roll the paper into a cone, glue it on the sides and cut off the excess at the base.

Then we simply take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, or, like here, on top of each other.

You can glue a spice like cloves to the very top of your head)

9.
After the glue has dried, you can start painting our beauty. To do this, you can use spray paint or regular paint. acrylic paint. If you choose acrylic paint with a metallic effect, your Christmas tree will look much more impressive.

10.
Then we cover the ends of the “twigs” with PVA glue and sprinkle glitter on them.

11.

Using exactly the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

OPTION 3

Knitted option:

OPTION 4

From threads:

OPTION 5

Handmade New Year's toys are always something special. They bring warmth and homeliness and are certainly an interesting gift. In addition, they are always original and will undoubtedly attract the attention of all guests.

At the same time, do New Year's toys It’s not at all difficult to do it yourself. Let's start with these Christmas trees :)

To begin, we will cut out blanks for future Christmas trees from thick cardboard (my Christmas trees are 12 cm high and 9 cm wide). I use kraft cardboard for this - it is thick enough to withstand a wide variety of manipulations, and also pleasant to look at.

Option 1. Lace plus paper. Production time 15 minutes.

By using sewing machine Sew cotton lace to the bottom edge of the Christmas tree. In order not to make a mistake with the length of a piece of lace, I first sew it on and then cut it off.

We retreat from the sewn edge a distance of about one and a half times greater than the width of the lace, and sew on the next frill. To prevent the lace from creeping up or down during the sewing process, I make a mark with a pencil where I need to arrive.

In the same way we sew all the frills onto the Christmas tree.

From scrapbooking paper we cut out pieces one and a half times wider than the width of the lace, one of the long edges of which is made into lace using a hole punch or curly scissors.

Carefully glue the strips under the lace, and sew them on a machine if desired.

We make the top like this.

We cut off the excess paper. As a result, we get a Christmas tree like this. You can apply glitter, snow flakes, glue pearls on it - in general, decorate it to your liking.

The reverse looks like this, but that doesn’t bother us for now :), we’ll deal with it a little later.

Variants of the same Christmas tree: instead of paper lace, you can use any ribbons sewn in the same way as lace; or decorative ribbons with roses

Option 2. Lace plus mini buttons. Production time 15 minutes.

We start in the same way as in the first option - sew on the lace.

We wait 1-2 minutes for the glue to “set” a little, after which we glue mini-buttons onto it in a chaotic manner.

In general, I am a big fan of sewn buttons, but in this case my hand trembled :), and I decided to put the needle and thread aside and use a simpler and faster method.

Other variations on the same theme: instead of mini-buttons - any ordinary buttons or rhinestones or pearls or small paper roses.

OPTION 6

From tinsel

OPTION 7

A simpler version of a Christmas tree made from ribbons is to simply attach a ribbon folded in half to the base. Moreover, you can attach it as satin ribbons, and paper (paper for scrapbooking).

OPTION 8

OPTION 9

New Year is not only about gifts and lots of goodies. On the eve of the holiday, you can give your child the joy of creativity and self-expression. Admiring an already “decorated” Christmas tree is, of course, great, but it’s much more interesting to make decorations with my own hands and watch how the house gradually turns into a fabulous one New Year's forest! What would a forest be like without a Christmas tree? We invite you to make an amazing New Year tree , which will be an excellent holiday decoration for your home.

To work we need a tight green paper, glue, scissors, round wooden stick and bead.

1. Cut out 3-4 circles of different diameters from thick green paper. We fold each circle in half four times and draw it along the fold line several times with a hard object. Using scissors, cut a small piece from the top of each folded circle.

2. Take wooden stick and put the most on it small circle. The tip of the stick should protrude no more than 5 mm. Carefully place the remaining circles through the bottom of the stick. A hole in the top of his head great circle Lubricate with glue and attach the circle to the stick with glue. This is how we fix our entire structure.

3. Now our Christmas tree can be attached to the base. For example, a wine cork. We put a bead on the top of the Christmas tree, where we left a gap of 5 mm. Our Christmas tree is ready!

OPTION 10

DIY New Year's toy - “coffee tree”

It often happens that the holidays are just around the corner, but you still aren’t in a festive mood. And I really want, like in childhood, to wait for the arrival of the New Year, miracles, gifts and the fulfillment of desires. From my own experience, I can say that mood is born from little things and often comes in the creative process. To feel the coming holidays, you can decorate your apartment for the New Year, start cooking or making something special. For example, a fragrant Christmas tree made of fabric and coffee. Why not? Moreover, you need few materials for this wonderful New Year tree.

Materials for creation coffee tree with your own hands:
sheet of cardboard small jar, for example, from under baby food coffee beans a small piece of fabric or burlap varnish (you can do without coating) Almost everyone also has the tools necessary for the work.

Tools for making a Christmas tree from coffee beans and fabric:
tweezers compasses glue (it is very convenient to use a hot glue gun) brush scissors needle and thread We do not indicate the sizes and quantities, since it all depends on what materials you use, as well as on the expected size of the Christmas tree. The process of creating this tree is simple and exciting. You can turn on your favorite one in the background New Year's film, and you will immediately feel that the New Year is very close, and miracles are knocking on your doors.

Making a coffee tree with your own hands
We make a cone from cardboard or thick paper. If you need a larger Christmas tree, you can use leftover wallpaper for the base. We glue the cone well around the edges. We put it on the table, check that it should be stable and tight.

We select a suitable size jar with a screw-on lid for the base.

Glue coffee beans onto the jar. The grains need to be glued on the same side, so the jar will look neater. It is convenient to take the grains with tweezers to protect your fingers from glue and burns (if you use a hot glue gun).

When the coffee beans are securely attached to the can, we proceed to the second layer, which we use to close any possible cracks and gaps between the beans.

The result should be a jar that looks like it consists of coffee beans. Only the neck is not covered so that the jar can be closed with a lid. The grains on the jar can be varnished. Then the leg of the tree will be smoother and glossier, but this will reduce the coffee aroma.

Let's get to the Christmas tree itself. If the size of the Christmas tree is large, and the frame (cardboard cone) does not seem rigid and stable enough, then it can be strengthened by simply filling it with something from the inside. This could be paper, napkins, fabric, etc. We cut the fabric or burlap for the external decoration of the Christmas tree to the size of the cone.

Glue the fabric to the cone, stretching and smoothing it.

Cover the bottom with a circle of cardboard.

We also cover the circle with cloth.

We will decorate the Christmas tree with patches. To do this, cut out identical small squares from fabric.

We remove several threads along the edges of the squares to form a neat fringe.

We glue the patches to the fabric on the cone. Glue coffee beans to the corners of each patch. This way we decorate the entire cone.

Now that the cone and jar are ready, let's move on to the lid of the jar. It must be decorated and glued to the bottom of the cone. If desired, it can be decorated with coffee beans (gluing the edges with them) or fabric (we will dwell on this method in more detail). Cut a thin strip from the fabric. Using a needle and thread, we form equal folds on a strip of fabric, and then glue the fabric to the lid.

All that's left is to glue the lid to the bottom of the cone.

New Year's decoration is ready! It can also serve a nice gift, both on its own and as a jar of coffee. Christmas decoration Festive mood and miracles to you!

AND A FEW CREATIVE IDEAS:

THANK YOU FOR YOUR ATTENTION!!!

Creative ideas for creating the main symbol of the New Year. Christmas tree master classes - quilling, trimming, applique, origami, kanzashi, beading. Tips for creating visual and educational aids in the form of Christmas trees and pine trees. Experience depicting coniferous trees in collages and collective works.

Such different Christmas trees for crafts, gifts and interior decoration.

Classic Christmas trees - made of spruce legs and tinsel
“Natural” Christmas trees - from branches, cones, wood shavings
Creative Christmas trees - from plastic forks, coins, cocktail straws
“Edible” Christmas trees - made from pasta, cereals, salt dough, fruits and sweets
Designer Christmas trees - made of threads, ribbons, feathers, buttons, fabric and lace
Handmade Christmas trees – crocheted and knitting needles, sewn from fabric and felt
Eco-friendly Christmas trees - from waste material: plastic bottles, magazines, newspapers
Funny Christmas trees “on legs”, in the “Tilda” style and from “palms”

Christmas Tree Parade

Contained in sections:
Includes sections:

Showing publications 1-10 of 1755.
All sections | DIY Christmas trees. Master classes, crafts of Christmas trees

« Christmas tree toys mysteriously transform an ordinary tree into fairy tale. However, this fairy tale has always been closely connected with life, which was read in Christmas tree a toy like an open book.” These words became the epigraph of the exhibition “ Christmas decorations. From the past to...

Integration of educational regions: "Artistic and aesthetic development", « Cognitive development» « Speech development» , "Social and communicative development". Tasks: Continue to introduce children to paper construction (origami, as one of the types of arts and crafts...

DIY Christmas trees. Master classes, crafts of Christmas trees - Photo report on the competition for the most beautiful and creative Christmas tree. Photo report

Publication “Photo report on the competition for the most beautiful and creative Christmas tree...”
Before the New Year, our kindergarten held a competition for the most beautiful and creative DIY Christmas tree. The exhibition included best works from each group. The exhibition was organized in the hall kindergarten, near, beautifully and originally decorated...

Image library "MAAM-pictures"

Summary of GCD according to the Federal State Educational Standard for modeling from salt dough in the second junior group “Our Christmas tree” Modeling from salt dough “Our Christmas tree” Types of children's activities: play, cognitive and research, artistic and aesthetic, communicative, perception fiction. Integration educational areas: “Cognitive development”, “Speech development”,...

As the New Year approaches, we all begin to feel the holiday atmosphere: the city streets glow with festive lights, large decorated Christmas trees appear in squares, and stores sell Christmas decorations, lanterns, tinsel. All that remains is to add a little holiday to the house...

This is how our New Year tree turned out!

Our beautiful Christmas tree is made of napkins. The children had fun making snowballs from napkins, which they then glued onto the outline of the drawn Christmas tree. Then, I colored and glued paper snowflakes that...

DIY Christmas trees. Master classes, crafts for Christmas trees - Master class “And our Christmas tree has soft needles” I present to your attention a presentation New Year's master - class “And our Christmas tree has soft needles.” Master class for teachers, educators,.+ junior schoolchildren Necessary materials

: We will need: 1. A Christmas tree made from cardboard; 2. cotton wool; 3. PVA glue; 4. small... Right after autumn holidays In kindergarten and school we begin to actively prepare for the main holiday of the year. You can create original New Year's crafts for kindergarten with your own hands, even with the smallest children, from scrap materials. It's simple, fast and cheap. Active mom offers a selection of ideas for joint creativity

with preschoolers on New Year's Eve.
1.
2.
3.
4.

The content of the article:

Christmas trees made of paper The constant main symbol of the New Year will certainly take special place

among the many crafts you will create with your baby. You can make a simple but effective Christmas tree by cutting circles out of paper different shades

To create your next paper Christmas tree, you will need the same foam cone and cut strips of colored scrapbooking paper of the same length and width. By folding the strips in half, you can stick them on the Christmas tree in rows, but it’s easier to attach each strip with a decorative pin. Decorate the Christmas tree with small plastic snowflakes. Bright, positive, made by a child’s hands, this paper Christmas tree will become a real decoration game room in kindergarten.

Alternatively, a similar Christmas tree can be made from ribbons:

The next New Year's tree is quite simple to make. To make it you will need cardboard blank in the shape of the same cone and small round napkins with lace pattern around the edges. Cover the cone with napkins in rows, starting from the very bottom. The stylish, delicate, dazzling snow-white Christmas tree is ready.

Another very simple manufacturing option paper Christmas tree with your own hands. Cut out a triangle from colored scrap paper, fold it like an accordion and “stick” the Christmas tree onto the trunk using a wooden skewer. Place on base and decorate with foil star. Simple and tasteful!

New Year's crafts for kindergarten for the Christmas tree

Christmas tree decorations are the very first thing that comes to mind when we're talking about about crafts for the New Year.

New Year's ones are easy to make and funny. To turn an ordinary light bulb into a snowman, Santa Claus, penguin or gnome, you need to prime it (with a special primer or PVA glue), apply a layer of base paint and a drawing (use acrylic paint or gouache - the latter will have to be varnished). For decoration, use felt, lace, eyes for toys, decorative flowers, etc.

From scrap materials: leftover yarn and felt, wire, beads - you can make such a funny snowman for the Christmas tree. The whole process is shown in detail in the illustrations:

You can hang bright white and red Christmas “candies” on the branches of a spruce tree. Making them is not at all difficult: you need to alternately string white and red beads onto the chenille and bend it.

Do-it-yourself Christmas crafts for kindergarten are very popular. foam balls. Buy such a ball - and the basis for your future Christmas tree decoration is ready. You can use pins to attach beads, sequins, buttons, and flowers to such a ball.

If you cut a triangle out of cardboard and wrap it with acrylic threads, you will get bright Christmas tree, which can be hung on the Christmas tree. You can make stars and balls in the same way.

It's very easy to make a Christmas tree decoration using popsicle sticks. Glue the sticks into a triangle, decorate it, glue the stem-leg, decorate bright decor and attach the pendant. What could be simpler?

Christmas tree for decoration New Year's tree can be cut out of thick felt and decorated with buttons.

It’s quite easy to make a Christmas tree from colored cord (or ribbon) and large beads:

Balls and figures based on them made from threads treated with PVA glue are always popular. Woolen threads need to be rolled in glue, wrapped around the inflated balloon, and after the glue hardens and the threads harden, lower the ball. The resulting ball can be decorated with sparkles, sequins, beads and hung on the Christmas tree.

Is it possible to do something like this? funny snowman for room decor.

New Year's crafts for kindergarten from pine cones

Cones - popular natural material for making crafts, including for the New Year.

Just paint the pine cone and place it on a stand - and now a small Christmas tree is ready to decorate a table or shelf.

The cone can be decorated with small pompoms and hung on the Christmas tree - it will be a wonderful alternative to traditional balls.

And, of course, you can make all kinds of figurines of animals and fairy-tale creatures from pine cones. For example, gnomes:

New Year's wreaths

Wreath on the door or on the wall - traditional decoration for many holidays. Natural New Year's door wreaths look gorgeous spruce branches, decorated with gold cones. Can you do it with preschoolers? New Year's craft simpler for kindergarten.

For example, take a sheet of double-sided colored paper, fold it in half and make cuts, not reaching the end by about 2 cm. Roll the sheet first into a tube and then into a ring, securing the ends with a stapler. Decorate with a paper bow.

A bright and simple wreath can be made from disposable plastic plate and pom-poms. Cut out the bottom of the plate, paint the plate with acrylic or gouache paint, decorate with pom-poms and bows.

About Active Mom already wrote, you can make a wreath on the door in the same way.

An original, stylish and simplest wreath can be made from clothespins. You can buy plastic green clothespins or paint them green color wooden clothespins. Alternately string clothespins and large red beads onto the wire, form a circle from the wire, and decorate with a ribbon bow.

An analogue to a door or wall wreath can be a homemade clock made from disposable plates. Numbers and arrows can be cut out of cardboard, paper or felt, or molded from hardening plasticine. Decorate the watch with ribbons, chenille, and a star indicating the coming year.

Hello, dear readers! On New Year's Eve, an incredible amount of all kinds of New Year's decorations appear on store shelves: Christmas tree decorations, tinsel, rain, bright garlands, firecrackers, artificial and live Christmas trees, etc. Speaking of Christmas trees, nowadays manufacturers offer consumers a really wide selection of Christmas trees: tall, small, tabletop, floor, lush, elegant, white, green, multi-colored... From which we can conclude that anyone can easily choose exactly the right model of Christmas tree, which, in his opinion, will most successfully fit into the interior of a house or apartment. But today’s article is not dedicated to factory-made, stamped Christmas trees, but to exclusive Christmas trees made with your own hands!

DIY Christmas trees.

For the manufacture of decorative Christmas tree, you can safely use almost any material: rhinestones, Christmas balls, threads, beads, wine corks, coffee and other beans, paper, buttons, wire, pine cones, tree leaves, feathers, pieces of fabric, ribbons, pasta and much more!

We have decided on the materials, but how to form the basis of the future Christmas tree? You can apply in the following ways:

Select a cone-shaped bottle onto which to subsequently glue the necessary parts.

2. Buy a ready-made foam cone - sold in the “Everything for creativity and handicraft” departments.

3. Make it from a sheet of paper.

Let's look at the last point in a little more detail...

First way: We take a sheet of whatman paper, draw a circle, cut it out, then on this circle we mark a sector in the form of a triangle with a pencil, cut it off, and from the remaining part we form a cone, gluing the side part with tape or glue.

Second way: take whatman paper, draw a circle, measure out the fourth part of the circle - a triangle (see photo), cut out this part and form a cone.

So, having selected or made the most suitable cone, we proceed directly to the decorative part...

DIY Christmas tree ideas.

Paper Christmas trees.

We select paper of a suitable shade, cut out and form a cone (described above), decorate with rhinestones, foil stars, beads, seed beads or ribbons.

DIY Christmas trees photo

Coffee trees.

We prepare a cone from thick paper, after which, using super glue, we successively fill in all the gaps on the cone; as an addition, you can use grains of rice, seeds, acorn caps, rhinestones, beads or seed beads.

DIY Christmas trees photo

DIY decorative Christmas trees made from pasta.

We select curly pasta, for example, bows, and paint them suitable color from a spray can, and after the paint has dried, we fix it on a cone (preferably dense foam) using instant glue. At the final stage, the Christmas tree can be supplemented with star-shaped pasta or small decorative bows.

Christmas trees made of threads.

We form a cone out of paper, take thick, suitable shades, wool threads, cover the surface of the cone with PVA glue and wrap it tightly with thread. Such Christmas trees can be complemented with bows, beads or rhinestones.

Christmas trees made from wine corks.

We form from wine corks Christmas tree, gluing the corks to each other with super glue.

DIY Christmas trees photo

DIY Christmas trees made from buttons.

We prepare a large number of buttons, if you want the buttons to be the same in tone, pre-paint them using a spray can. We form a cone from thick paper and completely cover it with buttons; buttons can be glued in several layers.

Christmas tree made of cones.

We form the entire Christmas tree out of cones... starting by gluing the cones to each other from the inner circle, and finally placing the resulting tree in a pot or securing it to an improvised decorative leg made from branches.

Christmas tree decorated with sparkles.

We form a cone out of paper, finely chop the rain and tinsel, mix thoroughly, cover the cone with PVA glue and completely sprinkle with chopped glitter. Finally, we cover the top of the Christmas tree with PVA glue so that the shiny elements do not fall off.

Christmas tree made of wire.

We take a cone made of foam plastic and from top to bottom in the form of a spiral, cover it with dense wire. The result is a very stylish spring tree.

Feather Christmas tree.

We purchase small feathers in the “Everything for Creativity” departments, make a cone out of paper, and start from the bottom up, tightly joining each other, gluing the weightless feathers onto the transparent “Moment” glue.

Christmas tree made of dry leaves.

We take dry leaves or bay leaves prepared in the fall and glue them to the previously created paper cone, it is better to form a “crown” from top to bottom, gluing the leaves under each other.

An article about how to quickly and unusually make a Christmas tree with your own hands. Such a craft will become great decoration at home or as a gift to a loved one.

Handmade gifts are becoming increasingly popular. With great interest, parents make crafts for kindergarten and school with their children, and give unique things to relatives, colleagues and friends. Naturally, the most optimal New Year's decoration At home, a Christmas tree is considered to be made from paper, sweets, tinsel glasses or napkins.

Today we will get acquainted with some ways with which you can make something unusual, but very beautiful Christmas tree with your own hands. We will use the simplest and most inexpensive materials.

DIY Christmas tree made from sweets and scrap materials: photo

List of materials:

Base (cone),
Candies,
Tinsel,
Glue,
Scissors,
Decorations (bows, balls, stars).

For the base, you can take everything that will hold the cone:

special foam figures
cardboard
colored paper
an empty box of the same chocolates that you plan to use as decoration
Whatever comes to mind and comes to hand

Variant of a Christmas tree with a cone made of plain paper and sweets: diagram, description

We take any colored sheet, fold it to form a cone, secure the edge with glue and remove the excess with scissors. The base is ready.
Let's move on to the tinsel. Starting from the base, we apply glue in dotted movements and from above, we wind the tinsel in a spiral until the very top. If there is a sprocket of suitable dimensions, then you can secure it.
The candies are attached to the tree around the tree using glue or thread. It is advisable to use 1-3 colors of candies so that it is harmonious and not cluttered.
If there are any balls, bows or other decorations, then attach them at the very end. Specially fixing in those places where space has been visually created.

This is the most quick way make a Christmas tree with your own hands. Approximate time production - up to 10 minutes.

The base of the Christmas tree can be decorated with cotton wool, thus creating a “snow effect”.
For lovers of American style, red bows around the entire perimeter are ideal.
We do not limit our imagination and do as our inner voice tells us.

This is a great gift for New Year grandmother, teacher, aunt, sister. The most popular candies are: Raffaello, Ferreroshe, although from regular caramels It also turns out to be a sweet, cute Christmas tree.

DIY Christmas tree made of colored paper: photo, description

DIY Christmas tree made from colored paper

To make a paper Christmas tree we will need:

Paper (what will it be more paper, all the better),
Glue,
Scissors,
Pencil or pen
Decorative materials for decoration.

We cut out a circle from paper, with which we make a cone for our Christmas tree.
The most simple option will paint the Christmas tree with any colors and
for volume, add a few beads, securing them with glue.

The Christmas tree is ready.

Also, after we have made the cone, we can cut a huge number of small circles, each of which we attach to the tree with glue, spreading only half of it, and bending the other a little. As a result, we get a three-dimensional Christmas tree.

How to make a cute Christmas tree from paper snowflakes and skewers for a mini-kebab: instructions, photos

Christmas tree option from paper snowflakes and wooden skewers for mini-kebabs.

We cut out snowflakes, as shown in the picture below, of different diameters. The top one is the smallest, and then we increase the radius of the circle by 1.5 - 2 times. How do you like the splendor of the Christmas tree? The more we increase the diameter, the more magnificent the tree.
Cut the snowflake to the center of the circle. Cut out a segment at the top snowflake 1/3 of the circle. From the second snowflake (middle) we cut out 1/4 of the circle and from the third (bottom) we cut out 1/5 of the circle.
Glue the edges of the snowflakes together to form cones, as in the picture below.
Thread snowflakes onto a skewer and get beautiful Christmas trees which are suitable for decoration festive table and interior.
A skewer can be inserted into fruits, dishes, or into a piece of foam, as in the picture below. It all depends on your imagination.

Christmas tree made from paper palms: instructions, photos

The “tree made from palms” can be called interesting and unusual. These could be the hands of family members or students of a school, a particular class or group.

There are many options. The ideological purpose of such a Christmas tree is to unite a certain number of people.

In order to make a Christmas tree from palms we will need:

glue,
felt-tip pen,
scissors and
several sheets of paper (the quantity depends on what kind of tree we ultimately want to see). Small - up to 7 palms, medium - 12-15, large - more than 20.

We take a person’s hand, trace the outline, cut it out and paste it on the wall, whatman paper, cone or something else. We do this until the size of our tree suits us as much as possible.

For the top, you can cut out a star, and decorate the entire perimeter with tinsel or small balls made from contrasting color paper. This way we will create the effect of a decorated Christmas tree.

From such palms you can make various figures to decorate homes, kindergartens and schools.

Craft - Christmas tree from magazine pages

Another one of unusual crafts- “Christmas tree from a magazine.”

A magazine with at least 200 pages and glossy pages is ideal. The thick cover can be removed. And now patience and time.

We bend each upper right corner of all pages towards us at 45 degrees.
We turn all the lower corners that go beyond the borders up.
We fold the remaining pages of the magazine in the same way.
It turns out to be an accordion. When it comes to an end - we see interesting Christmas tree, which can decorate any office all year round.

Christmas tree from old unnecessary children's coloring books: description of production, photo

Don’t rush to throw away your child’s already colored magazines, because the New Year is coming and we will need everything. So,

We take the usual paper cone that we already love,
glue,
scissors and
coloring, which we cut as much as possible long stripes, width from 3 cm.

We will now make a garland from it. We fold our strips and glue them together horizontally, after which we make vertical cuts along the length of the entire garland, half the width and with a frequency of no more than 5 mm.

We create a “comb” effect, and then simply glue it around the cone of the entire tree. Thus, the “teeth of the comb” turn into the “prickly needles” of our Christmas tree.

There are a lot of ways to make a Christmas tree with your own hands from paper, we looked at the simplest and at the same time the most unusual.

DIY topiary Christmas tree made from napkins: instructions, photos

I would like to say right away that a Christmas tree made from napkins always differs from other crafts in its visual lightness and tenderness. Some people do not immediately understand what material it is made of.
Fans of topiary will really like this option for creating a Christmas tree with their own hands. In order to make a topiary tree we will need the following materials:

Napkins,
Foam cone,
glue gun,
A decorated rod that will hold our Christmas tree (often they take an ordinary tree branch and disguise it under decorations),
small pot,
Gypsum (gypsum plaster will also work),
Beads on a string or other decorations.

We mix plaster with water, pour the mixture into a pot, strengthen the Christmas tree holder in it and place the cone of our Christmas tree on it.
Using templates, we draw circles on the napkins and bending the edges, we make “mini roses” from each napkin.
Next, each decoration, using glue gun apply to the cone, filling the entire space.
You can put a few of these “Mini Roses” on the top of our pot to compose our entire craft in style.
We wrap tinsel (beads on a string) around the entire perimeter of our tree; anything that looks beautiful will do.

Our DIY napkin tree is ready.

Napkins for this e The stripes can be the same color or you can take 2 colors and combine them beautifully. Incorporating your imagination into this project will give excellent results.

If you are not a fan of topiary, then a Christmas tree from napkins can be made on a regular cardboard cone, completely repeating the process described above. Another option for a Christmas tree made from napkins.

DIY Christmas tree from a champagne bottle: photo

DIY Christmas tree from a champagne bottle

For manufacturing we will need the following materials:

A bottle of champagne,
Tinsel,
Glue gun and glue itself.

A simple gift can be decorated in an original way if you take a bottle of champagne, glue tinsel dotted onto the glue and decorate additional accessories.

We will succeed, inside which there will be a surprise - a bottle of champagne.

Making a Christmas tree from plastic bottles: photo, diagram and description of production

At home, the most common method is to make a Christmas tree from plastic bottles. List of what is needed:

Making a Christmas tree from plastic bottles

Green plastic bottles
Paper,
Glue gun and glue stick.

Roll the sheet into a tube to obtain a diameter of 1-2 centimeters.
We cut the bottle into strips 2-5 centimeters wide and no longer than the length that will wrap our paper tube.
We cut the plastic strips perpendicularly to create a “comb effect”.
We add glue to the smooth edge and attach it around the paper tube.
The longer the needles of our Christmas tree, the more beautiful it is.
It is advisable to calculate the length so that the bottom is wider than the top, maintaining the proportions of a real Christmas tree.

The craft can be left as is, or it can be decorated with additional accessories made of paper, cardboard or other materials.

You can hang real Christmas balls on such a tree, only small size, this way our craft will look more real.

In conclusion, I would like to say that there are many ways to make a Christmas tree with your own hands.

The main thing is to be creative and try.

Handmade gifts are always much more pleasing than ordinary figurines bought in a store.

Making crafts together with children brings not just joy, but also real benefits, because during such activities, mutual understanding between parent and child is formed and tactile sensations develop.