Christmas sleigh with paper reindeer. Sleigh, snowman and Christmas tree made of jute and coffee beans

We suggest you make a very beautiful New Year's decor: miniature sleigh harnessed by reindeer. This decor is made from cardboard and paper. You can use it to decorate the mantelpiece; you can also install the sleigh under the Christmas tree in the living room or in the children's room.

The master class tells how to make a similar decor from cardboard and book pages, but you can choose a different paper and get a completely new look.

Our sleds are made in vintage style using the technique of artificial aging of paper.

So, for work we need:

Thick thick cardboard, 2-3 mm thick

Sheets of an unnecessary book or sheet music

Paper for scrapbooking in black and white

Small golden sparkles for decoration

Bituminous varnish or scrapbooking stamp pads for aging paper

Step 1. Cut out the details

Transfer this pattern to Corel or Word, give it the size you need and print it.

Using your templates, cut out cardboard and paper blanks for the sleigh and reindeer.

We cut out the inside of the sleigh from cardboard for scrapbooking

Step 2. Assembling parts and aging

Using bitumen varnish or stamp pads for scrapbooking, we tint the ends of the deer and sleigh. If you use bitumen varnish, then before starting work, it is better to coat the product clear varnish and let dry. This must be done so that the edges do not turn out too dark, because the paper absorbs the bitumen varnish very strongly.

Step 4. Assembling the sled

Glue all the parts of the sled as shown in the photos below.

Step 5. De-coloring

Decorate the reindeer blanket and the edges of the sleigh with glitter

Step 5: Stand

Cut out of cardboard and decorate a stand for the composition in the same style as the whole work and glue the composition to the stand. To do this, you can use transparent Moment glue or PVA.

We admire the result) Such a sleigh with deer can be given as a gift to your friends.

We also give you options for performing such a composition in a different color and stylistic solution.

We wish you a beautiful new year!!!

DIY New Year's sleigh. Master class with step by step photos

Salimova Evgenia Igorevna, teacher of MBDOU KINDERGARTEN No. 65 of a general developmental type with priority implementation of activities in the social and personal direction of development of children in Orel
Description: master class can be used by teachers, kindergarten teachers, educators in their work additional education, parents to create New Year's decorations.
Target: Creation festive mood.
Tasks:
- learn to use waste material to decorate the group.
- teach to show imagination and creative thinking.

Introduction.

Soon New Year! And the most important thing is to create a festive mood in children.
We all have Christmas tree, Santa Claus with his Snow Maiden under her, gifts in New Year's Eve. But is something missing? I decided to complement the image of Santa Claus with this sleigh with a horse.

Who is Santa Claus?

GRANDFATHER FROST (Morozko) - a mighty Russian pagan God, a character in Russian legends, in Slavic legends - the personification of Russians winter frosts, a blacksmith who freezes water with ice, generously showers winter nature with sparkling snowy silver, gives the joy of winter festivals, and, if necessary, in difficult times, protects Russians from advancing enemies by freezing hitherto unprecedented winter colds into the ice, from which iron begins to break.

Everyone knows that in Russia, Father Frost rides around on a sleigh drawn by three horses, skis or walks. However, sometimes a smaller number of horses in a team is enough for him. Troika is, of course, our everything. Unfortunately, unlike Santa's reindeer, no fairy tales have yet been written about Santa's horses. So I decided to create my own sleigh and white horse for our Santa Claus.
Material:
- cardboard box 2 pieces (one for the horse, the other for the sleigh)
- PVA glue
- acrylic paint, white.
- color for acrylic paint (blue, pink)
- new Year decoration, rain, tinsel.
Horse and sleigh templates:

Progress.
Let `s start!
We take any cardboard box. You determine the size yourself. My horse turned out to be 50cm high at the withers. Let's start with a cardboard box.

Let's draw a horse.

Afterwards we take stationery knife and cut the horse around the office. We draw the second half of the horse according to the office of the cut out first horse. The only thing is that I changed the position of my legs.

This is how my preparation turned out.

The position of the legs is clearly visible here.

Then we take acrylic paint and paint our blanks in White color. You need to paint 3 times to achieve good coverage.

While the main part of our work is drying, we draw and cut out the ears. We paint over it.

At this stage, work with the horse ends. We paint it over from time to time. While it’s drying, we’re working on the sleigh.
We also take the box and draw the outline of the sleigh. I drew the runners and the top separately. Cut it out.

Then we take PVA glue and a brush.

Glue the parts together. We make two such blanks.

We paint over it. One paint job is enough here. Since the color of the sleigh will not be white.

Now we cut out the seat from the remains of the boxes. Its size can be adjusted depending on your room. My width is 25 cm and height is 34 cm. We form the seat from two rectangles. We attach it to the runners using a stapler.

One of the rectangles is rounded at the top. Let's connect the parts together using a stapler.

We attach the second half of the sleigh.

Our blues are ready, all that remains is to repaint them in the color you want. And decorate.

Now let's start collecting the horse. We connect the two halves with a stapler.

We'll put small spacers inside from leftover cardboard.

We fasten our ears. You can draw the ears right away; I didn’t have enough space on the cardboard, so I drew them separately.

Now let's start decorating. Let's start with the mane.
Let's take the dodge. And using a stapler we attach it to the place of the mane.

We attach tinsel on top.

While working, I decided to change her tail, and I had to cut off the drawn one.

I made it out of rain. And decorated the horse. I glued the saddle, made golden hooves, and reins from snow beads. This is where your imagination works. And you can decorate it to your liking.

This is on the other side

And these sleighs after I decorated them. Gifts were placed inside.

Natalia Shaposhnikova

Our children's favorite holiday is New Year. The kids learn a lot of songs and dances for this holiday, but they do even more wonderful ones. paper crafts and more. Today I will show you how you can do simple craft from paper -"Sled".

1. Take a sheet paper(A4 format) and draw with a stencil sled

2. Mark the fold lines

3. Now we draw the fastening parts - 2 strips. The length should correspond to the width of the sled seat, plus 1 cm on each side for gluing.

4. Cut out the blanks and fold along the marked lines

5. Glue the strips to sledge from the inside

6. Cut from paper mat, we design it according to our wishes and glue it to the seat of the sled

7. Tie a thread (rain) - the sled is ready.

As you noticed - the craft is easy to make, the children cope on their own. Such sled can be used in children's games of different ages. Kids - roll small animals. Older children - use in more difficult games- organize competitions with each other, deliver goods to the store, etc.

Thank you for your attention.

Very soon the holiday beloved by many will come - New Year.

You can decorate yours festive table a wonderful original candy bowl in the shape of Santa Claus's Sleigh. She can also be great New Year's gift for your friends or loved ones.

This MK will help you make such a candy bowl with your own hands.

1. Cut out two blanks from cardboard for the sides (I had the so-called Electric cardboard, but the main thing was that the cardboard was fairly well pressed)

Can and print the first one on an A4 sheet and transfer it to cardboard.

2. Cut out the base for the sled from the same cardboard (in the archive - file 2) Here you will have to draw it yourself - I indicated all the dimensions in the drawing.

And also after cutting, we make grooves (for a ruler, for example, with a pen that has run out of ink) along the horizontal lines and two middle vertical ones - for better bending.
In the following figure, red arrows indicate the places of future gluing of parts and the combination of sizes

3. Let's start gluing.
I usually have right moment The required fabric color is not available.This time we caught our eye viscose napkins for cleaning. I really liked it - cheap and beautiful

Next, we do everything according to this principle - apply glue with a brush (I used furniture PVA) on a cardboard pattern, apply a napkin, smooth it out carefully, iron it through the cotton fabric with a heated iron, then cut off the remainder along the contour, iron it again

At this stage, it is important to pay attention to the following points:

When gluing the inside of the sled - “think three-dimensionally”, so that when assembling the product it doesn’t turn out that two patterns were glued equally, one on the inside, and one on the outside.Whoops, it should be like in this photo :-)

When ironing, be sure to underlay a piece of fabric (protect the iron from glue)

- When gluing the inside of the base of the sled, the gluing allowances also need to be glued, and when gluing the outside they must remain free of fabric

For the outside I used red fleece.

4. Assembling the product - the most difficult stage.

You need to be as careful and careful as possible.
You can first carefully mark the lines for gluing with chalk on the side parts, and then, having coated the parts of the base free from the fabric with glue, glue it to the sides - the problem is that you can’t get in here with an iron; you need to squeeze it tightly with your hands for several minutes to glue it (you can try some kind of then with glue like “Moment”, but for some reason I struggled with PVA)

5. glue along the entire length of the cuts decorative cord starting from the bottom of the sled to hide the cord joint

On the first sleds I glued the cord using “Globe” glue, and then it ended and I ended the last ones with “Moment”, and clearly expressed yellow color- very inconvenient - it leaves a mark on the fabric, but transparent contact glue is the way to go!I glued 10 cm gaps somewhere - and the glue does not have time to dry and you can hold the cord with your fingers so that it sticks well in all the "squiggles"

Do-it-yourself sleds are not sold in stores. A self-made sled will be powerful and capable of withstanding loads. But it’s also easy to do it yourself. You can decorate your holiday table with a wonderful original candy bowl in the shape of Santa Claus's Sleigh. Purchased sleds are not very durable, because... made of aluminum angle and bend immediately under heavy loads.

For such New Year's sleigh You can put an origami box with a surprise and give it to your friends as a gift! We offer Interesting idea packaging of New Year's gifts - Santa Claus's sleigh. There are other master classes for you on how to create [ New Year's crafts. On thick cardboard, draw the outline of the sleigh and cut out 2 copies.

DIY crafts

We tape the sleigh on each side. From more thin cardboard cut out a long rectangle. We bend the glue indent on both sides and glue it together as shown in the picture. We cut out a long thin strip of padding polyester (you can use cotton wool or decorative rope) and glue it along the edge of the sleigh to cover the cardboard.

We wait for the sleigh to dry and fill it with sweets. We invite you to make a very beautiful New Year's decor: a miniature sleigh drawn by reindeer. This decor is made from cardboard and paper. Our sleighs are made in vintage style using the technique of artificial aging of paper.

Using your templates, cut out cardboard and paper blanks for the sleigh and reindeer. Cut out of cardboard and decorate a stand for the composition in the same style as the whole work and glue the composition to the stand. We admire the result) Such a sleigh with deer can be given as a gift to your friends. We also give you options for performing such a composition in a different color and stylistic solution.

A beautiful, stately and spectacular Christmas tree is a necessary attribute of the New Year’s celebration, and in order for the Christmas tree to amaze with its splendor, it must be decorated accordingly. We take thick paper of two shades - white and red. We cut out all the components of the sled and paint them with silver spray paint.

We put Santa Claus's bag in the sleigh and admire the result. So we have achieved volume, our key has acquired the required thickness and antique effect, we paint it with gold paint from a spray can. Dear readers, today you learned how to make Christmas decorations made of paper, I hope you liked the ideas presented!

I’m shocked, the star is very beautiful, this year I’ll make a lot of these stars, paint them with gold paint, and hang only them and garlands on the tree (I’m tired of store-bought decorations). Below are two options for creating cards for the New Year - a 3D postcard and a clamshell postcard.

Christmas sleigh with paper reindeer is made from the simplest materials available at hand. Here are the first New Year's crafts! This work was done with imagination, you got an elegant horse - a symbol of the coming year, and an interesting sleigh - everything is simple, accessible and understandable.

The materials presented on the pages of our website were created by the site’s authors, sent by users, taken from open sources and presented on the site for informational purposes only. As we approach New Year's holidays not only children, but also adults are waiting for miracles and gifts.

Let's start making sleds with our own hands

In addition, Santa Claus's sleigh can be an original idea for gift wrapping or a stand for sweets and fruits. They are easy to make and take very little time to make. You can make this craft together with your child; he will be delighted with the New Year’s preparations and spending time together.

Paper star.

Some of them are suitable for working with children younger age, and there are also those that can be offered to older children. To create a craft, the following materials and tools will be useful: multi-colored thick cardboard, foil, scissors, paint, glue and various decorative elements. First you need to cut out the parts from which the child will later assemble Santa Claus's sleigh. From it you just need to cut out two parts in the shape of the sides, only a little smaller, and glue them to the base on the sides. You can decorate the sled using paints, stickers in the shape of snowflakes, etc.

First you need to find a suitable template, trace it on cardboard and cut out two parts. One of the copies should be glued corrugated paper and trim off the excess along the contour. The next step is to cut out the bottom of the sled. Cut out a rectangle of the desired width from cardboard, adding a centimeter on each side for indentation. Two strips should be cut out of padding polyester and glued to the sides, simulating snow and covering the un-glued edges of the cardboard.

This small gift Any child will like this candy. Following the instructions, Santa Claus's sweet sleigh can be made quickly and without special problems. To make the sleigh neat and beautiful, you need to select candies of the same size, while the wrappers should be bright and varied.

Santa Claus's sleigh is original idea for New Year's sweets and souvenirs. It can also be a great New Year's gift for your friends or loved ones.

Antique paper key.

A4 and transfer it to cardboard. 2. Cut out the base for the sled from the same cardboard (file 2 in the archive). Here you will have to draw it yourself - I indicated all the dimensions in the drawing. You need to be as careful and careful as possible. And of course, you and I, creative fidgets, will not pass by snowdrops and will make our own basket for snowdrops and the snowdrops themselves from candies.

The part is bent, divided into three parts: the base of the sled and two backs (small and large). Toy Snow Maiden and Santa Claus can be seated not just under Christmas tree, and into a sled made of cardboard.