Simple crafts made from cardboard. Cardboard crafts - optimal ideas, simple decorations and toys (115 photos)

What kind of transformations does cardboard not undergo?! IN Lately More and more photos of cardboard crafts are appearing on the Internet.

But if earlier cardboard experiments could be found in kindergartens and art classes in primary school, then today the audience of fans of this activity is expanding in completely different age categories.

Moreover, paper and cardboard crafts made by amateurs can serve not only as entertainment for children or a modest present, but also as a presentable panel for the interior, design gift packaging, exclusive box and even sculptures, not toy furniture or at home.

Preparation of material

How to prepare cardboard for your favorite business? On your own or by purchasing from expensive office supply departments? In fact, cardboard is found in our everyday life much more often than we think, so it is not necessary to buy it specifically. Here are several sources through which you can accumulate the required amount of raw materials:

• - various packaging: boxes, cylinders, bags;
• - internal roll liners toilet paper, culinary parchment, cling film, etc.;
• - details of packaging for tights.

As can be seen from the above, DIY cardboard crafts, in fact, can be made from garbage, and what kind of ones at that?! If you need colored material or more exclusive raw materials, you can always purchase it, if not in a stationery store, then in the scrapbooking department.

Regarding the tools, you don’t need anything special except scissors, as well as a breadboard knife, glue, paint and a few auxiliary attributes at the discretion of the amateur craftsman.

There are several of them, but the most elegant, rightfully, are postcards. In second place are products using the appliqué technique. On the third - cardboard crafts for children: castles, housing and furniture for dolls. Let's look at each of the ideas mentioned in more detail:

Postcard

One of the varieties of crafts made from colored cardboard. When working with such a product, you cannot do without a printer (for copying a diagram, enlarging it to required size and printouts). Next step is transferring the design onto cardboard, as well as cutting it out using a breadboard knife.

The final touch is gluing the blank onto a cardboard base of a different shade and slightly bigger size. The base usually has a rectangular shape. It is divided into two halves. The bend point is drawn with a thin crochet hook, the tip of scissors, or the empty shaft of any pen.

An important condition is that the fold must be drawn under the ruler. After this, the fold is carefully ironed from the outside. The front side is decorated with any decorations: beads, paper appliques, rhinestones, bows, etc.

Such a product has a 3D effect, since it has a volumetric part, so it is not surprising that it can serve not only a nice addition as a gift, but also as a magnificent stand-alone present, in which not only money is invested, but also the soul of the performer.

Applications

This technology allows you to create things that combine simplicity and childlike spontaneity. Such decorations can decorate not only the interior of a nursery, but also rooms that are more demanding, from the point of view of high taste.

For example, you can make a “Seasons” panel, consisting of 4 parts. The ideal cut for it would be a plywood frame cut from a 4-mm plate.

The surface of the frame is sanded with sandpaper and coated with colorless varnish. In the absence of plywood, the frame is made of thick cardboard, divided into 2 parts: the bottom (a square with a colored cardboard applique) and the top (the frame itself, slightly smaller than the base). Bottom part should protrude 2 mm from the frame. The frame itself is also decorated with appliqué.

Kids toys

The most suitable raw materials for this category are rolls on which toilet paper is wound, as well as various cardboard boxes.

So, medieval castle, made in this way, will become a favorite toy attribute for both boys with their knights and girls and their princesses. To do this, it is enough to attach toilet cylinders-liners to a cardboard base, supplementing them with cone-shaped roofs, again cut from the same cardboard.

Individual turrets can be left without roofs, having their tops decorated with battlements. The towers are joined using slots in the cylinders themselves. The textured surface of the towers is made from transformed toilet paper, treated with PVA glue and painted acrylic paints.

Cat's house

A separate masterpiece that will also delight a pet, can become a house made of corrugated cardboard packaging, for example, from a TV.

The technology for making cardboard crafts is as follows: using a compass or a bowl, circles are marked on corrugated cardboard, which are then carefully cut out; From round parts, using the principle of puff pastry, a house of almost any shape is glued together (from conical to cup-shaped, tapering upward).

If corrugated cardboard is not enough, then you can simply take a cardboard box, cut out windows and a door in it, not forgetting about the decor of the exterior and interior. In any case, if the idea is already ripe, but it’s still hard to imagine how to make a craft from cardboard, the Internet can help!

Photos of cardboard crafts

In every home there are many things that seem to be no longer needed, but it’s a shame to throw them away; one of these things includes cardboard boxes. Boxes household appliances, electronics, shoes, dishes, and who knows what else. I present to you a selection of ideas and master classes for crafts that will benefit your home.

1. Convenient storage box for linen, seasonal items, old photographs, postcards, New Year's toys. It would be better to also make a lid for such a box. Use wide tape to glue parts together, and PVA glue to glue fabric.

2. Box-chest for storing jewelry. For gluing we use PVA glue. To give the desired color we use paints and varnish. You can also decorate the chest using decoupage. To do this, dilute the PVA glue a little with water, apply it evenly to the surface to be decorated, take a three-layer napkin, separate one layer with the image and carefully place it on the prepared area. When the surface of the chest dries, coat the top with varnish or PVA glue (the glue will dry and become transparent).

3. And this is a toy for a cat - "The Elusive Ball"

Like this tight box with a lot of holes,

where the ball rolls freely. The cat's task is to catch it.

4. But a strong shoe box can be a good storage for accessories, beads and other small handicraft items. We prepare small boxes, cover them with napkins (you can also use matchboxes) - ready. Now everything will be in its place.

4. Speaking of matchboxes, they can make a very cute chest of drawers, in which you can store chains, rings, and any other small things. Making such a chest of drawers is not difficult, but the most interesting thing is decorating it ( colored paper, glue, beads and buttons).

5. Make your children happy. Can you imagine how fun it will be to make toys from matchboxes- cars, trains, locks, doll furniture. And for the little ones, make a visual alphabet; in each box there will be a miniature object corresponding to each letter.

6. From the big ones cardboard boxes make it best gift for my daughter - kitchen furniture and household appliances, the little housewife will love it and will also instill good habits and skills.

7. Any child up to middle age school age will be delighted with his own house, even if it’s made of cardboard. And you can think about the layout and design together, this will unite you and allow the child to gain even more trust and sympathy for you.

From a large cardboard box, for example from a refrigerator, you can make children's playhouse. Make a door and windows in it, lay a rug inside the house, decorate the house with cheerful curtains, cover the walls beautiful pictures, stickers or children's drawings.

An interesting idea is to decorate a children's house with LED garland.

8. Juice and kefir boxes regularly end up in the trash, but wait. To make a winter house for birds from such a box - even five minutes will be a lot - just a couple of movements with scissors. Make time for nature on your day off, take the whole family and go to the park to hang out feeders with seeds and grains. This is the best example of caring for our little brothers and frugality that you can show your child.

9. If your family is real juice fans, you can make a shelf for children's toys from empty boxes. On the one hand, everything is in sight and at hand, on the other, everything is in its place.

10. Young children often ask to have pets, but they do not always understand what kind of care they require and what kind of responsibility it is. To begin with, you can make a cat, a dog or an aquarium with fish from cardboard boxes. Let him feed imaginary animals and play with them. Soon, by the behavior of your child, you will understand whether he is really ready for another family member to appear, or whether it was just a momentary infatuation.

Little children love to carry toys around with them on a string. A simple craft for kids made from a cardboard box - a cat or dog made from cardboard. Detailed wizard class on how to make such a craft from waste material read at madebyjoel.com

Remember, by turning seemingly unnecessary things into something useful and applicable, you learn and teach how to take care of things, appreciate what you have, take care of nature, and save family budget. Get creative and have fun with it.

If you have accumulated a large number of boxes small size,

then you can make a whole city out of them. More details on how to do

beautiful houses made of cardboard boxes, read.

From cardboard rolls From toilet paper and boxes you can make a garage for cars or a parking lot.

Slide for cars or balls

11. A crib for a doll can be made from one box by cutting out its sides, or from two boxes by gluing them together. In the second option, you will get a bed for a doll with legs.

12. The imagination of a child who climbs inside can easily turn a large cardboard box into a car, plane or ship. Mom and dad can help the baby organize an interesting and useful game, complementing homemade transport necessary details. Steering wheel, wheels, headlights - all this can be made from available things, the main thing is to use your imagination.

If you make a car or an airplane out of a medium-sized box, and then attach straps to them, you will get a car/airplane costume. By wearing these costumes, children can play pretending to be cars or airplanes. Boys will especially like these games.

You can cut out the side of a large cardboard box and make a playing field out of it. To do this, draw on cardboard with colored felt-tip pens roads, bridges, forests, rivers, houses, in general, anything you want.

See also others.

Cardboard has become a very popular material, and today’s modern paper and cardboard crafts may be completely unexpected. If previously it was mainly children in kindergarten and primary school schools (and their parents, of course), then now all ages are obedient to this activity. Furniture, which is completely non-toy, sculpture and even houses - and all of this is made of cardboard. Gift packaging and a variety of boxes, toys and doll houses, photo frames and wall panels made from cardboard can decorate the interior, entertain children and serve as a present.

DIY cardboard crafts available to everyone. After all, sometimes there is no need to even buy material. Cardboard packing boxes, cylinders-liners from rolls of toilet paper and towels, cardboard from packages of tights - you can’t list everything. And literally from garbage, if you want, you can create very interesting things. Colored cardboard and paper can be purchased in the stationery departments of stores. Sometimes special grades of paper and accessories may be needed. You can find them in specialized stores and scrapbooking departments. You don't need any special tools other than scissors and a breadboard knife. Glue, paints and various auxiliary materials are at your discretion.

Crafts made from colored cardboard in the form of voluminous postcards are extremely elegant. To make such a card you will need cardboard of several colors and a printer. Copy the drawing diagram, enlarge it to the size you need and print it on a printer. Next, transfer the drawing to cardboard and cut it out with a breadboard knife. All that remains is to stick it on a cardboard base of a different color. It is cut out in such a size that the volumetric part of the postcard, when folded, fits completely inside. Most often, the base is in the shape of a rectangle, unless the design of the postcard provides otherwise. The rectangle needs to be divided into two equal parts. To make the cardboard easier to bend, the fold line can be made with a pen with an empty core or a thin crochet hook. Next, place a ruler at the bend, this will greatly facilitate the whole process. The denser the cardboard, the more carefully you need to iron the fold line from the outside. Front side cards can be decorated using the most various means: paper applique, beads, rhinestones, bows, etc. You can choose a wide variety of drawings on the Internet for any holiday. A deer, a Christmas tree or a snowflake, a snowman - are quite suitable for the New Year or Christmas. It is better to make the bulk part of the proposed postcards from thick paper or thin cardboard. Volumetric postcard It can nicely complement a gift or even serve as a simple gift itself.

The most varied can be crafts made from cardboard, colored paper made using appliqué technique. Such cute little things can decorate the walls of a nursery, they can be hung over a baby’s crib, and older children will be delighted with such an elegant toy. A four-piece “Seasons” panel can be made with a plywood frame if you have a craftsman in the family who can handle it. The frame is cut using a jigsaw from 3-4mm plywood; the edges and surface of the frame will need to be sanded using sandpaper and, if desired, can be coated with a layer of colorless varnish. But it’s quite suitable for making it thick cardboard. The frame in this case is made of two parts. The lower part is cut out in the form of a square, onto which an applique made of colored cardboard is glued. The upper part is made in the form of the frame itself, its size is slightly smaller than the size of the square, so that the lower one peeks out from under the upper one by 1-2 mm. The upper part of the frame is also decorated with applique. A simple and uncomplicated technique allows you to create a very nice little thing, and all that is required is just care and selection quality material. Which beautiful flowers can be made from paper, you can find out in our.

Cardboard crafts for children and made together with children from cardboard boxes and toilet paper rolls or paper towels extraordinarily varied. Look what a wonderful castle it turned out from those same cardboard cylinders and toilet paper. Insert cylinders are attached to a cardboard base, which are then supplemented with roofs in the form of cones cut out of cardboard. Some turrets simply have the top cut into teeth. The towers can be connected to the fortress wall, also cut out of cardboard, using slits made in the cylinders with a breadboard knife. You can create a textured surface of the towers using toilet paper moistened with PVA glue. Doors and windows are also cut out with a breadboard knife. The assembled structure is allowed to dry thoroughly and painted with acrylic paints. The boys will be happy to place knights in such a fortress and role-play battles. And your little princess will be very happy to have a home for her dolls.

It's not that difficult to make from just a few boxes. Connect the boxes together using a stapler, construction tape or glue. Windows and doors are cut out with a breadboard knife and decorated. The decor doesn't have to be elaborate. IN in this case the tiles are simply drawn on with a white marker. You can make most of the furniture out of cardboard, and in some places you can use ready-made suitable boxes, painting them accordingly. Cover the walls with leftover wallpaper or printed paper and furnish your home using a creative approach. And then a table made from a champagne cork, a chair made from a metal part of the same cork, a tea strainer and other little things will find their place there. Cylindrical cardboard inserts can be used as material for boxes and toys. A little imagination, scissors, glue, paint or colored paper - and a man-made miracle is ready. Moreover, the insert can be used both as an internal and external part of the box. It is made in two layers so that the lid can be put on. The inside of such a box can be covered with colored paper or fabric, and the outside can be finished in a variety of ways. The shaped parts of the boxes can be made from papier-mâché. If you paint such a box, then it is worth covering it with varnish so that it lasts longer and retains its beautiful appearance. appearance. Moreover, the kids will be happy to take part in the creation of all this.

How to make a craft house for a cat out of cardboard.

Everyone knows how much cats love to hide in drawers, boxes or basins. Why not make a cozy house for our little brothers, which will serve them as an excellent sleeping place, and sometimes for games. To make it, we need corrugated cardboard, and you can use packaging from a TV, refrigerator or other household appliances. Next, mark the circles on the cardboard using a compass (or a suitable bowl). It is very easy to make a compass from a nail or a sewing pin, thread and a pencil. A house like the one in the picture is made of several groups of circles different sizes and glued with PVA glue. The hole cutting diagram is shown in the figure. The house does not have to have a conical shape. The layered design allows you to create different shape, for example, initially expanding like a bowl, and then tapering upward. It is not necessary for the hole to reach the very bottom. If you do not have the required amount of corrugated cardboard, it is quite possible to build something like a toy house from a suitable box, cut out windows and a door, and decorate it with any outside decor you wish.

Crafts from corrugated cardboard can be very diverse. These can be flat sculptures cut from layered corrugated cardboard. To do this, find a picture of an animal with an expressive silhouette and copy it. Transfer the silhouette drawing onto the cardboard. All that remains is to carefully cut it out with a breadboard knife. Transverse parts, which are attached using slots, will give the figure stability. They can imitate grass or ice, like penguins. A slot is made up to half the height of the stand in both parts to be fastened. The figurine can be painted, but even without painting it looks quite expressive. The airplane shown in the picture has only parts made of corrugated cardboard, and the main part of the body is a cylinder from a roll of toilet paper. Or you can make figures from colored corrugated cardboard using the quilling technique. Material in the form of sheets of colored corrugated cardboard or ready-made strips in sets of the different colors available for sale. The process of creating figures is very exciting for both adults and children, somewhat reminiscent of the technique.

New Year's crafts made from cardboard can be performed in the most various techniques. These are, of course, snowflakes, flat and three-dimensional, Christmas trees, Christmas decorations and garlands. This also includes various gift boxes and other packaging for New Year's gifts. Cutting snowflakes is the most affordable way manufacturing New Year's crafts. You can use ready-made templates, which you will find a lot on the Internet, but you can give free rein to your imagination. With ready-made snowflakes you can decorate a Christmas tree, the interior, glue them into garlands or use them as an applique to decorate the packaging of New Year's gifts.

Snowflakes don’t have to be flat; you can make them three-dimensional. Snowflakes made using the quilling technique are incredibly beautiful. It is not at all necessary to buy a Christmas tree, live or artificial. It is very easy to make a Christmas tree from cardboard and paper. Let's make a cone out of cardboard of any height and cut it into strips green paper. It is better if the paper is of several shades. Paper strips fasten it in the form of loops. This can be done using glue, double-sided tape or a stapler.

And then we will make a fringe of loops in several rows on our cone. The bottom of the top row should cover the attachment point bottom row. You can also attach fringe different ways using glue or tape. We will sharpen the upper part of the top row of loops. You can decorate the Christmas tree with a homemade topper, toys and garlands. You can also cut out a Christmas tree using a template made of paper or thin cardboard. How more details you cut it, the more magnificent it will turn out, but a minimum of three is enough.

In the picture, the Christmas tree is decorated with cut out toys. But making them yourself will be very difficult, especially if the tree is small. It doesn’t matter, you can cut out the toys separately from colored paper and simply stick them on the Christmas tree. Glue and glitter will allow you to imitate snow on the branches. You can make it out of paper interesting toys for decorating a real Christmas tree. The technique for performing them is not at all complicated and is quite clear from the figures given. Children will be able to be proud of their own made balloons, garlands and lanterns. You can make a model of a small snow-covered house from cardboard and place it under the Christmas tree. If you insert an LED candle or a battery-powered flashlight inside, it will look even more impressive.

Craft school made of cardboard

At school, paper and cardboard are often used in labor lessons. Cardboard crafts grade 4 can be very diverse, because at this age children are already very skillful. And the technology used is very different. For making during the lesson, you can choose toys, boxes, postcards. Detailed master class with paper crafts for kids you will find.

Cardboard crafts, diagrams the manufacture of which is given in our material is completely simple. Simply copy the drawing and then enlarge it to the size you need. Even if you don’t have a printer, it’s easy to transfer it to paper by simply placing a sheet of paper on the monitor. For simple details, such as balls or flowers, you can make a template yourself.

Cardboard furniture - great alternative, if you can’t afford ordinary furniture! Tables, chairs and sofas can be made from cardboard with your own hands!

Such an ordinary thing as cardboard, which we often throw away without thinking with the rest of the garbage, can turn out to be an excellent material for building good furniture. Of course, you can assume that such interior items will be fragile and will easily bend under the weight of objects placed on it, but this can and should be avoided by properly processing the cardboard.

Such furniture has a lot of positive advantages:

• Stylish design. You can design any thing for your home, based only on your taste or the preferences of your family;
• Economy. Spend very little money to buy necessary tools, and you won’t have to spend money on delivery/installation;
• Mobility. With lightweight, immediately foldable furniture, moving will not be your nightmare - you will only have the joy of packing things for your new life;
• Ergonomics. There is no need to walk around an endless store in search of “that very thing” that will simultaneously appeal to you, fit into the interior and be comfortable - from now on you can combine these three qualities;
• Safety. There are absolutely no harmful or dangerous elements in cardboard furniture - after all, you make furniture from boxes with your own hands, which means you check and see all the components;
• Environmental friendliness. Furniture lost old look and attractiveness or you decide to change the design - just take it apart and put it in a bag. You can throw it away without worrying, or you can use it to light a fire for barbecue - cardboard will not harm the environment in any way!
• Strength. At correct processing cardboard, furniture made from it will last a very long time.

Despite the large number of advantages, cardboard furniture has one extremely unpleasant feature - when it is in a humid environment, the furniture deteriorates and becomes unsuitable for use.

Take this fact into account and always remove cardboard furniture from the street, otherwise sudden rain may render it unusable.

Tools and materials for manufacturing

What is needed to make cardboard furniture with your own hands? The constant materials will be:

• Packaging cardboard/cardboard boxes – you can ask for boxes in the store or look for purchased equipment at home;
• Regular and colored tape, paper tape, double-sided tape;
• A stationery knife for cutting cardboard (watch the sharpness of the blades and change them as they become dull);
• Sharp scissors;
• Dull knife;
• Roulette/iron ruler;
• Pencil and eraser;
• Glue (PVA, hot melt glue, wallpaper glue, liquid “moment” - depending on the situation, but sometimes you can only get by with tape);
• Sandpaper (you will use it to sand the cardboard sections);
• Kraft paper (white and dark) and tracing paper.

Types of cardboard

To make cardboard furniture with your own hands you will need different cardboard, depending on the situation.

Cardboard can be one-, two-, or three-layer, depending on the number of layers, which, in turn, consist of small waves that can be seen on the cut of the cardboard. The more layers of cardboard with waves, the thicker the cardboard. Also, do not forget to determine the sides of the cardboard before starting work:

• smooth (sometimes with drawings) side - front,
• rough - purl.

To strengthen the edges of cardboard furniture, use dark-colored kraft paper, gluing all the seams with it, using wallpaper glue. White paper(or tracing paper) stick on all the furniture - it makes decorating the furniture easier.

Remember: craft paper and tracing paper must be torn by hand before gluing, not cut!

How to make cardboard furniture more durable

Depending on the purpose of the item (whether it be a chest for children's toys or a TV stand), cardboard is strengthened in different ways. For a more reliable and durable fastening, you must remember the following:

• To strengthen the cardboard and protect it from moisture, use parquet varnish, applying it to already finished and decorated parts of furniture;
• Try to make furniture symmetrical - it is more stable than irregularly shaped furniture;
• If you make asymmetrical furniture, then add more supports to it for strength;
• The more cross sections your furniture has, the more stable it is;
• To give more strength to your structure, use a trick - make two layers of cardboard on all furniture elements. But, pay attention, the layers must be different: one layer must have horizontal waves, the other must have vertical ones;
• Light cardboard is less durable than dark cardboard;
• The thicker the cardboard, the stronger it is.

How to use cardboard furniture

How to properly use hand-made cardboard furniture

In order for your cardboard new thing to serve faithfully for a long time, do not forget that:

• Cardboard furniture is afraid of moisture (varnish will not save you from rain);
• Use it for its intended purpose: if you have made a table for letters/keys/changes, do not place a bulky flower pot on it;
• Make sure that there is no open fire near cardboard furniture (be it a fireplace, a fire, or even a cigarette) - you may lose not only a piece of furniture if you allow a fire hazard.

How to make furniture from cardboard with your own hands if only a box comes to mind? ? We are in a hurry to surprise you - you can make a lot of amazing things from cardboard that harmoniously fit into the interior, from the nursery to the hallway, and if you are completely overwhelmed by inspiration, then there are many ideas for the office and country house.

Below you will see how to make cardboard furniture with your own hands using patterns and diagrams. For the first time, choose something that is not too complicated to get comfortable with the manufacturing technique.

Important! When designing furniture, remember that 0.6 cm will take up furniture decoration, and always add these centimeters when measuring dimensions.

Master class No. 1: Cardboard shoe stand

We decided to simplify your task - we put the first master class that anyone can assemble. So, armed with everything necessary items, let's begin.

Step 1

1. Take sheets of cardboard - approximately 21x24cm - and divide them into three equal strips; Using a dull knife, press the strips thoroughly so that they bend.
2. Cover the long sides of the sheet with any colored tape.
3. Then fold the sheets into triangular oblong shapes and secure with the same tape.

Step 2

You can make any number of triangles. To secure the shelves, take whole sheets of cardboard and glue triangles to them double-sided tape or PVA. You can put a sheet of cardboard on the very top and put high boots on it.

Master class No. 2: Cardboard bookshelf

Step 1

Take long, not wide sheets of cardboard - some of the sheets will be used for vertical bases, so they should be a little longer; in general, the size of the sheets can be any size at your discretion. You can look for such sheets in hardware stores - sometimes they throw them away with just such cuts.

If you can’t find it, take solid (without bends!) sheets and measure for the cutting line so that on all sheets they coincide when threaded into each other.

Step 2

If you take thick cardboard sheets, then when you connect them together they will hold tightly and without additional funds. Thin sheets can be secured together with hot glue; it will dry quickly, so you will have to act quickly when joining the sheets. After joining the sheets, you can already use the shelf.

Master class No. 3: Hanging shoe rack

1. Take a couple of large sheets of cardboard and mark them into equal rectangles based on the size of your shoes. Then cut them out.
2. Fold each rectangle as shown in the photo, and secure the resulting pockets with tape.
3. Insert the pockets into each other so that it is easy to secure them with double-sided tape, but still leaves room for shoes.
4. You can fix the shelf on the door - it will not interfere with you at all and take up a lot of space.

Master class No. 4: DIY laptop stand

Almost all of us have an indispensable tool for work and communication - a laptop. And we have to buy all sorts of peripheral devices for it (mouse, flash drives, removable hard drives, etc.). And so, when there is a desire to put it on a stand for ease of use, we are forced to go to the store and spend extra money. For those who want to avoid unnecessary expenses, but do not want to give up the stand, there is an excellent solution - to make it yourself. And how to do this - you will read in this article.

Materials and tools:

• Laptop to measure stand size;
• yardstick;
• several sheets of paper or newspaper for a stencil;
• thick cardboard for the stand itself (you can use an unnecessary box);
• long ruler;
• marker or pencil;
• large scissors or a utility knife.

You already understand that we don’t need any special materials - everything listed is probably available in any home. Let's start production.

Step 1.

Take paper or newspaper and spread it on a flat surface. All actions related to measuring the size of the stand and making a stencil are best done according to the principle “measure seven times, cut once”, because in best case scenario the stand will be crooked, and at worst, it won’t hold the laptop.

1. First we will make a leg (this is a crossbar between the legs to give the stand more rigidity). We take a tape measure and measure the length of the laptop along the keyboard, from corner to corner.
2. Mark exactly half of this length with a marker on paper.
3. We draw a line - this will be half of the base of the pole. It's better not to draw this detail entirely. Make a slight inaccuracy and the laptop will stand crooked.

• We measure up from the edges of the segment 4 cm and 7 cm. Draw a rectangle.
• Mentally divide the rectangle into 3 parts: the first third is an almost straight line at a height of 4 cm, the second third is with a pattern or hand making a bend at an angle of 45 degrees to the 7 cm line, the last third is from the right end of the segment we draw a line to the 7 cm line at an angle 45 degrees.
• All this is simply and clearly shown in the photo (detail 1). At the point where the two curved lines meet, a narrow sleeve is made - at this place there will be a cutout for aligning the parts.

Step 2.

The same photo shows a template for the legs of the stand (detail 2).

You select the angle of the stand based on your personal preferences. This will add up to the height of the right and left sides of the leg. When drawing a template for the leg, pay attention to the tooth, which will subsequently keep the laptop from falling.

In height, it should be at least a third of the thickness of the laptop. The slot in the leg for coupling with the leg should not be in the middle, but at a distance of approximately 1/3 from the far edge. This also affects the stability of the structure. Curves are at your discretion.

The slots in the legs and leg can be no more than 3-4 cm in height. They can be 3-5 mm in width depending on the thickness of the cardboard, but in both parts they can be the same.

Step 3.

Cut out paper templates. We attach the template of 1 part with the bottom cut to smooth edge box chosen as a future stand. It is desirable that the stable parts of the stand are perfectly level (the stand will not wobble on the table).

• Carefully trace the template on one side, then flip it over to the other side and continue tracing. We get one continuous symmetrical part (leg). Apply parts only to smooth parts of the box (pieces of cardboard) where there are no folds.
• Place on another piece of cardboard (for example, the bottom of a box) paper template details 2, i.e. leg. We circle and repeat the same a second time. The legs must be absolutely identical.

Step 4.

Cut out all the parts with scissors or stationery knife. We move them along the slots, as shown in the photo.

If everything is combined correctly, then you can be glad that a simple (like all ingenious), functional, strong stand for your digital friend is ready! Install a laptop on it and attach additional keyboards to it, watch movies at a comfortable height, sweep cookie crumbs under the stand - you are now the happy owner of a homemade laptop stand!

Cardboard table diagram

We also offer a simple photo master cardboard desktop class