How often should gel nails be done? Correction of nails with gel, acrylic at home

To bring nails in well-groomed appearance I need gel nails. During periodic procedures, the hands will always be beautiful and neat. The plate itself grows by about 1 mm per week, with growth of 2-3 mm (that is, after 2-3 weeks), you need to visit the salon and make a correction.

Why is timely correction of extended nails so important?

When growing back, the plates become unattractive, lose their previous view. Cracks may appear at any time.

Make a correction gel nails necessary in case of accidental impact or pinching of the platinum. Part artificial base may break and fall apart.

The gel coating itself does not last forever. It can crack, capturing the natural nail for this too. Cracks can cause trouble and pain, which is also a reason for a thorough procedure.

The gel coat often peels off the sides of the base. The cause may be the use of antibiotics, the presence of a chronic disease, cleaning or washing without gloves.

Gel nails are corrected depending on the cause and severity of the damage to the nails. There are small, medium and extensive procedures. A small variation provides for the elimination of delaminations, chips and scratches. At medium, the regrown part of the plate is filled with gel. If the artificial nail has shifted, peeled off or broken, then an extensive one is carried out.

Before the procedure, you can not wash your hands, apply cream. Before making a correction, you can independent manicure without nail polish. It is important to plan your time, do the cleaning in advance, so that at the time of the procedure and after it, your hands are free for some time.

Back to index

How is gel nail correction performed?

Correcting and correcting errors is more difficult than doing the job from the very beginning. Correction of gel nails is a painstaking work of masters, the success of which depends on their experience and skill. The moments that make up the step-by-step instructions can be traced independently and evaluate the work of the master himself.

Nail correction - milestone manicure. Over time, a plate that has been extended or painted with shellac grows back, which is why any pattern is distorted and becomes sloppy. To fix this, it is not at all necessary to completely remove the gel or acrylic, it is enough just to correct the shape or pattern.

Types of correction of extended nails

All types of correction are classified according to the complexity of the work:

• Small. Least labor intensive. Includes minor editing of the drawing or painting of cracks. It is also required if the nail was slightly damaged. mechanically(its edge was hemmed or the varnish was a little worn off);
• Average. This is a re-building of an artificial plate over a natural one. It is natural after any manicure. Includes painting and processing of the "fresh" edge;
• When the nail breaks, a complex correction is made. If the model has broken the plate or erased the varnish, then the master repeats the manicure procedure on one or more fingers. The same type of work is used in the deformation of the coating.

If the correction of regrown nails is a natural process, then the correction of broken or cracked plates is a necessary measure. To avoid this, it is enough just to handle them carefully, try to minimize the impact household chemicals and do not test them for strength.

Step-by-step instructions for gel nail correction

Gel nails correction at home includes:

1. Removal of old material;
2. Shaping;
3. Removal of the overgrown cuticle;
4. Manicure with gel polish.

Let's consider each stage in more detail. To remove old gel polish it is most convenient to work with a milling cutter. Of course, you can use special solvents or cut down the biogel with a file, but this is an atavism.

Frazier - special machine, which is used during manicure, extension and correction of nails. Includes nozzles for filing, polishing, smoothing inhomogeneous plates. Cutters allow you to minimally injure the plate and remove the old varnish much faster.

After that, with a nail file or the same nails given the desired shape. It is important not to leave too thin edges, otherwise they will break easily even with everyday work. For beginners, it is best to limit yourself to the classic semicircle.

Now the nails are soaked in the bath to soften cuticles. The skin itself is moved away from the plate into a hollow, where it is cut out with wire cutters or scissors. You can also buy a cuticle softener, which will allow you to remove it without cutting tools.

Step-by-step instruction shellac nail correction at home (plus photo):

1. A degreaser is applied to the plate. It must be carefully distributed, you can go a little on the skin;
   
2. When the degreaser is completely absorbed, it is necessary to apply a smearing layer of gel or base. To do this correctly, work with a flat, wide brush. So there will be no coloring, and shellac will be able to spread evenly;
   
3. After it, a camouflage layer is applied. You can apply any drawings on it or make a jacket;
   
4. The next step is to apply a transparent modeling layer. For the first time, it will be quite difficult for yourself to apply it evenly and accurately. Therefore, it is important to pre-train;
5. The surface (after drying, of course) is polished first with a file, then with a soft buff;
   
6. Only after this polishing, the nail is covered with a finishing gel polish and the correction is completed. Reviews claim that after the session, you can go another month before the next procedure. This saves a lot of time and money.

It is important to note that the technique of working with single phase gel almost identical, except for the speed. Such design and correction of nails can be performed many times faster than ordinary shellac. That is why it is called - express technique.

Acrylic nails correction

Before you do the correction of extended nails with acrylic, it is important to prepare everything tools:

• File with large grain (wide, optimal - 100x100);
• A cap for the monomer (a means is collected in it to avoid overspending);
• Powder;
• Degreaser, primer;
• Acrylic;
• Brushes and pipette.

As a degreaser, you can use ordinary alcohol or any tonic on alcohol based- they have the same functions. Also, before correction, the old varnish is removed, and the nail is slightly filed.

Step-by-step instructions for beginners with a video on how acrylic nails are corrected:

Video: Gel nail correction (nail design lessons)

1. The cuticle moves to the very bottom of the nail, after which sawdust is made. The technology is the same as for extensions. From the cuticle down to the hole, the nail file moves in a circular motion. This is necessary because the plate grows inhomogeneously. The goal is to level the old acrylic with the level of the natural surface;
   
2. Next, a quick cleaning is carried out from the characteristic plaque after sawdust. For this, a napkin, brush or towel is suitable;
3. As with biogel, first the surface of the nail is degreased. After that, a primer is applied to the dried plate;
4. Now the monomer capsule and the acrylic itself are taken. With the help of a pipette, the required amount of funds is collected. Further, a brush is dipped into the capsule, first it must be well moistened with acrylic. After that, everything superfluous looks like the walls of the container with the monomer;
   
5. At the tip of the brush is drawn a small amount of acrylic, after which it is lowered with the same tip into the powder and a ball is drawn on it in a circular motion;
6. The resulting ball must be very quickly and evenly distributed over the plate;
   
7. When spreading powder Special attention is given to the place where there is a seam between the old acrylic and the natural plate. The brush is slightly pressed into this area;
8. Before each next layer, the brush must be wiped on a napkin so that there is nothing superfluous on it;
9. Acrylic correction is most often carried out on tips. To do this, you need to attach a form to the plate and select the desired length from it. It must be applied under the nail and completely adjusted to the shape - so that there are no gaps and sharp transitions;
   
10. The acrylic in the capsule is replaced and correction work resumes. The system is the same as before. The brush is soaked in monomer and then dipped in powder. The agent is applied over the staples;
    
11. It remains only to dry the nails and paint them. You can make bright long claws with plates or, conversely, a flirty French correction of extended nails.

Many modern ideas corrections acrylic nails include the use of gel polish. Outwardly looks very natural (if selected correct length and form).

Ingrown toenail laser correction

A separate topic for many girls is the correction of ingrown nails. laser device. This technique appeared relatively recently, but quickly became the most effective in solving this problem.

An ingrown toenail is an unpleasant and dangerous phenomenon. For example, if it is ingrown on the leg, it can cause gait distortion or injury. For some time, a pedicure can save him, but on the leg, but often the effect is enough for less than 2 weeks.

How to perform laser toenail correction step by step:

1. The technology includes exclusively medical intervention. You should not wait for a pedicure or a plate to be filed - this is what beauty salons do. First, you will need to fill out some papers and choose the right painkiller, then, together with the doctor, decide on the type and strength of the laser beam;
2. Anesthesia can be carried out with subcutaneous lidocaine or using special creams (ointments);
3. The skin roller is removed first. It is he who is the main reason for the improper growth of the plate. The doctor simply burns it out with a carbon laser;
4. There is almost always a process under the roller, which is the main cause of ingrowth. It is corrected with tweezers and supported with gauze turunda for fixation;
5. Within a few days, the treated area will need special care. If it is summer outside, it is important to avoid dust and dirt, as well as to exclude swimming in open water, but if it is winter or autumn, it is recommended to wear spacious shoes.

average price laser correction- $10 per session. To find out exactly how much the procedure costs, you need to consult a doctor personally, demonstrate the scope of work and choose best option treatment.

- this is a "repair" of artificial turf, the purpose of which is to add material to the regrown area, change the design, shape and length of the nails. To make the nails look well-groomed and attractive, this procedure is recommended to be done every 2-4 weeks.

Types of correction

Masters nail service there are several types of corrections, regardless of the material (gel or acrylic) - it all depends on the condition of the nails, the complexity of the design. Distinguish:

A small correction is needed for minor damage to the nails, slight regrowth, and mechanical damage (slight detachment).

Medium correction is intended for those who wear nails for 4 or more weeks. During this time, the nails grow by 3-5 millimeters, the purpose of the correction is to hide the area between the natural nail and the artificial one, as well as to eliminate minor damage.

A large correction most often resembles modeling, as it is intended for a complete change in design, shape. The master can do such a correction when the nail breaks, severe peeling occurs.

Acrylic nails correction

Today we’ll talk about correction after a simple extension (without changing the watercolor design and “raising the smile line”).

Step-by-step instructions for correcting acrylic nails:

The first thing the work begins with is the treatment of the hands of the master and the client with an antiseptic.

Using nail polish remover, remove the coating from the nails. Push back cuticles with an orange stick. We remind you that on the day of extension or correction, you can not do baths for hands and nails. It is also not recommended to use oily creams, since such actions will lead to delamination of the artificial material.

Cut out all the pockets with a milling cutter (small detachments of acrylic), with a file (120-150 grit), wash down the artificial material.

Using a polishing buff, remove the shine from the nail plate and file (180 grit) natural nail(overgrown area, between acrylic and cuticle), remove dust.

Apply degreaser to nail plate and primer (wait for final drying).

Nails are prepared for the application of the material. Next, you need to pour liquid for acrylic into a small container, pour a little acrylic powder into a dry container.

Form a small acrylic ball with a brush and apply evenly on the nail plate. The material should not get on the cuticle, as there will be an air bag, which will lead to the exfoliation of the material and breakage of the nail. Apply acrylic alternately on all nails, smooth it with a brush from the cuticle to the free edge.

When the material is laid out, use a nail file (100-150 grit) to remove excess material, attach correct form nails. Particular attention should be paid to the cuticle area, here you can work on the nail with a soft nail file 180 grit so as not to injure the client.

With the help of a buff, remove all irregularities, grooves and polish the nails.

Design or varnish, treat the skin around the nail with cuticle oil.

Usually such a correction does not take more than one hour, but if it is necessary to perform a complex design, then the procedure can take 2-3 hours.

Acrylic nails correction video

Whatever nails you have, whether natural or extended, in any case, in order for your hands to always look well-groomed, you need to make a correction. Many people ask the question how to fix nails right, and can it be done at home?

The answer to such a question is quite simple. If you have any little experience and the ability to handle your hands, then, of course, you can adjust at home. But if you had nail extensions in the salon, then of course you should visit the same salon where you had them built up, since only a specialist in this matter knows what preparations were used for building up.

What is nail correction

The procedure itself is a special set of measures that will allow extended nails to look well-groomed. Very important procedure It is considered the adjustment of acrylic or gel nails. The frequency of this procedure depends on the growth rate of your natural nail.

No one can say with accuracy how often it is necessary to do such a procedure. On average, a correction should be done every two to three weeks. One thing to remember about acrylic nails.

The fact is that if your nail plates grew much more slowly before the extension, then after the extension, the process of healing the nail itself begins and, accordingly, their growth accelerates.

It is not at all difficult to understand when you need to make a correction, you just need to pay attention to your hands, and specifically to the cuticle and the gap between the acrylic, and it becomes clear that your hands need to be corrected urgently.

If you understand that you need urgent nail treatment, then you should not delay this matter, since such a procedure done on time saves artificial material nail from premature deformation and, of course, unnecessary material costs.

The first signs of poor-quality nail correction

If the correction is made in accordance with all the rules, then there should not be any deviations or delaminations. Although if the plate peeled off, this indicates that the material with which the extension was used does not suit you, or the process itself has been violated.

Common reasons why these problems occur:

• Very long free edge
• Careless handling of the built-up plate
• Chronic diseases that have passed into the stage of exacerbation
• Impact chemical compositions on hand
• non-compliance elementary rules nail care
  

What materials are needed for proper nail correction

If you decide to do it yourself this procedure at home, then you will need the necessary materials:

• Special liquid to remove acrylic
• A primer is a special adhesive
• Plate degreaser
• Acrylic
• Set of special files for polishing plates
• Tassels
• UV lamp

All these sets can be purchased in specialized stores or purchased separately.

Step-by-step stages of nail correction

How to do nail correction at home occurs in the fair sex very often. Of course, there is nothing complicated, the main thing is to follow the basic rules, and in no case deviate from these rules, otherwise you will have to go to the salon to correct the wrong you have done correct correction.

• Before starting the procedure, you must treat your hands with a special disinfectant.
• Remove a layer of varnish special liquid without acetone
• Cuticles are treated with a special liquid that softens them. After that, a soft layer of the cuticle is pushed back with a special wooden spatula.
• Remove residue with a lint-free cloth. It is necessary to carefully process the free part of the plate with a file, give it desired shape. You can cut only 2/3 of the thickness of the material itself.
• Shine must be removed from the surface of a natural nail.
• Treat the exfoliated places with a file that has a fine abrasiveness.
• Remove accumulated dust from the plate where there is no acrylic with a special degreasing compound.
• A primer is used to process a plate that connects the keratin of a natural nail with an artificial one.

After that, it is necessary to make the correct modeling of the nail plate. To do this, you must also follow strict rules:

• In the area of ​​​​the lateral sinuses and cuticles, acrylic should not get on the skin.
• Acrylic should be applied to the nail plate in an even layer.
• The brush used for nail extension should be made only of natural bristles.
• After all the stages of nail correction are completed, it is necessary to place the fingers in a special ultraviolet lamp for 2-3 minutes.
• After ultraviolet radiation, a special oil is applied to the cuticle.

As you can see, it is absolutely not difficult to process your hands yourself. The main thing in such a case is to comply with all the listed requirements and rules.

Instruction

Nail correction gel- this is the application of the gel on the overgrown part of the nail. Correction should be carried out every 2-3 weeks, depending on the growth of your nail plate.

Correction of nails is carried out in the following order. First, hands should be treated with special disinfectants and the old lacquer coating, if any has been applied.

Then gently push the cuticle away from the nail plate so as not to damage it when correcting the nail, while using an emollient care product. Remember that during the correction it is undesirable to use wire cutters (only in case of emergency). After that, with a special file, treat the places of peeling of the gel from the nail plate or its deformation. This must be done very carefully so as not to damage the "live" nail. Clean, dry and glue this part.

The next step is to use a file to remove part of the material from the extended nails, while the movement of the file should be parallel to the location of the nail. Then you should disinfect your nails and treat them by special means, not providing negative impact and maintaining the normal condition of the nail plate.

After these preparatory stages lay out the material, using a drop of gel on each nail (you should not use more than the norm). The gel should not come into contact with the skin of the fingers. It is also not recommended to apply the gel on several nails at once, you need to work with each nail separately. Then the nails should be lowered into a special lamp (in the order of applying the gel), in which the gel hardens in 20 seconds. After applying the gel to all fingers, place your hands in the lamp for another 2 minutes to consolidate the result.

In conclusion, process the laid out material with a file so that the nails are even and neat. The surface of the nail should shine. Then you need to wash your hands and apply varnish, as well as softening and protection products not only for nails, but also for hands. Correction can be completed with a hand massage.

Helpful advice

The correction procedure is quite simple, the main thing is to observe correct sequence and approach the matter carefully and carefully. Then extended nails will delight you for a long time.

Sources:

• how to make nail correction video

Every year the nail extension procedure gel is becoming more and more popular. This happens due to the increased interest in it from women who cannot boast of the natural beauty and health of nails. Extension helps to create an elegant manicure and makes appearance manicured nails.

You will need

• - gel;
• - nail file;
• - means for degreasing;
• - tips;
• - glue;
• - tip cutter;
• - UV lamp;
• - forms for nail extension

Instruction

First of all, prepare your nails for the extension procedure. Cut them off and use a nail file to sand the nail plate well. This is done so that the gel does not subsequently exfoliate. Then apply on treated nails degreaser and leave for a few minutes, but no more than 5.

Carefully choose artificial nails(tips) on each finger. Put a drop of glue on the first tip and apply it to the nail. Press firmly and hold for a few seconds while the glue dries. Do the same procedure for the rest of the nails. Make sure that bubbles do not appear at the place of gluing, otherwise the manicure will not last long.

When all the tips are glued, take a tips cutter and use it to carefully cut them to the desired length. File the tips of artificial nails with a nail file. Then open the bottle with gel and mix it with a brush. It is necessary to interfere only with the part of the gel that will be used during the procedure.

Put some gel on the brush and start applying it to the nail. Try to distribute it as evenly as possible, while filling the space between the tips and the base of the nail, so that the surface is even. Put your hand under an ultraviolet lamp and wait a couple of minutes for the gel to harden.