Interesting Christmas trees. Christmas tree made of buttons

With your own hands
18.08.2019

DIY Christmas tree: ideas and manufacturing methods.

If you need to DIY unusual Christmas tree, then in this article you will find different variants. The homemade Christmas trees presented here are suitable both for a corporate party and as an exhibit for a children's New Year's competition.

What can you use to make a small decorative Christmas tree for a competition: ideas

  • The presence of the main props during the winter holidays creates the right mood and instills faith that the performance of miracles is not fiction, but a New Year's reality.
  • A real Christmas tree, no matter what size it is, any degree of “pomp” and “fragrance” can be competed by an artificial one fluffy beauty. Nowadays they sell illuminated and even scented Christmas trees.
  • But if you have already purchased a New Year's green beauty, and the child asks you to help him make a Christmas tree with his own hands, then approach this task creatively.

Using our tips, you can make not just a Christmas tree with your own hands, but a creative, original green beauty.

For you, we have selected several ways to create a New Year's coniferous tree with your own hands:

Method 1:

  • This option for creating a Christmas tree is suitable for those who can take care of the preparation of materials long before the onset of the holiday. winter holiday. These are the parents of the children attending kindergarten, or children of primary school age.
  • Creating crafts in a limited period of time for competitions with children is a common thing for such parents, so from time to time they replenish their supplies with natural materials and “needs” that can serve them well during the next competition turmoil.
  • If in late autumn you did not pass by fallen leaves and dried flowers, and saved them until the New Year holidays, then now is the time to take them out and decorate your homemade Christmas tree.

The process of creating a green beauty can be divided into several stages:

  • We take thick paper, cut out a semicircle and fold the edges so that we form a cone.
  • Now we cover the base of our Christmas tree with dry leaves. The tops of the leaves should stick out different sides, then the Christmas tree will turn out to be fun and original.
  • Here you can show your imagination and stick leaves in rows: yellow ones in one row, green ones in another, and red or orange ones in the third. You can stick leaves of different colors in any order, or you can make several Christmas trees and stick leaves of the same color on each one.
  • The process of creating a Christmas tree does not end here: we glue more flowers (dried or artificial) on top of the leaves. Place the finished Christmas tree on a pre-cut foam base and create New Year's composition: Christmas tree - in the center, next to it there are snowdrifts made of the same foam plastic (to prevent it from flying apart, it is better to glue the layers of “snow”).


Method 2:

  • Do beautiful Christmas tree maybe from balls of thread. Paper flowers are also used in crafts as decoration. New Year's beauty It turns out elegant, and it doesn’t take much time to make it.
  • Again, take thick cardboard and cut out a semicircle. We will need to make a cone - the base of the tree. The edges are secured with superglue, and the cone itself is covered with double-sided tape. After this, it will be possible to “thread” skeins of thread onto the “trunk” of the Christmas tree, selecting the appropriate size.
  • Beads, bows, feathers, ribbons and tinsel are suitable as decor for crafts. A wool tree will not look banal, even if all the skeins are chosen in the same color scheme.


  • If you don’t like the idea of ​​skeins of thread, then we suggest replacing this decorative element with flowers from corrugated paper or felt snowflakes. Cut from the same felt Christmas balls Can also be used for pasting cardboard cone.
  • How to easily make flowers from corrugated paper? We fold the paper into an accordion (size and color do not matter) and pull the accordion in the center with thread. Leave a piece of thread to attach the flower to the cone and straighten the edges of the petals.


Christmas tree with flowers made of corrugated paper

Tips for those who decided to look for ideas for creating a New Year's green beauty in the hand-made style:

  • The proposed option can always be improved and your own details added.
  • You can ignore the unspoken rules and create the base for the Christmas tree in the form of a triangle with clear edges or a cone. Setting to save correct form can also be ignored.


  • In the design version, the base of the Christmas tree can be located at an angle and consist of several tiers.
  • The traditional color of the New Year's beauty is green. But, creating a Christmas tree with my own hands, you can bring to life your childhood ideas about a New Year's tree and make it completely white, silver, yellow, gold.
  • Give the Christmas tree a shade that fits perfectly into the festive atmosphere and it will become a real unpredictable miracle.



  • Eat different ways securing the details of the Christmas tree. You can use glue, tape, wire. No matter what type of mount you use, it should be durable and look great. finished Christmas tree carefully, because the elements holiday decor They will look at everything and take pictures.
  • As a decoration for the top, you can use any Christmas tree toy, a star or a shiny cone made of paper or cardboard, “seat” an angel on the Christmas tree, or make a talisman for the coming year.



Method 3:

  • New Year's beauty in hand-made style can be made in classic style: made of cardboard base, tinsel and foil.
  • We will need a cardboard cone for the base of the tree. We make cones and twigs-needles from foil, corrugated paper. We glue them in random order onto the base.
  • We make it from multi-colored tinsel Christmas decorations, and a garland made of rain. All that remains is to attach a star or other spectacular toy to the top of the Christmas tree.


How to name a Christmas tree for a competition: list of names

  • A wonderful Christmas tree from the Magic family!
  • And our people are already decorating the Christmas tree.
  • Gift-bearing Christmas tree with garlands and confetti.
  • Gift for the Christmas tree.
  • The Christmas trees rule.
  • New Year's tree holiday.
  • New Year and Christmas - magic and witchcraft.
  • The New Year is sweeping the planet. The Christmas tree knows this, the children know this.
  • Decorating an unusual Christmas tree.
  • New Year's mystery.
  • Carnival of New Year's toys.
  • Round dance, round dance, we will soon celebrate the New Year.
  • How the Christmas tree sparkles with lights...
  • Favorite holiday – New Year.
  • Forest melody of the holiday.

Homemade, beautiful Christmas tree for a paper competition: ideas, diagrams, description, photos

Option 1:

To make a green beauty we will need:

  • thick colored paper
  • glue, scissors
  • a compass or device that can be used to draw a circle
  • cocktail tube or fountain pen base.

How to make a Christmas tree:

  • Cut out circles (we will need several pieces). To make them perfectly even, we use a compass. The size of each circle should be 1-2 cm larger than the previous one. The height of the Christmas tree will depend on the number of tiers (circles).
  • Fold the cut circles in half, and then in half twice more. To get a clear fold line, go along the edges with a ruler or scissors.
  • We unfold the circles folded into cones and cut out small holes in the center according to the diameter of the tube.
  • We cover the base (tube) with colored paper (to match the trunk of the coniferous tree) and place straightened circles along the tube.


Option 2:

  • To make the Christmas tree voluminous, we make preliminary markings on a sheet of paper in green or any other color you like best.
  • The main outline is the lowest tier of the tree. Let's make it bigger than the rest.
    Inside the drawn contour, stepping back from the edge a little more than half the resulting radius, draw a second contour using a compass.
  • After this, we take a ruler and divide the large circle into 12 sectors. Along the resulting lines of the first circle we make cuts to the lower contour of the circle.
  • We roll each sector into a cone and secure the edges. You can use tape or glue for this.
  • Next, we cut out the other tiers, making them one size smaller. We repeat the procedure of folding the sectors into a cone.
  • We make a hole in the center of each cone (the size of the wire on which we will string each tier of the Christmas tree).
  • Now we take the wire and bend it beautifully into a spiral bottom part(you can apply glue to this piece of wire and wrap it with thread of a suitable color).
  • We string the pre-prepared tiers of the Christmas tree onto a wire, and make the top in the form of a cone cut from the same paper.


Original craft - a Christmas tree for a competition made of cardboard: ideas, diagrams, description, photos

To work, you will need, in addition to colored cardboard, a hole punch, scissors, a tube or wooden stick, the diameter of which is equal to the diameter of the holes from the hole punch, and any decorations.

  • We make an accordion out of thick rectangular paper.
  • We place the accordion under the hole punch and make holes “at an angle”. The New Year's beauty can consist of one central row of holes or two made along the edges.
  • Pull the base through the holes. If the cardboard “moves” from the base tube, it can be secured with tape.
  • All that remains is to complete the design of the Christmas tree and install it on your desktop or hang it with a ribbon.



Other options for a cardboard Christmas tree:

Craft - creative, decorative Christmas tree for a competition: ideas, diagrams, description, photos

A beautiful Christmas tree will be made from tinsel. To do this, cut out a circle on a sheet of thick paper. Select the radius at your discretion, but if you are making a large Christmas tree, then instead of a compass, use the following device:

  • Take a thread and a needle and fasten a pencil on the opposite side. Now choose a point on a piece of whatman paper for the center of the circle and stick a pencil into this point.
  • Pull the thread well and draw a circle with a pencil, like a compass.
    Cut the circle into two halves (for one Christmas tree we will need one semicircle).
  • We secure the edges of the semicircle with tape so that we get a cone. This will be the basis for the Christmas tree.
  • Apply PVA glue to the base and begin gluing the tinsel in a spiral.
  • We decorate the finished Christmas tree with small nuts, cones, bows, bells or other decorations.


Craft - space tree for competition: ideas, diagrams, description, photo

Making a space Christmas tree will not be easy. However, if you decide to undertake such a feat, the result will delight and surprise all guests without exception. So, what is needed to make a Christmas tree:

  • MDV boards
  • Twine and wire
  • Garland
  • Parts of old disks cut into triangles.

Manufacturing process:

  • We cut out edges from the slabs for the future Christmas tree.
  • We secure the edges together using twine.
  • We install a garland inside the Christmas tree, and glue pieces of disks on top of the edge.





This is what should happen

Craft - spiral Christmas tree for a competition: ideas, diagrams, description, photo

Spiral Christmas trees can be made from wire. But it looks much more impressive New Year's tree made from chenille wire.



How to make a spiral Christmas tree

Options for spiral Christmas trees:



Spiral herringbone: option 1


Craft - a three-dimensional Christmas tree for a competition: ideas, diagrams, description, photo

How to do volumetric Christmas tree you will find out by watching the video.

Video: 3D TREE made from PAPER

Video: Do-it-yourself voluminous paper Christmas tree

Craft - Christmas tree for a competition made of wood: ideas, diagrams, description, photos

Options for wooden Christmas trees are presented in the photo selection:




How to make flowers from napkins




Craft - Christmas tree for a competition made of paper flowers

Craft - Christmas tree for a competition made of paper and rain: ideas, diagrams, description, photos

Video: DO-It-yourself Christmas tree

Craft - a Christmas tree from various scrap materials for a competition: ideas, diagrams, descriptions, photos

Options for Christmas trees made from scrap materials are presented in our photo gallery:


Video: 7 ideas for mini Christmas trees

Video: 10 Christmas trees made of different materials. New Year's crafts

What New Year can be imagined without the main symbol - the Christmas tree. Green beauties are sold on every corner on the eve of the holiday. However, for such a holiday it is not necessary to buy a live spruce. Try making it yourself. Therefore, in this article we will talk about what you can use to make a Christmas tree for New Year's holiday. It is worth saying that you can create the main symbol of the new year from absolutely different materials. And today we will tell you more about this.

Mini Christmas trees made from pine cones.

If your children love making crafts just like you, then they can also take part in creating such crafts. The next craft - a New Year tree consists of cones and plasticine. All your child needs is to learn how to roll small balls from plasticine. At the same time, you can use the most plasticine for this purpose. bright colors. You can use regular spools of thread as a base for the Christmas tree. But you must wrap them in foil. The cones are attached to the coil using super glue.

If you like the next Christmas tree, then take acrylic paints and paint the cone with it. Remember that the smartest thing to do here is to use green paint. In this case, the tips of the tree are painted in White color paint. Make it from plasticine Brown base for the Christmas tree. Use a star for decoration.

The next craft is a little more difficult to make. Here it is worth using beads. Therefore, if your child is small, then monitor this process yourself. Glue the beads to the pine cone using a glue gun.

All of the above crafts made from pine cones can not only decorate your home. It will be a pleasure to present such Christmas trees as a gift to your loved one.

The next craft looks more voluminous. And to create it you will need several cones. You should use a thick cardboard cone as a base here. After which, the cone is covered with cones on all sides. In this work it is customary to use a cool gun. Once the glue has dried, cover the tree with large beads.

Simple tinsel trees.

If you read this article, you can learn how to do artificial Christmas tree at home. Above we offered you ideas for Christmas trees that were made from pine cones. Now we suggest using tinsel for this job. Naturally, for such a craft you must purchase the tinsel itself. For Christmas trees, make cones from cardboard. Then, glue tinsel to them. In this case, the tinsel should be glued to the cone in a spiral. While working, arm yourself with a glue gun.

Christmas tree made of candies.

The next tree may not only be beautiful decoration, but also very a nice gift. To make this craft, make a cone. Secure the candies on it with tape, and then wrap the Christmas tree with tinsel.

Simple and volumetric Christmas tree from paper.

The next craft is also very easy to make. She can become great decoration children's room in New Year holidays. To make it, prepare:

  • thick green cardboard,
  • markers, glitter, paints,
  • scissors and glue,
  • scotch.

Progress:

  1. We bend a sheet of cardboard in half and use scissors to cut it along the fold.
  2. We put the two parts that you got together and bend them in half again.
  3. Opposite the fold, using a marker, draw half of the Christmas tree.
  4. Now cut along the drawn line. As a result, you will get 2 Christmas trees that will not differ in any way from each other.
  5. Using gentle movements, bend each tree in half. Mark the center.
  6. Next, make a cut on one of the trees. The cut should be long from the very apex to the midline. For another tree, the cut should be from bottom to middle.
  7. Now we connect the trees by inserting them into the resulting cuts.
  8. To make the tree more stable, use tape.
  9. That's all, now start decorating your Christmas tree. Use your imagination and available materials here.




And here is another version of the Christmas tree, which you can make from old box from cardboard.

Elegant Christmas tree made of paper.

If you want to know how to make a beautiful Christmas tree, then next idea created especially for you. For such a Christmas tree, prepare:

  • colored paper,
  • scotch,
  • glue and scissors.

The most difficult thing is to cut strips of colored paper, which must have the same length and width. In this case, each strip must be glued together with tape to form a loop. After which all the loops are glued to a strip of tape.

You should wrap a thick cardboard cone with similar garlands.

How to make a glowing Christmas tree.

If you decide to find out how to do christmas tree with your own hands, then you are on the right track. Above we have described some simple crafts. Now it’s time to engage in serious creativity in order to do something original.

For a creative Christmas tree, prepare:

  • Flower floristic sphere. For this case, we recommend buying more than one shade of green.
  • Scissors, PVA glue.
  • Thick cardboard for the cone.
  • Cellophane, pins, garland, floral wire.
  • Various decorations.

Progress:

  1. First, we make a cone from cardboard.
  2. Wrap the cone in cellophane.
  3. We dilute glue with water in a container.
  4. We cut the floral mesh into pieces and place each piece in a container with glue and water.
  5. Now glue the pieces onto the cone. In this case, the joints are glued again for reliability.
  6. Use pins to prevent your craft from coming apart at the seams.
  7. As a result, you have the first layer of the tree. Make the second layer in the same way. Remember that after gluing the second layer, the structure must dry well.
  8. If the glue is dry, remove your tree from the cone.
  9. A garland is placed inside the tree.
  10. Now simply decorate the Christmas tree as you wish.

Christmas tree made of threads.

If you want to have something unusual for the New Year in your home, then in addition to standard decorations, decorate your home various crafts New Year themed.

Creating your next Christmas tree is also quite easy to handle. Take a sheet of Whatman paper and make a cone out of it. Coat the cone with glue and begin wrapping it with green thread.

When the glue is dry, separate the cone from the paper.

Decorate the finished Christmas tree with various accessories. You also glue the decorations to the tree using glue.

Finally

Celebrate your New Year brightly! Make many different Christmas trees that can make the atmosphere in your home truly magical.

2.

3.

4.

5.

6.

OPTION 2

Very original Christmas tree you can make it with your own hands from pine cones. But we will not use the whole cones, but will use only their scales so that the tree is not too bulky.

So, first, let's separate its scales from the cone. This can be done sharp knife, nippers or pruning shears.

2.

3.

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We roll the paper into a cone, glue it on the sides and cut off the excess at the base.



Then we simply take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, or, like here, on top of each other.

You can glue a spice like cloves to the very top of your head)

9.
After the glue has dried, you can start painting our beauty. To do this, you can use spray paint or regular paint. acrylic paint. If you choose acrylic paint with a metallic effect, your Christmas tree will look much more impressive.

10.
Then we cover the ends of the “twigs” with PVA glue and sprinkle glitter on them.

11.

Using exactly the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

OPTION 3

Knitted option:

OPTION 4

From threads:


OPTION 5


Handmade New Year's toys are always something special. They bring warmth and homeliness and are certainly an interesting gift. In addition, they are always original and will undoubtedly attract the attention of all guests.

At the same time, do New Year's toys It’s not at all difficult to do it yourself. Let's start with these Christmas trees :)


To begin, we will cut out blanks for future Christmas trees from thick cardboard (my Christmas trees are 12 cm high and 9 cm wide). I use kraft cardboard for this - it is thick enough to withstand a wide variety of manipulations, and also pleasant to look at.


Option 1. Lace plus paper. Production time 15 minutes.

Using a sewing machine, sew cotton lace to the bottom edge of the Christmas tree. In order not to make a mistake with the length of a piece of lace, I first sew it on and then cut it off.


We retreat from the sewn edge a distance of about one and a half times greater than the width of the lace, and sew on the next frill. To prevent the lace from creeping up or down during the sewing process, I make a mark with a pencil where I need to arrive.

In the same way we sew all the frills onto the Christmas tree.


From scrapbooking paper we cut out pieces one and a half times wider than the width of the lace, one of the long edges of which is made into lace using a hole punch or curly scissors.

Carefully glue the strips under the lace, and sew them on a machine if desired.

We make the top like this.


We cut off the excess paper. As a result, we get a Christmas tree like this. You can apply glitter, snow flakes, glue pearls on it - in general, decorate it to your liking.

The reverse looks like this, but that doesn’t bother us for now :), we’ll deal with it a little later.


Variants of the same Christmas tree: instead of paper lace, you can use any ribbons sewn in the same way as lace; or decorative ribbons with roses

Option 2. Lace plus mini buttons. Production time 15 minutes.

We start in the same way as in the first option - sew on the lace.


We wait 1-2 minutes for the glue to “set” a little, after which we glue mini-buttons onto it in a chaotic manner.

In general, I am a big fan of sewn buttons, but in this case my hand trembled :), and I decided to put the needle and thread aside and use a simpler and faster method.

Other variations on the same theme: instead of mini-buttons - any ordinary buttons or rhinestones or pearls or small paper roses.

OPTION 6

From tinsel

OPTION 7

A simpler version of a Christmas tree made from ribbons is to simply attach a ribbon folded in half to the base. Moreover, you can attach it as satin ribbons, and paper (paper for scrapbooking).

OPTION 8

OPTION 9

New Year is not only about gifts and lots of goodies. On the eve of the holiday, you can give your child the joy of creativity and self-expression. Admiring an already “decorated” Christmas tree is, of course, great, but it’s much more interesting to make decorations with your own hands and watch how the house gradually turns into a fabulous one New Year's forest! What would a forest be like without a Christmas tree? We invite you to make an amazing New Year tree , which will be an excellent holiday decoration for your home.

To work we need a tight green paper, glue, scissors, round wooden stick and bead.

1. Cut out 3-4 circles of different diameters from thick green paper. We fold each circle in half four times and draw it along the fold line several times with a hard object. Using scissors, cut a small piece from the top of each folded circle.

2. Take wooden stick and put the most on it small circle. The tip of the stick should protrude no more than 5 mm. Carefully place the remaining circles through the bottom of the stick. A hole in the top of his head great circle Lubricate with glue and attach the circle to the stick with glue. This is how we fix our entire structure.

3. Now our Christmas tree can be attached to the base. For example, to wine cork. We put a bead on the top of the Christmas tree, where we left a gap of 5 mm. Our Christmas tree is ready!

OPTION 10

DIY New Year's toy - “coffee tree”


It often happens that the holidays are just around the corner, but you still aren’t in a festive mood. And I really want, like in childhood, to wait for the arrival of the New Year, miracles, gifts and the fulfillment of desires. From my own experience, I can say that mood is born from little things and often comes in the creative process. To feel the coming holidays, you can decorate your apartment for the New Year, start cooking or making something special. For example, a fragrant Christmas tree made of fabric and coffee. Why not? Moreover, the materials for this wonderful Christmas tree you need a little.

Materials for creation coffee tree with your own hands:
sheet of cardboard small jar, for example, from under baby food coffee beans a small piece of fabric or burlap varnish (you can do without coating) Almost everyone also has the tools necessary for the work.

Tools for making a Christmas tree from coffee beans and fabric:
tweezers compasses glue (it is very convenient to use a hot glue gun) brush scissors needle and thread We do not indicate the sizes and quantities, since it all depends on what materials you use, as well as on the expected size of the Christmas tree. The process of creating this tree is simple and exciting. You can turn on your favorite one in the background New Year's film, and you will immediately feel that the New Year is very close, and miracles are knocking on your doors.

Making a coffee tree with your own hands
We make a cone from cardboard or thick paper. If you need a larger Christmas tree, you can use leftover wallpaper for the base. We glue the cone well around the edges. We put it on the table, check that it should be stable and tight.

We select a suitable size jar with a screw-on lid for the base.


Glue coffee beans onto the jar. The grains need to be glued on the same side, so the jar will look neater. It is convenient to take the grains with tweezers to protect your fingers from glue and burns (if you use a hot glue gun).


When the coffee beans are securely attached to the can, we proceed to the second layer, which we use to close any possible cracks and gaps between the beans.


The result should be a jar that looks like it consists of coffee beans. Only the neck is not covered so that the jar can be closed with a lid. The grains on the jar can be varnished. Then the leg of the tree will be smoother and glossier, but this will reduce the coffee aroma.


Let's get to the Christmas tree itself. If the size of the Christmas tree is large, and the frame (cardboard cone) does not seem rigid and stable enough, then it can be strengthened by simply filling it with something from the inside. This could be paper, napkins, fabric, etc. We cut the fabric or burlap for the external decoration of the Christmas tree to the size of the cone.


Glue the fabric to the cone, stretching and smoothing it.


Cover the bottom with a circle of cardboard.


We also cover the circle with cloth.


We will decorate the Christmas tree with patches. To do this, cut out identical small squares from fabric.


We remove several threads along the edges of the squares to form a neat fringe.



We glue the patches to the fabric on the cone. Glue coffee beans to the corners of each patch. This way we decorate the entire cone.

8.



Now that the cone and jar are ready, let's move on to the lid of the jar. It must be decorated and glued to the bottom of the cone. If desired, it can be decorated with coffee beans (gluing the edges with them) or fabric (we will dwell on this method in more detail). Cut a thin strip from the fabric. Using a needle and thread, we form equal folds on a strip of fabric, and then glue the fabric to the lid.


All that's left is to glue the lid to the bottom of the cone.



New Year's decoration is ready! It can also serve as a nice gift, either on its own or as a jar of coffee. Christmas decoration Festive mood and miracles to you!

AND A FEW CREATIVE IDEAS:


THANK YOU FOR YOUR ATTENTION!!!

New Year's DIY Christmas tree craft. Miniature sesal Christmas tree.
How to make such a craft is shown in the photo. For the craft you need the following: sisal cloth, wooden skewer, bottle cap, coin, piece of fabric from natural fiber, glue and beads.

The tree stump will be made of cork.
We cut the bottle cap in half and glue a coin at the bottom for stability.
In the center of the upper part we make a small hole for the barrel.




The barrel will be made from a wooden skewer (any length to your taste - break off the size you need) Let's make a barrel. The skewer needs to be strengthened in the cork by 1 cm and glued with glue.


Decorating our tree stump. Using a compass, draw a circle on a piece of fabric, the radius of which is equal to: the diameter of the hemp + its height + 1 cm for the assembly. We cut out a circle. We gather the edge of the fabric with a “forward needle” seam, departing 0.5 cm from the edge. Leave the ends of the threads on the front side of the fabric. We place the barrel in the middle of the circle and tighten the thread around the barrel, tying a bow. You can put beads on the ends of the threads.



We form the crown. We cut the sisal fabric into strips of different widths, depending on how “fluffy” we want the Christmas tree to be. We cut each strip into equilateral triangles and arrange them according to size.




Everything is ready to make our craft. We put triangles on the skewer, starting with the smallest. In order for the Christmas tree to be fluffy, the legs (corners of the triangle) must be directed in different directions, randomly.


Decorate the top of the Christmas tree with a bead and all the leaves too. To keep the beads in place, they are glued with glue.

The craft is ready! Let her make you happy on New Year's Eve.

The original beautiful Christmas tree will decorate the festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This interesting tabletop craft can be made from the simplest things that are found in every home.

Necessary materials:

  • A4 sheet, cardboard;
  • dense threads (preferably wool mixture);
  • 2 “yolks” from kinders;
  • wooden sushi sticks;
  • plasticine;
  • Styrofoam;
  • stationery knife;
  • stroke corrector;
  • red nail polish;
  • PVA glue;
  • fabric scraps;
  • little things for decoration.

Make the frame of the future Christmas tree from A4 sheet - roll it into a ball. Insert foam inside.

Apply glue to the surface of the cone in thin stripes and wind a thread around it.

Secure the end of the thread with glue.

Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.

While they are drying, make boots from the “yolks”, as shown in the photo.

Fill them halfway with plasticine and wrap them in cloth.

Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!

You can make a hat out of cardboard, cover it with fabric and sew on a pompom.

DIY shabby chic style Christmas tree

Let's make this amazingly beautiful and original craft V fashionable style shabby chic.

Necessary materials.

For the base we take a large one Paper cup or any plastic dishes. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top to the trunk and attach the cone.

We wrap the base of the tree with white fur.

We cut off the excess from below.

Then we bend the ends of the burlap inward and attach it with hot glue.

Let's get to the fun part - decorating our Christmas tree in shabby chic style.

To create the finished composition we will need a stand.

From bamboo napkin we make a bench.

From white fur- snowman.

We attach a bell to the top of the spruce.

We decorate the New Year tree with beads, pearls, flowers, lace, etc.

Apply transparent glue to the very top of the tree.

And sprinkle with artificial snow.

We do the same with the bench.

Our composition " Winter's Tale"Ready!

Decorative Christmas tree made from napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.

The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.

Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.

We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.

We fasten this square in the center with a stapler.

Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.

This way a rose is formed. If the finished rose seems uneven to you, you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.

I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only bottom layer flower. We simply tear it off (the bottom layer). The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.

DIY decorative Christmas tree made from napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another option for a Christmas tree made from napkins

Crafts made from cones, balls, ribbons and beads

How to make such a craft - watch the video tutorial at the end of the article.

Christmas tree made of plasticine with candies

What do we all associate with wonderful holiday New Year? With the smell of pine needles, bright lights, garlands, sweets. And children still create unusual crafts with your own hands, thereby bringing closer the pleasant moment of the onset of a fabulous night. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.

We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely do beautiful souvenir, if you follow our tips, they are not difficult.

To sculpt a Christmas tree with your own hands, prepare:

  • green plasticine for the crown;
  • stump in the form of a cap or an empty spool of thread;
  • toothpick, red and white plasticine for sweets.

Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Certainly, small souvenir It doesn’t have to be green; any other color you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.

Knead the entire prepared block thoroughly in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Because the we're talking about O magical holiday, then it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.

For modeling Christmas tree decorations– small candies – use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious candies together. Stick on each red round white dot and press in the center with a toothpick. Glue the triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.

Glue all the resulting blanks to the crown. Beautiful New Year's craft it's almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).

And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This elegant option crafts for the New Year, which will be a great gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to get everything done.

How to make a card like this.

DIY felt Christmas tree

Let's do Christmas trees made of felt - this is excellent Christmas decoration and perfect for school or kindergarten.

Prepare for them:

  • Set of colored felt;
  • cotton wool;
  • glue "Moment" transparent;
  • any beads;
  • threads for knitting and sewing;
  • a needle;
  • scissors;
  • felt-tip pen.

Select matching colors felt. It can be different shades green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.

Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut 4 blanks into shape.

To give them a bulge, put a little cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.

Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.

Such simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.

From natural materials DIY video tutorial with foamiran flowers

Christmas tree sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.

Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma - festive composition It will also set the appropriate mood.

Materials for the master class:

  • Citrus peel;
  • orange essential oil;
  • threads, needle;
  • beads, beads, sequins;
  • satin ribbon;
  • green cotton fabric;
  • scissors and pencil.

Draw a spruce template on a piece of paper and cut it out.

Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.

From thin green cotton fabric, cut out two blanks according to the template, fold them right sides inside and sweep away.

If possible, sew and finish the edge on sewing machine, if this is not possible, process the edges manually.

Turn out.

Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.

We fill the craft with aromatic citrus peels and sew up the edge.

If desired, you can decorate the sachet tree with your own hands different beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight and beautiful appearance will give you extraordinary and festive energy.

Photo of Christmas tree sachet with orange scent

Christmas tree toy made from pasta