What to make a Christmas tree from for crafts. Paper Christmas tree: master class

February 23
09.08.2019

On the eve of the New Year, making Christmas trees with your own hands becomes relevant. Volumetric Christmas trees made from colored paper will perfectly decorate an apartment. Such creative gift will become pleasant surprise, especially if it is made together with children.

It will be very fun to make such a Christmas tree with children.

These Christmas trees will perfectly decorate your apartment on a festive night.

Before the New Year it is very popular to make Christmas trees out of paper.

To make this craft you will need green corrugated paper, PVA glue, green cardboard, scissors, and a toothpick.

Before you start making the Christmas tree, you should prepare the main tool for rolling paper “rolls”. To do this, the edges of the toothpick are cut off. Make a small cut on one side with a knife, slightly dividing it in half.

It’s not difficult to make such a Christmas tree

To create such a Christmas tree, prepare paper, glue and scissors.

Stages of making a Christmas tree

Draw on cardboard using a compass big circle. Next cut it out. This will be the basis of the future Christmas tree.

  1. In order to roll the resulting circle into a cone, it should be connected in half and cut along the fold. Form a cone from the resulting semicircle. Glue the junction of the edge of the cone with its base with glue. Wait a few minutes to allow the glue to bond the cardboard well and dry.
  2. To make strips for quilling, take green corrugated paper and apply 1.5 centimeter wide sections on it.
  3. Make frequent cuts along the entire length of the resulting ribbons, without reaching the edge. This will create a fringe of tree needles.
  4. To make the main element of paper rolling, a spiral, one end of the strip is inserted into the forked part of a toothpick and a piece of paper is wound along the entire length onto the toothpick. In this case, it is better to twist the toothpick itself, and not the tape. To obtain identical elements, try to twist evenly and neatly.
  5. To prevent the rolled paper roll from unwinding, the free end is glued to the base. Let the glue dry.
  6. After all the elements are made, to give them the correct volume, you need to carefully fluff the cut fringe on them.
  7. Glue the prepared paper rolls onto the cone. It is better to start doing this from the top of the cone. To do this, the pointed end is smeared with glue and the element is put on it.
  8. Press the part. Next, cover the entire cone with fluffy spirals.

The New Year tree will look brighter if it is decorated with bows and balls from corrugated paper. To do this, you can roll multi-colored balls or squares out of it, connected in half, tying it in the middle with a thread. Glue the made Christmas tree decorations.

Such Christmas trees will create a festive atmosphere in the apartment.

To make your Christmas tree look beautiful, decorate it with bows

To make a Christmas tree, you can use the instructions

Christmas tree using quilling technique

The New Year tree using the quilling technique will become beautiful and original decoration holiday card.

To make a Christmas tree you will need A4 colored paper, scissors, a toothpick, PVA glue, a base for the Christmas tree (it can be colored cardboard or a postcard)

To make the Christmas tree look more creative, you can use paper spirals to make colored paper green, but in different shades. Roll 4-5 elements of each color.

  • On colored paper, draw stripes 3-5 millimeters wide and cut.
  • Next, use a toothpick to start making paper rolls. To do this, insert one edge into the cut on the toothpick made with a knife and twist it evenly. Instead of a toothpick, you can use wooden kebab skewers or a regular rod. Then you can simply wind it in the middle of the selected tool.
  • In order for the resulting spiral to be free, it is better to release it. When it opens up a little on the table, fasten it to the selected diameter.
  • For more interesting Christmas tree spiral bases can be twisted into different diameters.
  • It is best to start laying out the Christmas tree on cardboard from the top, taking the smallest element. They glued everything into a cone shape. It can be done in an uneven order.
  • The Christmas tree can be decorated with decorations in the form of twisted spirals of very small diameter or with beads.

You can use colored paper to make spirals.

A Christmas tree made using the quilling technique will be a beautiful and original decoration for a holiday card.

Christmas tree made from a cardboard toilet paper cylinder

An unconventional decoration for a New Year's room can be Christmas tree pendants made from a cardboard sleeve from toilet paper. Such holiday symbols can be hung as individual elements decor and garland.

For decoration you will need:

  • cardboard, inner part of toilet paper;
  • emerald or green acrylic paint;
  • bright ribbon;
  • flat parts for decoration. these can be buttons, rhinestones;
  • glue (moment crystal is perfect for gluing plastic; its transparent texture will be invisible, plus it dries instantly).
  • scissors.

When everything you need is prepared, you can start preparing the decoration.

Christmas trees made by yourself will perfectly decorate your apartment.

These Christmas trees can be hung on the ceiling or Christmas tree

Creating a Christmas tree this way is a little easier

First, the roll should be painted in several layers and allowed to dry thoroughly. This may take up to half an hour.

In order to make a spiral from a roll, you need to, starting from the top, cut it in a single line to the bottom 1.5 cm wide. The ends will be pointed.

In order to give the tree correct form, you should twist the cut strip into a coil. To fix the shape, place the resulting spiral under a heavy object, such as a stack of books, for 30-60 minutes.

Spin the future a little Christmas tree, and glue prepared round elements on the outside that will imitate balls. They can be arranged either in a chaotic order or according to a specific algorithm.

Glue a bright thin ribbon to the top of the craft. This could be a red ribbon to decorate flowers or even a thick thread or yarn.

Creating a Christmas tree yourself is not difficult

Christmas tree made of Japanese paper

For crafts, you can take either a special Japanese paper, or glossy cardboard in bright colors.

You will also need: wrapping(magazine sheets with a bright image), White list A4, skewers, pencil, scissors, ruler, PVA glue.

For the base of the Christmas tree, cut a regular sheet of paper into strips 2 cm wide. Twist all the strips into circles. Attach all the elements to each other in a circle using glue. You should get a large circle of spirals. The width of the circle is arbitrary. The wider, the more stable the figure will be.

Cut two rectangles measuring 21 by 28 cm from cardboard. Bend each of them like an accordion so that the sides are 1.5 cm wide. Round the ends of the accordion.

Fold the piece in half, gluing it end to end. A semicircle is formed

Glue the resulting semicircles together to form a circle. It will be bottom row tree branches. You can replace the glue with wire by piercing both semicircles and twisting its ends.

Make two rectangles following sizes: 18 by 28, 16 by 28, 14 by 26, 12 by 26, 8 by 25, 6 by 23.

Make accordion shapes from all rectangles, connect identical semicircles into 6 circles.

Now you need to prepare the skewers. They need to be wrapped. To do this you will have to cut out bright leaf strip a few centimeters wide, wrap it in a spiral.

Place all the circles of branches on a skewer. There should be wider circles at the bottom.

The Christmas tree is a very beautiful decorative element

A Christmas tree made by yourself will perfectly complement the festive atmosphere

Suitable for creating such a Christmas tree glossy paper or cardboard

Christmas tree using origami technique

A Christmas tree made of green paper is very simple and quick to make using the origami technique. Not only children, but also adults will be happy to master the art. This technique It is attractive because figures can be made from it anywhere, without having additional tools at hand.

You will need green colored paper and scissors.

Instructions

  • Make a square out of paper.
  • First join in half by running your finger along the bend. Then unfold and bend in half diagonally on both sides. Expand. You will get a square with highlighted stripes.
  • Roll along the resulting preliminary bends, as shown in the figure.
  • Fold each side to the middle.
  • Unfold the resulting bend to form a pocket, and connect the edge of the pocket to the center.
  • Turn the corners of the Christmas tree outward, then fold them inward.
  • The tree will have 8 equal sides, which must be cut along the edges horizontally in 4 places.
  • Fold the cut sides down diagonally.
  • Bend the previous bend and tuck it inside the tree along the resulting line.
  • The top of the head can be stitched with a thread, making it Christmas tree toy or a pendant for interior decoration.

This Christmas tree can be made quickly and easily.

This Christmas tree can be made without additional funds.

Christmas tree made of paper strips

Many mothers prefer to make gifts for grandparents not only with their own hands, but also begin to instill a craving for creativity in their children. It will be interesting for young children to make such a Christmas tree themselves.

For this craft you will need multi-colored construction paper, scissors, and a sheet of cardboard.

Children 3-4 years old will be able to make blanks from strips on their own. For younger children, mothers can prepare them in advance.

  • Cut colored paper into even ribbons of the same width (1-1.5 cm), but of different lengths.
  • Spread the blanks with glue and glue them to the cardboard in a Christmas tree shape. Place longer pieces horizontally from below, gradually shortening their length towards the top of the tree.

These Christmas trees are very easy to make.

Such a Christmas tree will become great decoration Christmas trees or apartments

You can involve children in creating a Christmas tree

Volumetric Christmas tree made of old paper

For creation New Year's beauty you can use various available means. A product made from sheets will look especially interesting old paper or magazines.

This Christmas tree will look unusual

Christmas tree made on our own will perfectly decorate the interior

A quick and easy way to make such a New Year's decor item

  • Take 2 magazines, PVA glue.
  • Bend each sheet into 2 parts. Fold the protruding edge. You will get half a tree.
  • For the second half, perform the same procedure with the second magazine.
  • Glue both halves together to get finished Christmas tree. You can make a base by gluing a few wine corks to the bottom.

To make the Christmas tree look more creative, you can spray it around the edges with spray paint.

Video: How to make a Christmas tree out of paper with your own hands

50 photos of ideas for creating a Christmas tree out of paper with your own hands:

Are you getting ready for the holiday? Looking for interesting options handmade gifts, souvenirs and interior decorations? Read how to make a Christmas tree out of cardboard. You will have many new ideas for how to create simple products, which can be made together with the child, as well as complex large objects for room decoration.

How to make a Christmas tree out of cardboard with your own hands

There are a lot of ways to make this festive object. There are options for making meter-long floor decorations or small gifts that can be hung on the wall or placed on the table. All materials used are available and inexpensive, and handmade gives the things made a special zest and beauty.

If you need to make souvenirs in large quantities, but you don’t know at all how to make a Christmas tree out of cardboard and paper quickly, choose the methods indicated at the beginning. So below is enough big list possible options making Christmas trees:


  • design when cardboard cone circles of fleece are strung, decorated with white thread-grass, imitating a garland or frost;
  • a cone wrapped in a spiral with tinsel or decorated with rain.

The list includes those options where cardboard is both the base and decoration of the Christmas tree, that is, it remains visible. However, it often performs only the function of a frame, when it is completely covered with cones, candies, buttons, beads, elements and other decorations.

Tools and materials

Before you start studying the sections that tell you how to make a Christmas tree out of cardboard, it’s worth looking at the list of required accessories and what you need to purchase, in addition to the main material. By the way, it also happens different densities and structures. In some cases, it is more convenient to use colored cardboard for children's creativity, in others packaging will do. If possible, you should try a special one that looks like very thick paper with a metallic or pearlescent texture applied.

So, you will need the following:


As you can see, there is nothing complicated or expensive. The only tool you may not have at home is a heat gun. It is a heating device, inside of which special glue rods are installed that can melt under the influence of high temperature. In a viscous state, the composition passes through the nozzle and is squeezed out to the desired location. Thermal gun is convenient for connecting hard-to-reach elements and surfaces. It will be useful for making various crafts and decorative interior works. If you decide to do this constantly, you can purchase such a thing. If not, you can easily get by

The simplest Christmas trees

If your child asks how to make a Christmas tree out of cardboard, invite him and make some basic items together. If you decorate them in an original way, you will get good souvenirs for grandparents.

To make flat Christmas tree pendants from cardboard, you need to do the following:

  • find a template or make it yourself;
  • trace the outline on the cardboard;
  • cut carefully with scissors;
  • if you need a loop for hanging, you can make it using a needle and thread or glue a ribbon. To close the ends, you need to easily glue decorative element in this place, or make a Christmas tree from two parts and insert a loop between them;
  • decorate the product with any materials.

More effective and nice option− an outline with a cut out middle or an openwork decorative pattern on cardboard.

Christmas tree glued together from parts

This method makes it easy to get a voluminous souvenir that can be hung or placed. If you are wondering how to make a Christmas tree out of cardboard quickly and beautifully, then this method is for you. The start of work will be as in previous version, only you will need at least three parts, but more are possible.

The 3D effect is created due to a certain method of gluing parts. So, do the following:

  • every cardboard blank fold along the axis of symmetry;
  • Glue or apply glue on the inside along these lines;
  • connect all the parts (no need to glue the ends of the branches).

As is the case with flat Christmas tree, here you can attach a pendant loop and make an openwork cut-out pattern. Such objects turn out to be light, airy and original.

Assembled souvenir made according to a template

You already know how to make a Christmas tree out of cardboard in a simple way. Now it’s time to complicate the task. This option will look original and unusual.

Even boys will be interested in assembling the parts, because they resemble a construction set. If you like to design all kinds of patterns, create your own Christmas tree template. As a first experience, it is better to use a ready-made one.

Large indoor Christmas trees

If you are looking for ways to make a Christmas tree out of cardboard that will replace a real one and can fully decorate a room, use these options:

Combination of materials

Cardboard can act both as a base and as decoration. The combination of different elements and manufacturing methods will allow you to create the most original version New Year's decoration. Want to learn how to make a Christmas tree out of cardboard and tinsel? Read on:

  • cut out the blank for the cone the right size;
  • roll the part and glue the joint;
  • paint the Christmas tree in a suitable shade;
  • wrap tinsel in a spiral using a heat gun, PVA glue or thread with a needle;
  • decorate if necessary.

Now you know how to make a Christmas tree from cardboard and tinsel. In addition, you can use rain. It is used as an additional decoration or main one. To obtain unusual souvenir, do this:

  • glue the cone;
  • cover it with a layer of paint of the color you like;
  • attach the rain tape to the top;
  • distribute the strips evenly over the surface of the cone;
  • If you are making a large interior object, glue as many layers of rain as needed in tiers to the base.

You understand how to make a Christmas tree out of cardboard and rain, but there are also other ideas using additional materials. You need to give free rein to your imagination and engage in the creative process.

How to make a star for a Christmas tree out of cardboard

Just like with the tree itself, here you can choose different ways. They are as follows:

If you want to learn how to make a cardboard Christmas tree star using a template, see the picture below.

So, you have seen many ways to make a Christmas tree out of cardboard with your own hands. Different shapes and Additional materials decor will allow you to create a magnificent souvenir for New Year's holiday or a large interior decoration.

Do-it-yourself voluminous Christmas tree made of cardboard. The Master's Secret brings to your attention a pre-New Year's tree design made from cardboard or thick paper. This universal design can be assembled and disassembled in right time years and used as tabletop tree, and in the office also serve as an office organizer. When making a Christmas tree from thick green paper or thin plastic, the tree can be sent by letter as original congratulations. To make the Christmas tree itself or stencils, a project file is available for download. The design of the Christmas tree allows it to be cut using stationery knife or scissors. The contours of the blanks are simple and do not require special cutting skills.

How to make a Christmas tree from cardboard with your own hands

1. Download the Christmas tree project file, pdf file format.
2. Decide on the material for production homemade Christmas tree. For big Christmas tree Such improvised material as corrugated cardboard works well; it is very convenient to use thin corrugated cardboard from various gadgets. But it is also permissible to use thick paper. It is convenient to immediately apply the boundaries of parts onto thick paper using a printer.

3. Format the image to the desired size. We print the project file onto thick paper for cutting and assembling a Christmas tree or for making stencils. If printing is carried out on thick paper, then the third sheet of the project is printed 4 times. The drawings are transferred from the stencils onto the cardboard. If you don’t have a printer, stencils can be made by tracing the contours of the details of the Christmas tree project into the light of a sheet placed on the monitor.
4. We cut out 10 craft parts of three types with our own hands. Please note that the width of the lock slots for assembly must be no more than thickness the material used. You need to cut 4 small pieces, 4 medium pieces, one large piece with a slot in the center at the bottom, and one large piece with a slot in the center at the top. See photos and videos.

Medium blank

Small workpiece

Transferring contours

5. It’s good if the paper or cardboard is green. If such material was not available, then the blanks must be painted on both sides. IN this option white water-based paint was used with the color that was used for. It is acceptable to use other types of paints or paint the tree after assembly.
6. The star on the top of the head is made using the appliqué method - gluing red paper.

Star applique

7. Before assembly, you need to check the width of the slots and, if necessary, correct them with scissors.

8. The assembly scheme is simple and is carried out in five stages. First, two large pieces are joined together. Then four small ones are connected to each other. Please note that the connection of the first and fourth parts is carried out with a lock and the parts must be bent when connecting. Next, the four middle blanks are also connected to each other. At the fifth stage, medium-sized ones are installed on small workpieces. And finally, large blanks are placed on top of the locks. At making the right choice The width of the slots results in a rigid structure for a homemade Christmas tree.

The original beautiful Christmas tree will decorate the festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This interesting tabletop craft can be made from the simplest things that are found in every home.

Necessary materials:

  • A4 sheet, cardboard;
  • dense threads (preferably wool mixture);
  • 2 “yolks” from kinders;
  • wooden sushi sticks;
  • plasticine;
  • Styrofoam;
  • stationery knife;
  • stroke corrector;
  • red nail polish;
  • PVA glue;
  • fabric scraps;
  • little things for decoration.

Make the frame of the future Christmas tree from an A4 sheet - roll it into a ball. Insert foam inside.

Apply glue to the surface of the cone in thin strips and wind a thread around it.

Secure the end of the thread with glue.

Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.

While they are drying, make boots from the “yolks”, as shown in the photo.

Fill them halfway with plasticine and wrap them in cloth.

Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!

You can make a hat out of cardboard, cover it with fabric and sew on a pompom.

DIY shabby chic style Christmas tree

Let's make this amazingly beautiful and original craft V fashionable style shabby chic.

Necessary materials.

For the base we take a large one Paper cup or any plastic dishes. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top to the trunk and attach the cone.

We wrap the base of the tree with white fur.

We cut off the excess from below.

Then we bend the ends of the burlap inward and attach it with hot glue.

Let's get to the fun part - decorating our Christmas tree in shabby chic style.

To create the finished composition we will need a stand.

From bamboo napkin we make a bench.

From white fur- snowman.

We attach a bell to the top of the spruce.

We decorate the New Year tree with beads, pearls, flowers, lace, etc.

Apply transparent glue to the very top of the tree.

And sprinkle with artificial snow.

We do the same with the bench.

Our composition " Winter's Tale"Ready!

Decorative Christmas tree made from napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.

The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.

Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.

We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.

We fasten this square in the center with a stapler.

Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.

This way a rose is formed. If the finished rose seems uneven to you, then you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.

I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only bottom layer flower. We simply tear it off (the bottom layer). The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.

DIY decorative Christmas tree made from napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another option for a Christmas tree made from napkins

Crafts made from cones, balls, ribbons and beads

How to make such a craft - watch the video tutorial at the end of the article.

Christmas tree made of plasticine with candies

What do we all associate with wonderful holiday New Year? With the smell of pine needles, bright lights, garlands, sweets. And children still create unusual crafts with your own hands, thereby bringing closer the pleasant moment of the onset of a fabulous night. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.

We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely do beautiful souvenir, if you follow our tips, they are not difficult.

To sculpt a Christmas tree with your own hands, prepare:

  • green plasticine for the crown;
  • stump in the form of a cap or an empty spool of thread;
  • toothpick, red and white plasticine for sweets.

Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Certainly, small souvenir It doesn’t have to be green; any other color you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.

Knead the entire prepared block thoroughly in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Because the we're talking about about a magical holiday, it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.

For modeling Christmas tree decorations– small candies – use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious candies together. Stick on each red round white dot and press in the center with a toothpick. Glue the triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.

Glue all the resulting blanks to the crown. Beautiful New Year's craft it's almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).

And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This elegant option crafts for the New Year, which will be an excellent gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to get everything done.

How to make a card like this.

DIY felt Christmas tree

Let's do Christmas trees made of felt - this is excellent Christmas decoration and perfect for school or kindergarten.

Prepare for them:

  • Set of colored felt;
  • cotton wool;
  • glue "Moment" transparent;
  • any beads;
  • threads for knitting and sewing;
  • a needle;
  • scissors;
  • felt-tip pen.

Select matching colors felt. It can be different shades green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.

Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut 4 blanks into shape.

To give them a bulge, put a little cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.

Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.

Such simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.

From natural materials DIY video tutorial with foamiran flowers

Christmas tree sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.

Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma - festive composition It will also set the appropriate mood.

Materials for the master class:

  • Citrus peel;
  • orange essential oil;
  • threads, needle;
  • beads, beads, sequins;
  • satin ribbon;
  • green cotton fabric;
  • scissors and pencil.

Draw a spruce template on a piece of paper and cut it out.

Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.

From thin green cotton fabric, cut out two blanks according to the template, fold them right sides inside and sweep away.

If possible, sew and finish the edge on sewing machine, if this is not possible, process the edges manually.

Turn out.

Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.

We fill the craft with aromatic citrus peels and sew up the edge.

If desired, you can decorate the sachet tree with your own hands different beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight and beautiful appearance will give you extraordinary and festive energy.

Photo of Christmas tree sachet with orange scent

Christmas tree toy made from pasta

Autumn is the time when many people begin to think about their long-awaited holiday per year. We are talking about New Year's preparations, which are associated with loved ones and friends, a cheerful feast, gifts and, of course, holiday decorations. Most people want to decorate their home New Year's decor, which is conducive to celebration and creates a special atmosphere.

Today you can buy any decoration in the store, but there is nothing nicer than handmade crafts. Hurry up to please yourself with the preparations for yourself magical holiday, without which it is difficult to imagine winter time of the year.

How to make a Christmas tree at home?

Today, there are many materials from which you can create a magnificent Christmas tree that will fit perfectly into your interior.


There are a huge number of various master classes with which you can learn how to make a Christmas tree with your own hands.

Christmas tree made of pine cones

A Christmas tree made from pine cones will become a stunning decorative element; it can decorate New Year's table or even make a great gift. In order to make such a decoration, you need to prepare the following materials:

  • identical cones;
  • strong cardboard paper;
  • pencil;
  • glue;
  • scissors;
  • glitter and gold paint.

First you need to take cardboard and roll it into a cone shape, seal the joint with glue. We use scissors to separate the scales from Christmas tree cones, since you will need quite a lot of them. After this, the cardboard cone is carefully covered with scales, starting from the very bottom.

If you like the original look, you don’t have to use paint and other decorative elements, but with their help you can add shine and charm to the tree.

The paint is applied with a brush; when it dries, the craft can be decorated with glitter, tinsel, ribbons and other decorative elements.

Christmas tree made from single-layer napkins

To create this decoration you will need napkins, thick cardboard and beads. Initially, we construct a cone from cardboard paper which will serve as a solid foundation. It is necessary to ensure that the cone has smooth edges and didn't fall over on its side.

Then we take the napkins and cut them along the folds, fold them in three and make cuts again. We fold them again and cut them, in the end you should get a small square equal to 1/9 of this napkin.

We use a stapler to fasten it in the central part. Then we cut out a circle from the square, and gradually bending its layers, we create a rose.

If the resulting flower is slightly uneven, you can always correct it with scissors. The number of roses depends on the size of the cone. When they are ready, use glue and begin gluing the flowers from the very top of the head.

You can take napkins of several colors, then the Christmas tree will turn out brighter and more original. After all the roses are glued, take the beads and also glue them in some places.


You can decorate this craft with anything, it is easy to make and does not require any special expenses.

Christmas tree made from paper and cardboard

This craft is very easy to make, and it looks elegant and original. Using corrugated paper, the Christmas tree will turn out quite fluffy. To create it you will need:

  • glue;
  • green corrugated paper;
  • scissors;
  • cardboard;
  • various decor to taste.

Make a cone-shaped base from cardboard, the size depends on your wishes. To make it visible, it is recommended to cover the cone with green paper.

The needles are made from corrugated needles, finely chopped into small strips. Then these stripes are cut even smaller; they should resemble a fringe. We use toothpicks to wrap paper around them and get small flowers, there should be at least a hundred of them.

After this, they are glued to the cardboard base so that there are no gaps. The decor of the Christmas tree can be anything: ribbons, bows, beads, tinsel and much more.


Interesting ideas for making Christmas trees

A Christmas tree can also be made from pasta. To do this, you need to make a cardboard cone, which is glued pasta different shapes. After this, the decoration is painted in any color. Instead of pasta, you can use coffee beans, which can be decorated with golden sparkles and bows.

If you are familiar with the art of kanzashi, then make forest beauty it won't be difficult. To do this you need to use satin ribbons green and red colors. A photo of a DIY Christmas tree will serve as a pleasant reminder of the wonderful New Year holidays.

A unique decoration for your home will be a knowledge tree made from stacks of books. It can be decorated with tinsel, ribbons and bows, but it is highly not recommended to hang it with an electric garland.

Vytynanka is a type of Slavic art where jewelry is made from paper. They can often be seen on window panes, and making vytynanki is quite simple. To do this, you need to use paper with a pattern drawn on it. The pattern is then cut out with a sharp utility knife.

An interesting idea would be to create a Christmas tree out of cupcake tins. To do this, you need to cut off the bottom of the molds and string them onto a cone made of durable cardboard paper.

If you have empty thread spools, they are also ideal for crafts. The bottom row of coils is glued to a round solid base, with another row on top, the shape should resemble a cone. This decoration can be decorated with ribbons and sparkles.


A huge variety of Christmas trees that can be made at home will appeal to any needlewoman. Don't forget about materials like candy, feathers, felt, beads and more. From all this you can create a bright, elegant and stylish decoration that will be admired. Choose the Christmas tree option and don’t forget to make it with love!

DIY Christmas tree photo