How to cut snowflakes from cardboard. How to make voluminous openwork snowflakes from plain paper

Large ones can be used as decoration. volumetric snowflakes from scrap materials. They are hung from the chandelier, on the curtains. Place it on shelves or use it entirely as a decoration on the Christmas tree. The most available material I consider paper to be made, so we will use it.

Involve the kids, let them develop their neatness and fine motor skills so that the process takes place in an unforgettable mood of expectation of a miracle. Or while you are creating a decorative element, let the child cut out with other family members openwork snowflakes according to the given templates from the previous article.

Do-it-yourself volumetric paper snowflakes

Very popular now volumetric options snowflakes, or they are also called 3D. Of course, you need more paper, but the effect is amazing.
With the help of such a decorative element, you can create an unusual photo zone in the apartment where guests will take pictures.

Such a snowflake can be classified as kindergarten or school. Also hang and decorate an outdoor Christmas tree.

So, the simplest and most popular options for snowflakes.

In the first version, we used the same technology as in this article when we made an autumn leaf.

For a snowflake, take 6 square sheets, you can use multi-colored stickers.

The point is that paper sheet Ok, fold it diagonally and make 3 slits on the fold side.

And the two shortest tips are connected, then the workpiece unfolds wrong side. The ends of the two middle strips are glued together.

Then the workpiece is unfolded again and the process continues until all the ends are glued together.

You will get 6 blanks.

And we glue these blanks with their bases to each other.

The next snowflake is even easier to make. It turns out very fluffy and many children like it.

For this we use a sheet of double-sided colored paper and cut it to make a square.

We fold it diagonally and then three more times, getting triangles.

You should have three sides, as in the photo, and a common fold line.

Now long end wrap it inside and cut off the resulting triangle.

All that remains is to make even, long cuts.

Now carefully unfold the workpiece so that the paper fringe does not tear.

To get the volume, we make two more of the same blanks smaller size and connect them in the center.

Snowflake from newspapers

You can make it from newspapers, or you can from plain paper.

To glue one snowflake we need from five to 7 blanks.

We prepare the strips: long – 9 cm, medium – 8 cm, short – 7 cm.

Now we glue the ends of each strip.

We form the blank.

And we combine them into one product.

Newspaper is thinner than paper, so it's best to double each strip to add thickness.

We use toilet paper rolls

Bushings from toilet paper- a great thing for creativity.

For one snowflake we take one bushing and cut it into pieces of the same size.

And glue them together with hot glue in any order we like. To get a double leaf, you need to fold the ring in half.

If you are going to paint a snowflake, then the sleeve should not dissolve in water; use regular toilet paper.

On the ribs finished product Apply PVA glue and sprinkle glitter on it.

Detailed diagrams on how to make voluminous paper snowflakes

Found more detailed explanation how to make three wonderful snowflakes. By the way, if you use self-sufficient tones like red, black or purple, it will turn out quite stylish and unusual.

Blue snowflake

We need to cut strips of two colors: 5 long, 10 medium and 10 short.

Connect like this: Glue the ends together long strip, then glue the middle strips to its ends on the sides.

Then there is a turn of short strips, you get a blank.

Use a stapler or hot glue to connect the pieces in the middle.

How do you like the result?

Curly snowflake

You need five square sheets of paper of the same size.

We fold each square halfway and make slits of the same size to the center.

We unfold it and start making a ray. Glue each end of the strip to its beginning at the center, you get something like a droplet.

Let's collect all the pieces into one whole and rejoice at the result.

Black snowflake

A very impressive, but quite complex applique. There are two options for gluing it.

We take the strips of the same width and very even. We fold three strips perpendicular to each other and secure the center with paper clips.
Let's connect the two outer strips to form a petal, and do the same with the rest.

You can do this. But there is another gluing option.
Then we glue the side strips of one side together under the middle strip.

But then, in order to get more rays, you will need to make a second layer on top, but place it diagonally.

To decorate snowflakes, you can use braid, ribbons, beads, LEDs and other elegant elements.

The paper snowflake has remained the most popular and most affordable for many years. New Year's decoration. They are cut out in kindergarten, and at school. Shops, offices and apartments are decorated with snowflakes. In order to make this patterned miracle, you need a little: paper, scissors and patience. For real beautiful snowflakes You can’t create it on a whim. But there is no need to be afraid. We will tell and show how to easily and quickly make amazingly beautiful, openwork and unusual snowflakes.

Making a paper blank

First, we fold the paper from which we will cut out snowflakes. The diagram in the photo will tell you how to do this correctly.

When we have made paper blanks for making snowflakes, the most interesting part comes - applying the design. You can come up with your own drawing, or you can download diagrams from the Internet. We also publish a number of patterns that will help you make a truly beautiful snowflake. The most important thing is to make sure that the lines do not reach opposite sides of the workpiece, otherwise the snowflake will not work.

When you have applied the design, cut off the excess with sharp scissors. We remove small parts with nail scissors or a stationery knife.

Snowflake with a plot

IN Lately Unusual snowflakes with figures of animals and people are gaining popularity. Snowflakes where you can see the real plot. Take these pictures as an example and come up with your own.

What kind of paper should you cut snowflakes from?

Any kind, as long as it is easy to cut. You can decorate your home with snowflakes made of gold or silver paper. You can use colored or translucent paper. And some people prefer to create using old newspapers and magazines.

Ballerinas on the window

By the way, ballerina snowflakes have not lost their relevance for many years. From such figures you can assemble a real garland. In this case, you will have to cut out the silhouette of a dancer (preferably from cardboard) and a snowflake, which will be put on the figurine as a skirt.

\

Volumetric snowflakes

Volumetric snowflakes look unusual and very elegant. They are also quite easy and quick to make. A good example is in this video.

Today we will talk about how to easily and simply cut out beautiful snowflakes from paper yourself. Making a snowflake using the examples of the diagrams and templates given here will not be difficult even for a beginner!

So, let's look at how to properly make a New Year's snowflake from paper with your own hands.

What we need to do first is to select suitable color and paper thickness. It will be much easier to cut out snowflakes from thin paper: This paper can be easily folded and cut without much effort.

Of course, you can try to make a snowflake from thick paper, but then it’s better to use scissors instead sharp knife or, for example, a scalpel to prevent the edges of the paper from moving when cutting.

But cut it anyway New Year's snowflakes scissors, in my opinion, will be more familiar and convenient. To cut out the contours of a snowflake, ordinary hairdressing scissors are suitable, and small parts It is best to cut using miniature nail scissors.

It should be noted that it is worth deciding in advance on the size of the paper from which we will cut out the snowflakes. Optimal size, in our opinion, there will be A5 sheets (this is half of a regular A4 landscape sheet).

Once the appropriate material has been selected, you can proceed directly to cutting out the snowflakes.

We tried to make some really nice paper snowflakes. This is one of the best we have done.

How to fold paper to cut paper snowflakes?

The diagram below shows how you can fold the paper for further cutting. classic snowflake with 6 beams.

Fold a sheet of paper to cut out a six-pointed snowflake

As can be seen from the diagram, a regular sheet of paper of the format we have chosen is folded as shown in Figure (b), then the excess part is cut off (Figure (c)). Next, unfold the folded paper and bend it along the dotted lines as shown in figure (d). The resulting figure (Figure (e)) needs to be folded again along dotted line and then trim off the excess edges. That’s it, the paper is ready to cut out snowflakes :)

There are other ways to fold a triangle to cut out a snowflake. For example, the workpiece can be made as in the figure below.

How to fold a triangle to cut a snowflake out of paper

You can see the entire process from folding a piece of paper to cutting out a beautiful New Year's snowflake in the video below. Particularly complex curls and thin slits are best achieved with a utility knife.

VIDEO: DIY six-rayed paper snowflake

If you already know how to fold paper to cut out snowflakes from paper, then you can go straight to the templates for cutting out snowflakes. You can start with simple ones. Examples of such templates are shown in the figure below.

Snowflake patterns

Want to know everything possible ways folding a piece of paper to cut out six-pointed snowflakes? Look special video, where as many as THREE (!!!) such methods are clearly shown. Which one is better is up to you to decide!

Three ways to fold paper for a six-pointed snowflake

From the following videos you will learn how you can draw a pattern yourself to cut out a beautiful New Year's snowflake.

Drawing a pattern for cutting out snowflakes from paper

Drawing a pattern on a snowflake

Paper snowflake with a pattern containing large elements

Patterns on snowflakes containing thin slits (lines)

Templates and diagrams for cutting out snowflakes

There are many patterns and templates for cutting out paper snowflakes, examples of which we have already given. How can you cut a beautiful snowflake from a folded paper triangle with your own hands using patterns downloaded on the Internet? Everything is very simple!

Examples of patterns for cutting six-ray snowflakes from paper

In the examples above, you need to cut out the snowflake according to the diagram shown above so that only the white part remains, the black part must be cut off.

By analogy, snowflakes are made, the diagrams and templates for cutting which are presented below.

Here are examples of patterns for cutting out simple snowflakes from paper

More more schemes and templates for cutting out paper snowflakes that are easy to make, you can download from the link - Download snowflake cutting patterns

Paper snowflakes: selected patterns, pictures of snowflakes

Want to learn how to create your own Christmas snowflake templates? Do you need a program to cut out a virtual snowflake from paper, but don’t want to bother learning it? And rightly so! After all, there is a fun service where you can cut out snowflakes online - an exciting toy for your baby!

How to make a snowflake template in the Compass-3D program

Agree, a lot of time and paper can be spent on cutting out snowflakes blindly and choosing at least a few normal ones from the many freaks. In order to carefully work out the shape of a snowflake before moving on to cutting it out in kind, it is best to use some kind of CAD program.

Snowflake made of paper: draw a diagram yourself

Original patterns for making snowflakes can be created using computer-aided design systems. Let's look at this using the KOMPAS-3D program as an example.

Let's create a 3D model of our future snowflake. Open “File” - “Create”, select “Part”. First we need to create a sketch. We draw two auxiliary lines in it, intersecting at the origin of coordinates at an angle of 30° to each other, as shown in the figure below.

Creating a snowflake model in the Compass 3D program

Next, at right angles to the vertical auxiliary line, you can draw another line. The result is a triangular area limited on all sides. In this sector we have to draw the future template of a six-rayed snowflake. To construct various openwork elements and curls, you can use the Spline by Points tool. The result should be a snowflake template like this.

Sketch for cutting out paper snowflakes with 6 rays in the Compass 3D system

Now let's see what a snowflake cut out using this template will look like. Select our drawing with the mouse and click the “Symmetry” button in the “Editing” tab.

Create a template for cutting snowflakes from paper

Now all that remains is to select the resulting ray of a six-pointed snowflake, in the “Editor” tab, select the “Copy” - “Circle” item. We indicate the center - the origin of coordinates and 6 copies in increments of 60 degrees. It should look like the picture below.

The snowflake is almost ready

If you wish, you can display everything in 3D and take a better look at the resulting beauty. But in principle, everything is already perfectly visible, so there is no need to waste time on this. If you are satisfied with the result, just save the above template to disk in a suitable format, print it on a sheet of paper of the desired size, and you can start cutting out the snowflake.

To make a snowflake template from a three-dimensional model, create a 3D drawing in Compass (Click the mouse in the top menu “File” - “Create” - “Drawing”), insert a view from this model into the document, select the appropriate scale and print it on a printer.

Paper snowflake template from 3D model

Cut it out and voila! Another beautiful snowflake is ready!

Having “played” a little with the NURBS curves of the above snowflake model in the Compass 3D program and slightly modified external form ray, we get another beautiful snowflake, from the model of which we can again create a ready-made template in a matter of minutes.

Of course, using a CAD program to make paper snowflake templates is not the easiest option. But don’t be upset, because there is an intuitive and simple program for drawing snowflakes - the Snowf graphic editor, which even a child can use. When drawing a pattern in this program, you do not need to draw any axes, mirror anything, etc. - everything is done absolutely automatically. The intuitive interface allows you to master the program in a matter of minutes. To draw snowflakes, you just need to move the mouse and watch how the pattern on the screen changes.

Other options for making snowflakes

Snowflakes made using a hole punch look original. Making them is easier and faster than cutting out complex patterns.

First, we pierce the workpiece in several places.

After this, using scissors, we connect the resulting circles together. Below are examples of paper snowflakes. done in this way.

To cut out such multi-beam snowflakes, a sheet of paper is folded according to the pattern that is clearly shown in the article (see Blank No. 2).

As you can see, cutting out a snowflake with your own hands is not so difficult, you just need to use your imagination! 🙂

The diagrams and video tutorials given in this article will help you and your children learn how to cut out amazing New Year's snowflakes that will bring a holiday atmosphere to your home and will delight the eyes of others!

Or are also very popular decorations for the New Year.

How to make 3D snowflakes from paper? Let's watch the video!

Beautiful DIY 3D paper snowflake

Volumetric 3D snowflakes made of paper. 3D Paper Snowflakes

Stunning paper snowflake using quilling technique!

Truly openwork results that look very unusual and creative! Also, colored volumetric snowflakes can be assembled from separate multi-colored modules (master class on making New Year's snowflakes using the technique modular origami read).

And with a little fantasy and imagination, you can make amazing ones out of 3D snowflakes!

Let's find out what you can make a snowflake from, and also give several master classes on how to create it. The proposed crafts can also be used on walls, festive table, christmas tree and many other interior items.

What can you make a snowflake from?

The answer to this question is quite simple - from everything. After all, in fact, there are a lot of materials from which you can make a snowflake. Therefore the list is quite extensive:

• paper;
• beads and beads;
• cloth napkins;
• textile;
• thin branches of bushes and trees;
• wooden sticks;
• woolen threads and so on.

As you can see, there are quite a lot of options from which you can make a snowflake. The main thing is to show your imagination.

Plain paper snowflakes

When we talk about cutting out New Year's snowflakes, the first thing that comes to mind is a bunch of sheets of paper folded into a triangle. This is the most popular way to make a craft, known even to a small child.

So, to make these snowflakes, you will need paper, a pencil and small scissors.

Step-by-step instructions on how to cut a snowflake:

1. Take a simple piece of paper and make it square shape(Illustration 1). This can be done in two ways. First: using a ruler, measure four equal sides and draw a square, then cut it out. Second: fold the upper left corner towards right side and smooth the fold, cut off the excess paper.
2. Roll the sheet into a triangle (Illustration 2).
3. Make another triangle (Illustration 3).
4. Fold the right side to the middle of the triangle, then fold the left side (Illustration 4).
5. Cut off the extra “tails” (Illustration 5).
6. Draw a diagram with a pencil and cut out a snowflake (Illustration 6).

Beautiful New Year's snowflakes - stencils

In this way, as described above, you can make a huge amount of absolutely different snowflakes. All the variety lies in the use of templates.

If you have already become a master and know how to cut out beautiful New Year's snowflakes, you don't need stencils. After all, you can draw any design yourself and cut it out. The main difficulty is to make a beautiful snowflake in the end. But this doesn’t always work out.

If you don’t really want to bother yourself and invent patterns, then you can use ready-made stencils. They can simply be redrawn onto the blank and cut along the contour.

In the illustration above you can see examples of such stencils. In fact, there are a huge number of them and only you can decide which snowflakes you want. After all, depending on the pattern, you may end up with a craft that is openwork, more square, with a pattern of figures, and so on.

Most often, the more curls and fine lines in a stencil, the more airy the finished product will be.

What paper is suitable for creating snowflakes?

To make paper snowflakes, almost any paper will do. The main thing is that the sheet can be easily bent and then the pattern can be easily cut out of it. Therefore, it is better to use the following options:

• office paper (another name is for printer);
• album sheets;
• colored paper;
• for origami;
• for decoupage with patterns;
• kitchen napkins.

You can also make snowflakes from cardboard, just in a different way. After all, this type of paper is difficult to bend several times. And cut it out subtle patterns It definitely won't work. Therefore, if you want to make a cardboard snowflake, then this must be done in the following way: draw all the outlines of the craft on a whole sheet of paper, and then cut it out.

Snowflakes 3D

Volumetric snowflakes (3D) look very beautiful as interior decor. They are made from several sheets of paper.

Master class on how to make 3D paper snowflakes:

1. Take a piece of paper and make it square (Illustration 1).
2. Fold the paper in half to form a triangle.
3. Using scissors, make triangular cuts at least three times, as in illustration 2. The number of cuts depends on
4. Open the sheet and connect the ends of the first cut square with PVA glue (Illustration 3).
5. Turn the snowflake over and glue the ends of the second square in the same way (Illustration 4).
6. Turn the piece over several times until all the squares are wrapped (Illustration 5).
7. Make five more pieces of the same size in the same way.
8. When all the parts are ready, they need to be glued together. Take two parts and glue them together at two points: at one end and in the middle (illustration 6). Connect all six parts in this way. Straighten out the loose ends.

All is ready! You have a voluminous snowflake.

The second method of making 3D snowflakes

To make such voluminous snowflakes, you don't need a lot of paper. For one craft you will need to cut only twelve strips of equal width and length.

The procedure for creating a three-dimensional snowflake:

1. Slice required amount strips (Illustration 1).
2. Take two strips and glue them together to make a cross (Illustration 2).
3. Place two more strips on the sides of one of the strips, only now above or below the perpendicular part (depending on where the first one is located) (Illustration 3).
4. Do the same, but in the other direction. As a result, you should get something like in illustration 4.
5. Now take the two ends of the side strips and glue them together (Illustration 5).
6. Repeat the same with three more sides (Illustration 6).
7. Make another exactly the same part (Illustration 7).
8. Slightly bend all the loops inward on each piece (Illustration 8).
9. Connect the two parts together by putting the resulting loops on the remaining strips (Illustration 9).
10. Fasten them together with glue.

The original volumetric snowflake is ready!

Advice: so that all the elements stick together faster and better, and do not fall apart during the work, connect necessary points using paper clips.

Snowflake made from fabric napkin

To make wonderful snowflakes from napkins, you don’t need any additional materials, except for the finished piece of fabric. All you need is sleight of hand and the tutorial below.

Instructions on how to make snowflakes from napkins to decorate the New Year's table:

1. Take a clean and ironed linen napkin (Illustration 1).
2. Fold all corners towards the center (Illustration 2).
3. Fold the new four corners toward the center again (Illustration 3).
4. Hold the central part of the napkin and turn it over to the other side (Illustration 4).
5. Fold the four corners towards the middle (Illustration 5).
6. Holding the middle so that it does not open, turn the inner parts forward at all corners (illustration 6).
7. Now lift up the corners remaining at the back (Illustration 7).

The snowflake napkin is ready!

Tip: to prevent the craft from falling apart, you can clamp the middle using special clamps.

Wicker snowflake

Original crystal fluffs are obtained from beads. Then they can be used as New Year's toys. In this case, snowflakes are hung on the Christmas tree by a thread or fishing line.

Instructions on how to make a pendant on a Christmas tree:

1. Take three types of beads: 8 mm, 4 mm and 2 mm. You also need a fishing line about 70 cm long (Illustration 1).
2. Take a fishing line and string 5 beads measuring 8 mm onto it (Illustration 2).
3. Place the sixth bead and pass the other end of the fishing line through it to create a loop (Illustration 3).
4. Tighten the loop (Illustration 4).
5. At one end of the fishing line, place beads in this order: 4 mm, 2 mm, 4 mm, 2 mm (Illustration 5). It will be more beautiful if you use beads of two different shades.
6. Next, string the beads in this order: 8 mm, 2 mm, 8 mm, 2 mm, 8 mm, 2 mm (Illustration 6).
7. Now pass the used end of the fishing line through the second 2 mm bead (Figure 7).
8. Tighten another loop (Illustration 8).
9. String beads onto the working end of the fishing line in the following order: 4 mm, 2 mm, 4 mm (Figure 9).
10. Pass the fishing line through the bead from point 3 (Illustration 10).
11. Pass the right end of the fishing line through another large bead and string the following beads onto it: 4 mm, 2 mm, 4 mm, 2 mm (Illustration 11).
12. String the following beads: 2 mm, 8 mm, 2 mm, 8 mm, 2 mm, 8 mm, 2 mm. Pass the line through the second 2mm bead and put on the 4mm and 2mm beads (Illustration 12).
13. Pass the line through the beads shown in illustration 13.
14. Tighten the loops (Illustration 14).
15. Pull the line through the adjacent large bead (Illustration 15).
16. Weave three more sides of the snowflake in the same way (Illustration 16).
17. Continue weaving the tops of the snowflake on the other side of the fishing line (Illustration 17).
18. Pass the two edges of the fishing line through several different beads and tie small knots (Illustration 18).

The snowflake is ready! All that remains is to tie a ribbon, thread or piece of fishing line so that the craft can be hung on the fishing line.

Using popsicle sticks

An absolutely wonderful decor can be made from ordinary wooden ice cream sticks (for example, popsicles). You either need to collect them or buy them (they are sold large sets from 50 pieces or more).

First, assemble a snowflake of any shape. When you like everything, carefully glue it together using wooden sticks between themselves. Then paint the structure any color you like. acrylic paint. It applies very well and dries quickly.

When your snowflake is ready, make a hook out of wire and hang it on the wall or door. This is a very simple and at the same time stylish room.

Tip: to make the craft look neat, sticks should be stacked on top of each other on only one side.

Natural materials come to the rescue

Snowflakes made from the most beautiful look simple cones, which can be collected while walking through the forest.

To make one like this original craft, you will need about nine small cones. Connect the materials together using glue gun. To do this, drip glue onto the back of the cones and tightly connect them together. That is, the “butts” should be in the middle, and the curvy parts form a snowflake. To make the craft look more elegant, cover it with white paint and sprinkle silver glitter on top.

Traditional, familiar and beloved room decoration for New Year's holidays These are paper snowflakes. They can be large and small, voluminous and flat, single and in a garland. There are a lot of options, everyone will choose the right one for themselves, and in this article we will look at the most basic ways of how you can make snowflakes for the New Year with your own hands from paper with detailed description and photographs.

For work we will need 1 A4 sheet; it can be colored or white. Fold it exactly in half lengthwise, then into an accordion. The edge of the accordion is two centimeters. Unfold and cut in half along the fold line. We received 2 identical accordions.

On the outside of the accordion we draw the outlines of a snowflake, as in video 1, and cut it out. We draw the second accordion and cut it out in the same way.

We glue openwork accordions together and fasten the middle with glue. We received a beautiful carved snowflake.

Huge snowflakes made from paper bags

Let's try to make three-dimensional ones with our own hands for the New Year; step-by-step photos with descriptions are given below. These paper snowflakes are very unusual and interesting.

They come out voluminous and beautiful due to the fact that they need to be made from paper bags, which you can buy or pre-glue yourself.

For this work we need (for 1 snowflake):

1. Paper bags 30 * 9 cm.
2. Cardboard strips 20 * 9 cm and 20 * 1 cm.
3. A simple pencil and a ruler.
4. Scissors.
5. Glue or thin double-sided tape.

We make a snowflake like this:

1. On cardboard 20 by 9 cm, draw a template of one repeating part and cut it out.
2. We transfer the template to bags and cut it out. For 1 snowflake you need to use 10 bags, from which we will get 10 rays of a snowflake.
3. Next, in the center we glue each ray with the neighboring one. To do this, spread a strip of glue or glue double-sided tape or adhesive tape.
4. We unfold our volumetric snowflake and also fasten the outer rays together.

Any snowflakes can be lightly smeared along the edges with glue and sprinkled with glitter, or brushed over them with a dry brush. a small amount paints of any color, so you can shade a snowflake.

Star - snowflake

For this amazing and unusual, bright star - a snowflake, we need:

1. Colored paper. Sheets 11 by 16 cm. Six sheets of different shades.
2. Glue and scissors.

We roll each sheet into a tube and glue it, then fold it in half and cut it into 2 even parts. We glue all the parts, placing them on top of each other.

Cut off the top of the entire stack into a sharp corner on both sides. Unfold the stack and glue the ends together. The result was a star with sharp tips.

Children will really like these stars - snowflakes. They are bright and unusual, voluminous and large. They can decorate the entire room.

Large and colorful beauties

Let's see how to make colorful ones big snowflakes made from paper with your own hands for the New Year. These beauties are quite easy to make, and they look bright and beautiful. They are good for decorating children's rooms, kindergarten or school. Of course, they can be made plain white, as is customary, for this you can use office paper.

For creativity we need:

1. Colored paper of any shade, preferably double-sided. For 1 snowflake you need 2 leaves.
2. Scissors.
3. Glue.

Let's start creating:

1. Fold a sheet of paper into a triangle at an angle, cut off the excess.
2. Fold in half again straight from the top.
3. Next, bend the corners of the triangle into different sides to the middle.
4. Draw a line from the center to the corner and cut out a droplet.
5. Mark with a pencil and make cuts to create a snowflake openwork.
6. Unfold the snowflake and bend the strips of rays to the middle, glue them.
7. Make 1 more similar layer and glue them together in the center so that the rays of the top layer fall into the spaces between the rays of the lower layer.

That's all. You can hang a snowflake on a braid and decorate a room with it.

Snowflake using modular origami technique

Origami is a technique for creating amazing shapes from modules made from squares of paper. You can also make a snowflake using this technique. It will be unusual, beautiful and stand out from the flat and voluminous snowflakes we are used to. To work on modular snowflake we will need:

1. Squares of single-sided blue paper 10 by 10 cm - 8 pieces.
2. Glue.

We assemble the snowflake from 8 modules. They all add up the same way:

1. Bend the square diagonally with the blue side facing out. Fold in half again and unfold
2. We bend the long side to the vertical center line and bend the corner up. Fold the other side in the same way.
3. Open the paper square.
4. Using the folds, we assemble the module in the other direction, as in video 2.
5. We do all 8 modules in exactly the same way.
6. Now we add the modules. We put the white triangle of one module into the pocket from the other module and secure it with glue.

This is how we connect all the modules. We attach the braid and the snowflake is ready.

Snowflake - fluff, made from paper squares

You can make beautiful fluffy and voluminous snowflakes for the New Year with your own hands from squares of paper. Colored squares can be cut out from double-sided colored paper or take office paper to write in the shape of squares. 1 snowflake will take 6 squares.

To work you will need:

1. One and a half sheet of colored double-sided paper, from which we will make squares.
2. Scissors.
3. Glue.

We make a snowflake like this:

1. Cut out 6 squares, or use ready-made squares.
2. Fold them diagonally into a triangle.
3. Cut into strips 0.5 or 1 cm wide towards the center so that the center remains uncut.
4. These will be fluffy rays of a snowflake. Now we glue each ray one by one at the ends, then in one direction, then in the other.
5. Now let's connect 3 rays each, and then glue all three together in the center.

The main thing is to do everything carefully and follow the instructions. The snowflake will turn out to be joyful, fluffy and cheerful; it can decorate a nursery or any other room.

Shining fluff

This type of fall snowflake is similar to the method of making carved snowflakes from paper, which you can easily and quickly make with your own hands for the New Year. But we will sprinkle it with sparkles and it will begin to shine. For one snowflake we again need 6 squares, one for each ray.

We make a snowflake according to the description given above. We use squares for snowflakes for recording or cut our own according to your size and any color. Then we make glitter. We take tinsel and cut its terry finely onto a sheet of paper. Then coat the snowflake rays lightly with glue and dab them into glitter. Attach the braid to the snowflake and safely hang it on the Christmas tree or wall.

New Year's fluff

Now let's figure out how to make beautiful snowflakes - paper fluffs with your own hands for the New Year. These are fluffy and weightless creatures, they will create an amazing winter, Christmas mood in the room. They are easy to make; all you need is paper, scissors and glue.

For 1 fluff we need to make 3 squares different sizes. They should have a side of 20 cm, 15 cm and 10 cm.

We fold these squares diagonally into a triangle three times, cut out a ray and cut them, forming fluff. Then we unfold them and glue them together, placing smaller ones on top of the largest layer.

That's all, the fluffs are ready. They can be mounted on the wall, on curtains, and so on. You can sprinkle them with glitter or make them colorful using double-sided colored paper.

Snowflakes in an unusual technique

To create a large fluffy snowflake, you can use napkins and the trimming technique. To do this you need to cut out thick paper big snowflake template. It should be very simple, just 8 rays from the center. Next, prepare the napkins by cutting them into squares. Take any shade of napkins you like.

Now we do this:

1. Coat a piece of beam with PVA glue.
2. We twist 1 square of napkin onto a stick and attach it to the surface coated with glue. So we fill the entire snowflake, attaching each subsequent square quite tightly.
3. The closer the napkin pieces are to each other, the fluffier the snowflake will be.

This snowflake should be hung on a ribbon or placed on a table or shelf. It can be decorated with sparkles or any small decorative elements, supplement with artificial spruce branches.

To visualize how to make some other types of snowflakes for the New Year with your own hands from paper, watch the video on the topic.