Candy Christmas tree on a cardboard cone. Making a “sweet” Christmas tree from candies and tinsel

19.10.2019

The height of our Christmas tree turned out to be 35 cm, enough to make it the main accent of the center of the table, and also to present it as a gift to your friends. To make it, we will need a sheet of Whatman paper, a ruler and a pencil, a glue gun and a stapler, as well as delicious wrapped chocolates. For this master class we will need truffle sweets with a golden wrapper without tails, for example, you can buy “Autumn Waltz”, you will need about one and a half kilograms. If you bought gold-wrapped candies, you will also need gold spray paint. An additional decoration for your Christmas tree will be the “Star” tip, which you can make yourself using the origami technique using thick paper, and you can also decorate it with low plastic beads, which should match your “Star”, because we want to make a stylish decorative element, tastefully done.

Or you can make a green Christmas tree by choosing the appropriate wrapper, and additionally decorate it with tinsel with a small pile.
DIY candy tree performed on a cardboard cone-shaped base, which you can make yourself. You can also buy a foam “cone” base at a craft store or make it from a plastic bottle, but then the height of the base will be small. A sheet of whatman paper allows you to make such a base of any size.

To Christmas tree made from candies It turned out to be 35 cm in height, whatman paper needs to be cut in half. You can put one half aside for now; you will need it for other crafts. On the second part you need to draw half a circle, its radius should be equal to the desired height of the tree, in this case the radius of the semicircle will be equal to 35 cm. We carefully cut out the workpiece with stationery scissors and cut it in half. From one such semicircle the result will be two cones and two original Christmas trees.

We glue the edges with a hot gun and hold them a little with our fingers so that they adhere, and from below we additionally fix the edges using a stapler. You also need to cut out a circle from the cardboard - the bottom for the cone. To secure the bottom, its radius must be one and a half centimeters larger than the lower radius. Cuts need to be made along the larger circumference to create a thick fringe. The fringe needs to be folded and the bottom glued.

The Christmas tree is a symbol of the New Year - one of the most favorite holidays for children. What else do kids love? Of course, sweets... Today you will see a great idea on how to combine these main attributes and give a great mood to your friends and loved ones.
It’s quite easy to make a simple Christmas tree from any candy (truffles, chocolate, candy or even gummies), you can even make it together with your baby.

First master class

2. I take wallpaper (1.5 m wide) - so as not to miss the height. All my Christmas trees are 30-35 cm. For such a height, tinsel 2m long is enough. We make a compass from a pen and thread, draw a semicircle with a radius of the same height as the tree.

5. We twist a cone from a semicircle - the wall turns out to be double. Glue it together. I glue with hot glue because... it gives additional rigidity to the base, and there is no need to dry it. We make a base from penoplex (or polystyrene foam) - outline the bottom of the cone, cut it out. We bevel one edge at the bottom so that we can then insert it into our cone. We put the bottom aside, it will come in handy a little later, it can be covered with the same wallpaper.

6. Glue the tinsel in a circle using the same hot glue.

7. Then we glue the candies. If the candies are light, you can glue them with double-sided tape, but for me they are heavy, so I glue them with glue at the tip of the package. You don’t need to tear off the candy afterwards, you can just pull it out from the other side.

We glue the candies not completely in a full circle, because... The tinsel will need to be placed along the glued tails of the candies to the second row and further in a spiral.

9. We do everything in parallel - glued several candies, followed by tinsel.

10. When everything is pasted over, we trim the tinsel, if necessary, and this is what we get! If anyone succeeds in gluing the bottom with hot glue, that’s great; I didn’t succeed. I got out of the situation in the following way: because. I have penoplex with a height of 2 cm, I took 6 toothpicks, cut off the sharp ends by about 2 cm, I got mini nails, and stuck them through the wallpaper into the foam at the base (as if I nailed them with nails).

11. If you have a star or a beautiful bow, or something else to decorate the top of your head - good, if not (like me) - take a floral (or ordinary, but stiff) wire and make a star!

12. Attach the tip of thin gold tinsel to the beginning of the star, then wrap it around the wire along the entire frame, cut it, and glue the end of the tinsel on the other side.

13. The result is such beauty!

14. Attach the star to the top of the head.

15. Decorate with beads - carefully glue the first bead into the base of the star, then wrap the beads around the tree along the candies and at the end carefully glue the last bead at the base.

16. The result is such beauty! It took about 2 hours to do everything, 30-40 cm of one and a half meter wallpaper, a piece of penoplex, 800 grams. sweets, 2 m of silver tinsel, 65 cm of thin gold tinsel, 1 floral wire, about 2 m of beads, 1.5-2 pieces of 15-centimeter sticks for a glue gun and, of course, imagination!))) Good luck to everyone in their creative endeavors!

DIY candy tree. Second Master Klaas

To create a Christmas tree from candies you will need:

500-600 grams of sweets in a bright wrapper (in this case we used a truffle in a gold wrapper);

Thick cardboard;

Glue, scissors, double-sided tape;

Christmas tree decor (rain, small star for the top of the head). The color of the candy wrapper should not match the color of the Christmas tree decoration. If you decide to use rain, then choose it with a short “pile” so that the candies are not unnoticeable.

The process of creating a Christmas tree from candies:

The first step is to make a cone from thick cardboard - cut out a semicircle and wrap it. Glue the edges together with superglue, which bonds securely and sets quickly. Cut the bottom of the cone into strips, bend it inward and glue a circle on top, which will help make the base as stable as possible.

Advice: You can hide a small car or a soft toy inside the cone, you just need to think about how the tree will open.

Next, cover the cone with double-sided tape and remove both protective films. Next, glue a row of candies on the bottom. The candies must be pressed very carefully onto the tape, otherwise they will quickly fall off. And in this case, it is advisable to choose light weight ones. If you decide to use heavy chocolates, you can glue them with glue.

Decorate the top of the Christmas tree from candies - glue a light star (made of wood or foam) on top, then disguise the top with something suitable.

This New Year's candy can be a great gift for a loved one!

He'll tell you how to make a Christmas tree out of candy. tochka.net- the poems turned out just right! And all because the New Year's time is simply gushing with creativity, ideas and festive mood! So, how to make a Christmas tree from candies - a kind of elegant and sweet tree that will especially delight children and sweet-toothed adults? See useful and simple tips with photos in our article.

Of course, one of the main and unchanging attributes is the Christmas tree. If for some reason you don’t have a real New Year’s beauty, we’ll tell you how to make a Christmas tree out of candies so that the holiday can still take place.

Such a creative Christmas tree can be placed on your table, decorating your home or workplace, or you can give it to friends, and not only those who have children. After all, many adults have a great passion for sweets.

How to make a Christmas tree from tinsel candies on a foam base

How to make a Christmas tree from champagne and sweets with your own hands, photo © Depositphotos

To create such a tree you will need a piece of foam plastic, green paper, satin ribbons, a piece of green organza, double-sided tape, a hot glue gun and candy.

Cut a cone out of foam plastic and use double-sided tape to cover it with green paper on the sides and bottom. Tie the desired number of bows from satin ribbons, and cut out squares from organza, and together with the sweets, attach them to the cone using a glue gun.

How to make a Christmas tree from candies with your own hands, photo © etsy.com

For these purposes, it is better to take round-shaped candies in multi-colored shiny foil wrappers with convenient tips so that they can be easily removed from the wrapper without removing them from the tree. A Christmas tree made from identical and preferably expensive candies looks very elegant and stylish. You can also decorate the candy tree with rain, beads, and use bows and other decorations for the top.

How to make a Christmas tree from candies - jelly serpentine

It is much easier to work with jelly sweets than with wrapped candies. Using toothpicks, they can be easily attached to the cardboard base. To prevent such a Christmas tree from falling on its side, stuff tight lumps of paper inside the cardboard cone. It is better to arrange the jellies in the form of serpentine and spirals - such a Christmas tree will look colorful and cheerful.

How to make a Christmas tree from candies and wooden planks

How to make a Christmas tree from candies with your own hands © Depositphotos

If your boyfriend (or husband) is not devoid of skillful hands, imagination and a good mood, then building such a creative Christmas tree from wooden blocks mounted on a thin iron pole will not be difficult. Look how organically and brightly the multi-colored candies look against a green background. And after use, such a New Year's tree can easily be folded up until next year.

How to make a Christmas tree from candies - marmalade slices

How to make a Christmas tree from candies with your own hands © Depositphotos

If you wish, you can make a candy tree right on the plate. For this you will need marmalade slices, preferably green for credibility, and a handful of multi-colored dragees. Here you don’t even need to attach anything - just lay out a Christmas tree figurine from marmalades, as shown in the photo, scatter colored balls on it, make a stem, and in two minutes the New Year’s beauty is ready.

How to make a Christmas tree from candies - scattered assortment

How to make a Christmas tree from candies with your own hands © Depositphotos

And, perhaps, the simplest and fastest version of a sweet Christmas tree is an impromptu scattering of candies right on the table - such a treat on the desktop will sweeten the life of a colleague, will delight a child beyond words, or will pleasantly surprise a loved one on a tray in the morning with a cup of coffee in bed.

Christmas tree made of candies and bottles of champagne

You will need:

Empty bottle of champagne or wine

Scissors

Lots of small candies

Bright ribbon.

1. Place a piece of tape on each candy.

2. Start sticking the candies to the bottle using tape, starting at the bottom and working your way up to the neck of the bottle.

*Make sure that one end of the candy touches the end of the adjacent candy.

3. Glue each next row slightly higher than the previous one so that the candies overlap each other - this will make the tree more magnificent.

4. There should not be more than 4 candies on the top of the head. You can also add a bow or tape a star on it.

5. Pull the curled ribbon down from the top of the tree.

Christmas tree made of sweets and tinsel (master class)

You will need:

Double-sided tape

Regular tape

Small candies

Cardboard and scissors (for making a cone)

1. Using simple tape, glue candies to the cone, leaving small spaces between the rows of candies for tinsel.

2. Place double-sided tape in the gaps between the rows of candies and begin gluing tinsel to it.

3. Glue 3-4 candies to the top of the cone and also wrap them with tinsel.

DIY golden Christmas tree made from candies (photo instructions)

You will need:

Cardboard and scissors (to create a cone)

Double-sided tape or glue (PVA or hot glue)

Candies wrapped in gold foil (other candies if desired)

Beads on a string.

1. Cut out part of a circle from cardboard, twist it to form a cone, and secure the ends with glue.

2. Using double-sided tape or glue, begin gluing (from bottom to top) the golden candies to the cone. They should fit closely together to hide as many empty spaces as possible.

3. The gaps between the candies can be covered with beautiful beads on a string or tinsel of a suitable color.

4. You can make a star, and, if necessary, paint it or cover it with foil. You can add a bow.

DIY chocolate candy tree (master class)

You will need:

Thick cardboard and scissors (to create a cone)

Glue (PVA or hot glue) or tape

Scissors

Chocolates (truffles) in shiny wrapper.

1. Roll a cone out of cardboard and secure the ends. Cut off any excess so that the cone sits evenly on the table.

2. Using tape or glue, begin gluing the candies to the cone. Cover the entire surface of the cone with candy.

3. Start decorating the tree to your liking. You can use beads, tinsel, bows, ribbons, “rain”, and you can attach a star made of paper or foil to the top of the head.

How to make a Christmas tree from soft candies

You will need:

Foam cone

Lots of soft (jelly) candies of different colors

Toothpicks.

Use toothpicks to attach the candies to the cone.

You don't have to use the whole toothpick - you can break it into two pieces.

Simply insert one end of the toothpick into the candy and the other end into the cone and fill the entire tree with candy.

How to make a gift tree from candies with your own hands

You will need:

Several candies

Green cardboard

Scissors

Red ribbon

PVA glue.

Text instructions after the video.

1. Cut a strip of green cardboard measuring 25 cm x 5 cm.

2. Divide this strip into three parts, which will then need to be bent - make marks for future folds at 8 cm, 16 cm and 24 cm.

Also divide this strip in half lengthwise.

3. Fold the strip in half lengthwise, apply PVA glue to one half and glue both halves together.

4. Using the marks made in step 2, fold the strip into a triangle. You have now created a frame for your future candy packaging in the shape of a green Christmas tree.

5. We make shelves for candies inside the packaging:

5.1. Prepare a strip of paper measuring 25 cm x 5 cm, and make marks on it every 2.5 cm (i.e. 2.5 cm, 5 cm, 7.5 cm, etc.).

5.2. Cut the strip in half lengthwise.

5.3. Cut one of the halves in half crosswise at the 10 cm mark.

You will have 3 stripes: 10 cm, 15 cm and 25 cm.

5.4. Fold each strip as shown in the image (zigzag) to create several triangles.

6. Insert your shelves inside the frame (Christmas tree): the long strip is folded into shelves for the bottom row, the middle one for the middle row and the small one is folded into a triangle and inserted into the top of the “Christmas tree”.

7. Start inserting candies into the cells of your Christmas tree.

8. Take a ribbon 45 cm long and tie it to the Christmas tree.

If you wish, you can make a trunk for your Christmas tree out of brown cardboard. You can also put sweets in it (see video). It can be glued using double-sided tape.

*You can decorate the Christmas tree as you like.

A simple candy tree (step by step photo)

You will need:

Paper cone

Corrugated paper

Candies

Decorations to taste (ribbon, beads, artificial flowers, Christmas tree decorations).

For the New Year, many of us are wondering how to surprise and please our family and friends on this wonderful holiday.

In order to make a bright, spectacular, and most importantly delicious candy composition, you don’t need to go to expensive courses in floristry and design, because making this beauty is very easy and simple, and you don’t need to have a lot of free time and spend a fabulous amount of money funds.

Christmas tree made of candies

DIY candy tree

One of the options for making a Christmas tree from candies could be to use an ordinary bottle as the base. To make a sweet Christmas tree, you can use an empty bottle, or you can use a bottle of delicious champagne or wine.

So, using the most ordinary thin stationery tape, glue the candies in layers to the bottle. The thicker you glue it, the richer and more magnificent the New Year’s sweet beauty Christmas tree will turn out.

Christmas tree made of candies

DIY candy tree

Another option for making a Christmas tree from candies is to use a cardboard cone as a base. Use a sheet of thick cardboard, from which you roll it into a neat cone (see photo).

Now glue the candies layer by layer to the cardboard cone. You can use hot glue or double-sided tape.

Decorate the finished Christmas tree with New Year's beads.

Christmas tree made of candies for decorating desserts and cakes

DIY candy tree

Every housewife will definitely prepare a delicious dessert for the New Year's table. And dessert, as everyone knows, should be not only tasty, but also beautiful. That is why we want to offer you the option of decorating a New Year's cake with small chocolate trees, which can be made from several chocolates and icing sugar.

Christmas tree made of candies

This option is suitable for those who want to give delicious sweets as a gift.

From a sheet of thick green paper, cut out strips that you fold as shown in the photo. Place sweets in beautiful wrappers into the finished triangle. Secure the composition with a decorative ribbon or bow.

Christmas tree made of candies

DIY candy tree

A wonderful and unusual way to serve sweets to the holiday table.

Make a kind of three-tier stand from several round cardboard boxes. The dividers will be cardboard triangular partitions that look like Christmas tree branches.