DIY men's leather bracelets. How to make a leather bracelet with your own hands for men and women

25.09.2019

Leather bracelets are universal accessories, which have been in fashion for several seasons and remain popular. Women's baubles can be woven or flat, because the preferences of girls are different. But many agree that products self made interesting and look much more original than those sold in stores.

They are different colors, sizes and shapes, you can use a wide variety of weaving patterns and huge selection methods on how to weave leather products.

Such products can look both elegant and extravagant. It depends on the weaving method. How to learn to weave leather bracelets? First you need to purchase small pieces of leather and cut them into strips. There are many weaving patterns, but it is better to start with the simplest ones.

Bracelet "braid"

This is one of the simplest and elegant solutions leather bracelet.

Weaving products can be done in several directions.

You can weave a slightly unusual braid using another method

Different types of leather behave differently depending on its softness, finish and thickness. Some bracelets will turn out tight, some will be looser, it all depends on the technique and quality of weaving, as well as on the skin and its plasticity.

If you have mastered one version of leather weaving, you can continue to learn how to weave bracelets using various techniques.

Bauble with embroidery

You can add a leather ribbon decorated with appliqués, colored threads or interesting studs to a thin woven bracelet.

It can be a strap about 3-4 cm wide. You can buy special leather for baubles or take old belt, a bag or the top of a soft old shoe.

The leather can be black, it will contrast beautifully with bright embroidery, brown skin also looks beautiful and stylish.

You should also stock up on metal decorations, such as heart-shaped ones, which can be purchased at any craft or scrapbooking store.

You can embroider with thick stitches of bright thread or decorate the product decorative elements. Such a product can be fastened with an ordinary button.

How to weave a leather bauble

You will need:

narrow strips of leather or leatherette of any color;
thick cord or wire;
lighter;
large lock with hook;
scissors;
Super glue.

Girls, summer is coming and wouldn’t it be time to take care of updating your jewelry box? I suggest starting today with a couple DIY leather bracelets– they are made easily and simply. Interested? Then let's gut out mom's old ones leather jackets and daddy's belts. The only request is not to give in to nostalgia for parental education and cut your father's straps into thin strips. Go.

Option one.

This is a bracelet bracelet. Delicate, beautiful, thin. He’s been asking for a pair for his hand, so I advise you to weave several pieces at once. To make it, you can buy a leather blank, or you can make it yourself: Cut a wide strip of leather along two lines, and put buttons on the ends using an awl.

Now is the time to start weaving. Thread the lower end of the bracelet alternately with three threads and straighten the twisted strips so that the bracelet is flat.

Each of the braided bracelets differs only in the thickness of the braids. Don't worry if you don't succeed in weaving the bracelet the first time. Train and become a pro.

Option two.

This bracelet is made in pastel lavender colors. It is gentle and thin. Perfectly suitable for spring and summer outfits.

We will need:

white, light green and lavender thread (about 40 cm each)
strip of white leather (40 cm)
silver chains about 20 cm
silver plug with clasp
scissors and glue

Step 1: Cut the thread into nine pieces of about 20 cm, two for each color (green, lavender, white and white skin) and a silver chain. Place them in groups of three, as in the photo. Fasten the edges of the ribbons.

Step 2: Start weaving. To achieve an even pattern, make sure that the different colored threads remain in the middle of each strand.

Step 3: When you get to the end, secure before cutting off the ends. Glue the ends of the bracelet and clasp together.

Step 4: If the bracelet is too short, extend it with a chain.

That's it - your bracelet is ready!

Option three.

For this bracelet you will need skill in working with sewing machine, but the result is worth it. In our version it is white and pink DIY leather bracelet, but you can change the colors and choose a different composition.

So, get ready to work:

scissors, knife;
a piece of white leather measuring 3x25 cm;
thick pink fabric;
hooks;
ruler;
sewing machine.

Cut the leather into nine strips 0.33 cm wide. Divide the strips into three parts: three strips each and braid.

Fold the pink fabric as shown in the picture and sew it to the skin. Secure the hooks. That's it, the bracelet is ready - it's time to show it to your girlfriends.

Option four.

This bracelet is radically different from the three previous ones in that it is not woven using braids. Measure your hand and calculate the length of the leather strips (you will need two). In addition to them, stock up on coarse thread and follow the instructions indicated in the figure. Good luck.

Option five.

This cute bracelet contains a lot of elements: a braided braid, stones, and even chains. I recommend preparing thoroughly.

Materials:

knitted fabric
thread, needles, pins
scissors
ruler or tape measure
leather cord
thin metal chain
2 wooden beads
2 fasteners
jewelry pliers

The accessory market offers us a large selection of style elements, but how to make a leather bracelet with your own hands? Both leather and its substitutes occupy a large place in modern choice material. It does not require processing difficulties and effectively complements the image. Leather is used in bracelets for both men and women.

Bracelets Styles

We offer you to consider several examples of bracelets and instructions for their manufacture.

Leather thin strips and waxed leather cords are sold in stores by the meter. Take the required amount and choose colors. Cut the strips into pieces and secure with cords. Collect different types cords into one bracelet. Add metal jewelry or beads.

Take a long cord so that it circles your hand several times and secure special fasteners at the ends.

Note! The caps can be glued using super glue or hot glue from a hot glue gun.

Several blanks metal bracelets braid it with a leather cord like a wicker basket. The scheme of work is very simple, the master class will not take much time.

The simplest type of woven leather bracelets is the “pigtail” method. You can weave different types of laces and strips. Regular brown and black colors suit various clothing styles; more colorful ones are chosen for bright summer looks.

An interesting version of weaving with leather cord and beads has recently become fashionable. For such bracelets, the way of imagination is open in terms of combining the colors of threads and beads.

Delicate cute lacings intertwined with beaded thread are tied with dense bright denim threads.

Take beads from 4-6 mm and intertwine them with threads between two leather cords. To help with this you will need a needle.

Wide model

More complex, but still affordable way create your own individual accessory - manufacturing wide bracelet like a strap or wristband.

Fasteners can be buckles or buttons. Spikes and rivets are glued or attached to a thick piece of leather, and holes are made through which cords can be threaded for decoration.

We find suitable material in the form of pieces from old jacket, bags or boots. The buckle clasps can also be taken from the straps of old bags, the buttons are purchased new.

Thick leather is enough to secure with buttons, press out the design, paint it with paints, paste it with half beads, and embroider it with threads.

Thin leather and suede are glued onto steel or plastic blanks for bracelets. They are sold in hardware stores and can come in various widths and sizes.

Most often, needlewomen use this material for bead embroidery. It is not necessary to make bracelets from whole cloth, small pieces of leather can also serve as material for creating jewelry. Staple geometric figures or cut out leaves using leather glue. A leather flower, attached with a button on a strip, becomes a glamorous detail in your appearance.

Men's options

Common associations of a men's bracelet as rock attributes or an addition to the impressive image of bikers. However, it is still relevant to add fittings, metal inserts with engraving of a name, club or ornament, spikes and rivets to such accessories. But in contrast to the informal movement, leather bracelets entered the style of the urban man. Many stars wear such jewelry, and they look no less masculine.

Some types of bracelets become purely men's work. Made from thick calfskin gentle hand girls find it difficult to cut out any detail. But such bracelets will look very impressive with some folk ornaments, which is very fashionable now. Although the task is simplified if it is possible to glue the embroidery on top of the leather, and the material itself will act as a strong base.

We will need:

About 2 meters of leather cord (2 mm) (the length depends on how many times you want to wrap the bracelet around your wrist. 2 meters of lace will allow you to make about 4 turns of the bracelet),
1.5 meters of leather cord (1 mm),
6 meters of leather cord (1 mm),
About 140 small beads with a hole large enough to thread a narrower (1mm) leather cord through,
beautiful button(optional).

Of course, you can use leather laces of other diameters, the main thing is that they can be threaded into beads.

So let's get started! The bracelet on the right (photo above) does not have a button and will be fastened with a loop at one end and a knot at the other.

First, take a 2 meter long cord and fold it in half.

Now we take a cord 1.5 meters long and tie it in a knot around the loop as shown in picture 1.

Then short end We lean the lace (in the picture on the left) against the center, and with the long end we tightly wrap the base of the bracelet in order to make a beautiful beginning.

It is very important to work carefully as the laces are very thin and can break. You can first practice strength on some other lace.

Now tie a knot as shown in picture 2.

Then we put all the beads on long end lace (the one with a diameter of 1 mm) and tie a knot at the end so that the beads do not move out during work.

As for the short tip (the same cord with a diameter of 1 mm), it can be cut off or inserted into the first bead if the hole size allows.

So, let's move our first bead up.

Now take a 6-meter cord and cut it into 2 identical parts (DO NOT CUT). For example, they can be wound into balls, as shown in picture 1 on the left.

We tie a knot (from a 6-meter cord) directly under the first bead.

Well, now you need to carefully follow the steps shown in pictures 4 to 14

At first there is a chance of doing something wrong, but don’t worry, you need to carefully undo what you’ve done and start again with the second bead. Or maybe everything will work out right away.

It is very important to alternate weaving “above” and on the next bead “under” the thin cord in the middle (which has beads). It is necessary to maintain alternation in order to secure the beads well and beautifully between two thicker cords (2 mm wide).

Well, do you see the alternation?

You can easily get the hang of it because this process looks more complicated than it actually is!

Don’t forget to periodically wrap the bracelet around your wrist to see its length.

Finally, place 1 end of the braided lace in the center (for example, the left one), and wrap the other end around all the other laces. Then we make a knot as at the beginning of the bracelet, shown in picture 4.

Now we take all the ends and tie them in big knot. Pull it tight. Depending on the length you need, you can skip a little space and tie another knot and another, as shown in the last picture.

If you are using a button on the other end of the bracelet, the distance between the two knots will be the button loop.

OK it's all over Now! Your hand-woven leather bracelet is ready!

http://bellezza4u.ru/accessuari/item/61-kojanii_braslet_svoimi_rykami.html

It's time again to stretch our hands a little, exercise our imagination, tap into the creative spark within us and make something with our own hands. And not even something, but trendy leather bracelets. What's great about these bracelets is that you can wear them with anything, especially ethnic clothing. In addition, there are a huge number of different forms, colors and options, so you can always choose a leather bracelet to match your outfit. Well, it’s not even worth describing how good they look on the hand.

So, let's get down to the actual process of creating bracelets.

DIY wide leather bracelets

You will need:
. Leather straps (strips of leather with a clasp at the end)
. Ribbons
. Metal spikes
. Threads
. Super glue

You can simply glue a narrower piece of tape onto the bracelet and add some spikes.
Or you can attach spikes and entangle them with a bright thread (yellow, for example). You will get 2 wonderful bracelets.

A couple more options creative process"How to make leather bracelets"

You will need:

- leather laces - you can use thin leather ribbons
- floss threads
- glue
- scissors
- scotch
- needle

Step 1
Measure your wrist by wrapping the leather cord loosely around your wrist twice, then add an extra 10cm to tie it. Glue one end of the leather cord to the surface so that it does not move and, stepping back about 5 cm from the edge, drop a drop of glue onto the leather cord and attach your first color of floss to it.
Step 2
Continue winding the floss around the leather cord until you have a strip of the width you want, then cut off the rest of the thread, securing the end to the bracelet.
Step 3
Take a different color of thread and do the same procedure with it again. Continue doing steps 2 and 3 until you have done about 5cm of different colors.
Step 4
When you're done wrapping, take the needle and pass it under yours. If you want, you can add a small drop of glue to make sure your floss doesn't come off.

Step 5
Tie the end of the lace that is closest to the wrap around the other end of the lace. Make a simple knot. The knot should be strong, but the leather lace should pass freely back and forth and slide through it.
Advice: Before tying a leather lace, wet it a little and knead it to make it softer and easier to tie. This will also help make a strong knot.
Step 6
Leaving at least 10cm on the other side, repeat steps 1, 2, 3, and 4 again.
Step 7
When you have finished wrapping the other side of your bracelet, re-tie the loose end on the other side.

You will get wonderful multi-colored bracelets.

Well now more complex options:
You will need everything you have on hand: leather laces and strips, beads, chains, glue, threads.

1. Bracelet with beads. Take 2 laces, place beads between them and attach the beads to the laces by passing threads through them and entangling the laces with these threads. In the photo: the first from the wrist.

2. Multi-strand bracelet with beads. Just grab some suede threads, a couple of end clasps, and seed beads that have holes for your threads to fit through. String your beads and beads onto strings, tying the thread after each with a knot. Secure the fasteners at the ends.

3. Braided bracelet with beads. It is too easy way. Just start braiding your hair with suede threads, adding beads here and there, secure the clasps at the ends, and you're done. This woven bracelet can also be made with a chain. Just add a thin chain instead of one of the threads and start braiding.

Don't stop your imagination. You can make your own options and variations. The main thing is that you don’t have to buy such wonderful bracelets in the store.

DIY leather bracelets (video)

LiveInternet.ru

If you often think about what to give to the man you love, what gift to give? with your own hands, then this master class is for you. We will show you how to make your chosen one.

To make a bracelet we will need the following tools and materials:

leather belt;
sewing threads;
silk threads "garus";
soap or pencil;
ruler;
rivets;
lock - cabins;
carabiner loop;
hole puncher;
pliers or hammer;
scissors;
stationery knife;
lighter.

Let's get down to business and make a great one leather bracelet, in our case from a leather unnecessary belt. It's very easy and fun.

We prepare the belt for work, cut off the buckle, we won’t need it. The width of the belt used is 5.5 cm. Stepping back from the edge, measure 1.5 cm and mark it with a straight line.

Then mark the length of the bracelet. To do this, you need to measure the circumference of a man's wrist. The average girth of a man's wrist is from 20 to 24 centimeters.

Let's take a length of 22 cm + 1 (2) cm to go from one end of the bracelet to the other.

Cut the part to length.

We need to cut the leather piece into two parts. For this we need two even bars.

We clamp the leather between the pieces of wood, aligning the edge of the top bar with the intended line, and cut it off with a stationery knife.

On a wide part along the edges we outline round ends. This can be done simply by hand, but it is better to use some kind of stencil.

Armed with scissors, carefully cut out the semicircular edges.

The result is a piece with rounded edges.

We decorate the main part with machine stitching. Stepping back from the edge of the cut by 0.1–0.2 cm, we lay a line along the front side. We thread the machine with Garus threads from the top and regular threads from the bottom. At the end of the stitching, pull the threads to the wrong side. We tie knots and light them with a lighter.

On the smaller part we outline the required width for the fastener at both ends.

We make notches of the required size.

On the narrow part, similarly to the main one, we apply a finishing machine stitch.

Then you need to do a fitting. First we apply the main part to the hand, then the second. Thread the carabiner and loop for basting. We decide on the location of the rivets.

Use a hole punch to make holes in the places where the rivets will be located.

Let's do a second fitting. We outline the places for attaching the thin part to the main one. We make marks with a needle or pencil. Punch holes on the main part with a hole punch.

WITH wrong side insert the riveting leg into the main part.

Let's bring it out into the open.

WITH front side We substitute the head of the rivet.

Hammer or clamp tightly with pliers.

Often we want to sit down and create. So many different products that can be made from skin remnants. Each handmade thing, made with your own hands, carries a small piece of good, positive emotions.