Determine your jeans size. How to determine and what are the sizes of women's jeans

Faced with the purchase of jeans in the USA via the Internet and without trying on. I looked at the size of the jeans that I wear now, I chose the same ones on the store's website. Arrived a size larger. I realized that the Russian sizes do not match the US sizes.
Through cunning manipulations, I came across the site originalusa.ru, where I read how to size mens jeans. So:

"... how to measure yourself correctly in order to place an order?

First of all, let's deal with the notation. Jeans are usually measured in two directions: In the waist "W" - waist (belt) and in the length of the leg along the inner seam "L" from "lenght" (length). This size is called - "Inseam" (inside seam). Dimensions are, of course, in inches. The designation looks like W32 L34 (for example). That is, the waist is 32 inches, the leg length is 34 inches.

There are two ways to measure yourself: deductive and laboratory. Let's consider both. Moreover, it is better to use both, for self-control.

deductive way:

If you know exactly your “Soviet” pants size, then you need to subtract the number 16 from it, as a result, we get the “W” waist circumference. For example, you are wearing pants size 46: 46 - 16 = 30. your W=30.

The laboratory method is the most accurate:

Take your favorite available jeans or trousers that "fit well". It means that they do not slip when walking, but at the same time they do not press. Trousers with an elastic waistband are not suitable, it is clear why. Fasten the button on the waistband of your pants. Measure the distance between the extreme points of the belt, through the button - exactly as shown in the figure (Fig. 1) and multiply the resulting number by 2. As a result, you got the waist size of "pants-that-fit well." For ordinary trousers, this could have stopped. But we buy jeans. And in order to buy "jeans-that-fit-the-right", subtract 1 inch from the figure obtained by multiplying. These jeans will sit very tight, which will make you pull in your stomach and look slimmer. Over time, as you wear them, jeans tend to stretch slightly and become looser.

For example, you measured the belt in centimeters as shown in the photo, and received 41cm. (1 centimeter = 0.393700787 inches or 1 inch = 2.54 cm). 41cm x 2 \u003d 82 cm. Multiply 82 cm by 0.39, we get 31.98. Rounding this amount, we get - 32. Therefore, if when measuring your old jeans, you got 41 cm, then your W size is 32. However, one very important remark needs to be made here. Jeans in this size will fit you if they are made from untreated fabric. If you choose processed jeans (“boiled”, frayed, artificially aged), then it is better to subtract one from the resulting size. Those. 32 - 1 = 31 - this size will be preferable.

In other words, manufacturers recommend choosing treated jeans an inch smaller than your size. But, note that not all manufacturers have odd sizes - many designate W sizes in two-inch increments - 30, 32, 34, 36. If you prefer jeans to sit loose, do not subtract one. The difference in the big side can always be corrected with a belt or stylish suspenders. The main thing is that you feel comfortable in them. And do not forget that jeans that are too tight on you at the first try on (especially in the waistband) will become a little looser after a couple of days, because denim, despite its density and strength, noticeably stretches.

Determining the second parameter is the size of "Inseam" (length L) - much easier. This number marks the length of the leg (in inches) along the inside seam. Use a metal tape measure or the help of an assistant - and determine, as shown in the figure (Fig. 2), the length of the leg from the groin to the level that seems preferable to you (someone likes the pants to “wrinkle” a little at the bottom, someone prefers shorter ones). In this case, the measurement on a real figure, and not on good old pants, is more accurate. Do not forget that if you take measurements in centimeters, then the result must be multiplied by 0.39. Please note that after washing, jeans shrink in length much more than in volume (i.e., in width). This is especially important to consider if you buy raw denim jeans (Raw, Rigid - it shrinks 10 - 12% of the original length (but the processed fabric shrinks, according to manufacturers, no more than 2%).
If you buy straight-cut jeans from raw fabric, then the error in calculating the length is not terrible - they are easy to shorten and the work of the tailor will not affect the branded look of the jeans. So you can safely buy these jeans with a "reserve" length. But if you buy pants that are narrower at the bottom or, conversely, flared, then try to take into account all the nuances, especially if the jeans are sewn from treated fabric, which already has its own individual “pattern” of scuffs and “creases”.

Sometimes the length of jeans, mostly leather or designer jeans, is indicated in feet and inches. For example: 5 "4 - five feet and 4 inches. Here you need to convert feet and inches to centimeters, and according to the result, choose the size. 1 foot \u003d 30.48 cm, 1 inch \u003d 2.54 cm. In our example: Multiply 5 by 30.48, 4 multiply by 2.54, add up and get a height of 163 cm.

Actually, I used the second, "laboratory" method, and everything worked out. Jeans fit like a glove, nothing had to be cut off or hemmed.

In many countries of the world, men prefer denim clothing. This is due to the fact that practical clothing allows you to emphasize the style of its owner. In addition, today jeans can be chosen by color and style, which is the perfect complement to the image of its owner. Recently, not products called consumer goods, but high-quality clothing from well-known American manufacturers have become increasingly popular. I must say that the United States is the birthplace of denim. That is why they are produced there in compliance with age-old traditions and generally accepted norms. But when ordering such jeans in online stores, the consumer is faced with the problem of correct sizing. Indeed, in this case, the fitting option disappears by itself.

Many buyers of foreign clothing remain at a loss, because its marking is significantly different from that which is available on Russian-made clothing. Not everyone knows what the numbers and letters on the label of western jeans mean. On western jeans, it is customary to indicate two indicators - the inside length of the leg and the waist circumference. For a clear example, the size of American jeans is indicated as follows: W36 L34. At the same time, do not forget that the American system implies the use of inches.

Determination of the "W" size in men's jeans

It is the letter "W" that determines the waist circumference. However, practice shows that in men it is impossible to rely only on the waist line. In some situations, for example, with a large belly, the measurements obtained will be much larger than the actual parameters. For the most accurate measurement, it is recommended to use old jeans that fit perfectly on the figure. Lay the buttoned jeans on a flat surface, measuring the distance between the extreme points of the belt. In this case, the centimeter should be approximately at the level of the button.

The result obtained must be multiplied by two, since we have determined only half the volume. Further, the result must be divided by 2.54, which will allow you to convert the measurements to inches. For more clarity, consider an example. So, the length of one side of the belt was 45 cm. Multiply this number by 2 and get the full waist. Next, we translate 90 cm into inches, dividing them by 2.54. As a result, we get 35. But we must also take into account the fact that old jeans are slightly stretched, which can happen with new ones. Therefore, from the resulting 35, you need to subtract 1. So, with the help of simple calculations, we determined that the size according to the waist “W” is 34.

To significantly save time with these calculations, you can use a special table. Here it is enough to compare the results obtained when taking measurements. If there is no table at hand, but there is a need to translate the Russian size into European, you can consider another example. If you have pants in size 50, you need to subtract 16 from this figure. As a result, it turns out that your jeans size according to European standards is 34. It should be borne in mind that this method is not suitable for determining the length of the leg. After all, the parameter "L" does not mean the height of a person, but only the length of his legs. As you know, people of the same height can have different leg lengths.

Men's Jeans Size Chart

Determine the "L" indicator in men's jeans

This is the length of the trouser leg along the inner seam. It must be measured from groin to foot. The result, of course, must be divided by 2.54. For example, if you have 89 cm from groin to foot, then in inches this figure will be 35. A fairly popular assistant in determining the size of jeans for men is a special table. It will help you choose the right pants. Although in practice you can make sure that the table does not give a 100% guarantee of the correct choice. For example, many online stores offer customers their own size charts. However, they differ significantly from the generally accepted dimensional grid. This is due to the fact that some special patterns are used in the production of jeans. Also, the products of different companies may differ in their cut. Here it is better to trust the tables that are presented on the seller's website.

Denim has been in fashion for decades now. Of course, today there is a wide variety of clothing that varies in cut and design. This range allows you to use jeans on a daily basis. In addition, such things are fashionable to pick up for business meetings and other important events. Denim clothing designed for the fair sex deserves special attention. The practicality and convenience of such things is complemented by a beautiful appearance, which allows women to always look amazing.

How to determine the size of jeans for women?

As a rule, the size of denim trousers designed for women is determined using Latin letters. So, "L" indicates the length of the product along the inside seam. Letter W shows waist circumference. Keep in mind that numbers are in inches. As you know, an inch is equal to 2.54 cm. Thanks to simple calculations, you can accurately determine the size of the jeans selected in the store.

Almost all manufacturers of women's jeans use elastane or lycra in their production. Such additives are necessary so that the product has the ability to stretch a little, while fitting the body. That is why, when taking measurements from your body, it is recommended to round the received numbers down. To determine what size jeans a woman needs, you will need a centimeter tape. When applying it to the body, it is necessary to ensure that the tape fits snugly enough. In order not to be confused, it is recommended to translate the results obtained into inches. To do this, the resulting numbers must be divided by 2.54.
First you need to measure the circumference of the waist, which is indicated by the letter "W". In this case, the centimeter must be wrapped around the narrowest part of the waist. It is also necessary to determine the circumference of the hips (H). To do this, you need to wrap the tape around the most convex part of the hips. It must be said that here we got two numbers. In this case, a larger value must be used to calculate the "W" size.

The “L” indicator, which determines the length of the leg, can also be found using a centimeter tape. To do this, measure the distance from the groin to the foot. In this case, you need to consider what length of leg you want to wear. For example, if you measured a length of 85 cm, then this number must be divided by 2.54. The result is 34 - this is the "L" parameter. I must say that jeans for women have three main sizes - 30, 32 and 34. Of course, you can find other sizes if you wish. But 28 and 36 are extremely rare. Some manufacturers on labels may not indicate numbers, but letters indicating the size of the product. So, S - 30 size, M - 32 size, L - 34 size.

Removing measurements should not cause any difficulties. For greater convenience, the results obtained can be compared with the table. Thanks to this, you will be able to accurately determine the size of jeans you need as quickly as possible.

Products of this type belong to the belt, along with trousers, shorts and skirts. However, the sizes of jeans in the tables for women (and men) are calculated and indicated differently. In addition, Russian or American markings can be used. That is why we sometimes have to resort to the help of a consultant in the store.

Women's jeans size: table with Russian and American markings

As we mentioned above, Russian and American systems are used for labeling jeans. The first is found only on products of a domestic manufacturer, and the second - on all others, including Asia. The dimensional grid for women's jeans looks like this:

Rostov

This is an additional clarification on what height the model is designed for. It is used, depending on the manufacturer, in two versions. The first - inscriptions of the form:

• "Low growth" - up to 165 cm, inseam about 75 cm.
• "Medium height" - from 165 to 172 cm, inseam about 81 cm.
• "High growth" - from 172 cm, inseam about 88 cm.

Take a look at .

The second option is an inch marking of the “L” type. "L" in this case is the length of the inseam in inches. Height is indicated for convenience - the buyer always remembers it, in contrast to the desired leg length. This is how the sizes of women's jeans look like, table:

How to determine the size of women's jeans table

Before referring to the jeans size chart for women, you need to take all the necessary measurements. We will need:

• Waist.
• Hip girth.
• The length of the step (internal) seam.

Look at the article, we will tell you what it consists of in the modern world.

And standard notes: at the waist and hips, do not tighten the centimeter tape too tightly; we take the length of the crotch seam from the groin to the ankle or below - to the place where the leg should end. Or maybe you are interested to know, you? Then follow the link.

Defining values ​​for RU and W

Now about how to choose women's jeans in size. Two values ​​\u200b\u200bare needed here - the girth of the hips and the waist. Further, if we are talking about the Russian notation system, we simply select the line that is most suitable in terms of parameters. For the American system, in addition to the standard reconciliation with the table, a calculation system is available - in case there is nowhere to see the correspondence.

W is an abbreviation for the English "waist" - waist. The number on the label next to the "W" is the waist measurement in inches. Therefore, to find the correct numbers, you need to convert your waist measurement from centimeters to inches. To do this, divide the girth in centimeters by 2.54. The result obtained is the desired value of "W". How to find out the size of women's jeans, a table of parameters matching:

Please note: if you are going to buy jeans made of inelastic denim, we round the border numbers up in the calculation. For stretch, well-stretched products, round down.

Determination of the correct size (L)

The first way, as in the previous case, is to use the size table for women's jeans, given in the first part of the article, and choose the option that suits your parameters best. And if it is not possible to check the ready-made values, you can perform the calculations yourself. And here again we are talking about inches: "L" is the length of the inseam in inches.

Respectively:

• We measure the length of the inner seam, write it down in centimeters.
• We divide the result by 2.54.

If it's a fractional number, round it up.

Jeans are the most popular casual men's clothing in all countries of the world. They differ in color, design, style and the degree of processing of the material from which they are sewn. Today, many men prefer to purchase high-quality jeans from American manufacturers in online stores. This is not surprising, because America is the homeland men's jeans, and it is there that they are sewn, strictly observing generally accepted dimensional standards and patterns. But when buying goods online, they cannot be tried on, which means that there is a risk of ending up with a larger or smaller item.

How to determine the size of men's jeans?

The labeling of branded jeans is different from that used on domestically produced trousers, and not everyone knows what it means. As a rule, two English letters can be found on their label: W (waist) or waist circumference and L (length) or leg length along the inside seam. It looks like this - W36 L34 and is an example of the American numbering system in which all measurements are made and indicated in inches. Let's figure out how to correctly determine mens jeans size.

How to find the W size?

The basis for determining the W size is the waist circumference, but for men it cannot be measured by taking measurements with a centimeter tape directly from the waistline - the result can be a number that will be much larger than the actual parameters. For the most accurate measurement, you need to take old jeans that fit perfectly on the figure, wash them so that they “shrink”, then lay them in front of you and fasten the button. Jeans size W is the distance between the extreme points of the belt, which is determined by its bottom seam, attaching the tape to the jeans at the level of the button.

The measurement result is multiplied by 2 and divided by 2.54 (inch). If the length of the belt is 45 cm, then 45*2=90 cm and 90÷2.54=35. But given the fact that the jeans on which the measurement was made are no longer new and sufficiently worn and stretched, 1 unit should be subtracted from the last number, that is, 35-1 = 34. This will be the exact male size according to the waist circumference or W.

Sometimes, in order to purchase the most appropriate trousers, it may be necessary to measure the circumference of the hips by stretching a centimeter tape around the body along the most protruding points of the buttocks.

Men's Jeans Size Chart will help save time and, without any additional calculations, compare the results obtained as a result of taking measurements with the values ​​​​accepted abroad.

Men's Jeans Size Chart

The size W can be calculated in another, faster way, which, however, is less accurate. Knowing your Russian trouser size (say, 50th), you need to subtract 16 from it, that is, 50-16 = 34. To determine the parameter L, this technique is not suitable, because it does not mean the height of a person, but the length of his leg, which may differ in two men of the same height.

How to determine the size L?

Size of men's jeans L is the measurement of the distance from the crotch to the edge of the leg along the inseam, the result of which must be divided by 2.54. If the resulting value is 89 cm, then 89÷2.54=35. This is the inseam length, or L.

Jeans Size Chart is an indispensable assistant in choosing a perfectly fitting model, and sometimes without it it is very difficult to understand the designation of the parameters of these products, especially in the absence of contacting consultants for clarification. However, some online stores place their own tables, which may differ significantly from the above, which mainly depends on the characteristics of the patterns and cut of a particular manufacturer. In this case, when ordering, it is better to use the data indicated on the official website of the company.

Men's jeans: choose the right one

A very important criterion that ideal jeans must meet is the quality of the material. As a rule, it is 100% cotton, quite dense and rough to the touch. Sometimes a little elastane is added to it, which is quite justified: such pants do not stretch at the knees and retain their original appearance for a long time. Trying on jeans, be sure to pay attention to the seams, pockets, zippers - everything must be neatly sewn and processed.

correct men's jeans should not “hang” on the hips, but they should also fasten with little or no effort. As for the length, a lot depends on the model, but some believe that the product sits as it should if a light accordion forms at the bottom of the leg. Do not buy too long denim pants, even if they fit your waist perfectly, thinking that they can be shortened without compromising the appearance of the product. Firstly, this will lead to a change in its proportions, including the knee height intended by the manufacturer. Secondly, after washing, jeans can shrink and be even shorter than you expected. And thirdly, if you come across an incompetent tailor, and the seam is uneven, the pants may begin to curl.

For men with long legs, straight and slightly tapered jeans with a medium or low fit are suitable, while for owners of short legs, a high fit is recommended, and the cut is straight and loose.

Jeans as a crime: how it was in the USSR

Today, when jeans are a universal choice for absolutely all categories of men, when store shelves are full of them, and the price and model range ranges from Chinese consumer goods to elite brands, it is hard to imagine that they were planted in the USSR.

A symbol of "coolness", a sign of bohemianism, a hint of dissent - indigo linen pants meant much more to a Soviet person than just a piece of clothing. Their boom, which began in 1957 with the Moscow Youth Festival, swept the country with a true "denim fever".

The first to bring denim to the Union were diplomats, sailors, and pilots. Then this "business" was put on stream by foreign tourists, selling scarce goods to resellers (they were called fartsovshchiks). Some vendors are said to have managed to smuggle in a few pairs by hiding them under baggy trousers.

In addition, fake Levis, Lee and Wrangler were made in underground workshops in the USSR itself and sold with crazy success for a price equal to a month's salary of an engineer.

The Criminal Code tried everyone involved in such trade under the articles "currency transactions" and "speculation", punishing them with terms of various lengths. And the notorious Yana Rokotov and Vlad Faibishenko were sentenced to death by the judges (“trade in jeans” was one of the charges). In memory of them, one American company still sews the Rokotov and Feinberg model.