How to make flowers from long balls. How to make a flower from sausage balls? DIV tag

Do you dream of learning how to make balloon bouquets with your own hands? Master twisting - the art of making figures from balloons. Basic rules necessary for such creativity:

• the ball should be soft, there is no need to fill it with air completely;
• you need to start twisting the ball at the base, from the “neck”;
• Twisting can only be done in one direction.

What balls are used in twisting? In addition to the usual latex ones - round or oval - familiar to everyone since childhood, modeling balls (SMBs) are very popular. The ball is a conditional name; when filled, it rather resembles a long stick from which you can create any shapes you like. A bouquet of mylar (foil) balloons looks very piquant. They are not only stronger than latex ones, but they also have an unusual shape - in the form of hearts, stars, and some kind of figures. Such a bouquet on a stand at the entrance to the hall sways as if alive in the slightest breeze (if the flower balloons are filled with helium). And the last squeak - glowing balls. For this type, ordinary latex ones are used, but an LED and a battery are built inside. A stand for a bouquet of such balls will create an interesting color accent. In the master class on a do-it-yourself bouquet of balloons on a stand, the simplest and cheapest latex balls and ShDM.

Bouquet of balloons

Tools and materials

Step-by-step instruction

1. We start with the red ball. Fill it generously, leaving 3 cm of empty space at the end.
2. We tie the ball without a thread: wrap the ring around two fingers (around the middle and index fingers), insert the end of the ball into the resulting loop and tighten the knot.
3. We tie the beginning to the end, fold it in half and twist it twice at the fold.
   
4. We twist the ring folded in half in two places to divide it into three equal parts.
5. We fold the entire structure in the form of an accordion.
6. With one hand we hold the ball in the twisted places, and with the other we twist it in the center and get a flower - a daisy with six petals.
   
7. Let's move on to the stem. Fill the green balloon, leaving a little space at the end, and tie a knot.
8. 10 cm from the base of the ball we bend and mark the place of twisting, focusing on the knot in order to hide it in the place of twisting.
9. We insert a stem into the middle of the flower (as in the photo) so that the twisted part of the stem is on top.

   

10. If you need to make leaves, measure 10 cm in the middle of the flower, twist the ring and straighten the leaf.
11. We perform this operation with each flower.
12. When all the flowers have been collected, the bouquet needs to be decorated. Choosing a ball for modeling suitable color and fill with air, leaving 7cm at the end.
    
13. Having tied a knot at the end, step back 5 cm from it and twist the leg, trying to hide the tail in the twist so that you get a ball at the end.
14. We connect the ends of the ball into a ring, orienting its size to the thickness of the bouquet.
15. The tip of the ball must be cut off right down to the knot so that it does not interfere. The blank for the ribbon is ready, all that remains is to tie a bow.
16. For the bow, inflate another equally soft balloon almost to the end.
    
17. At a distance of 30 cm from the knot, we twist it in the form of a fairly large loop.
18. Next to the first one we twist another loop of the same type, checking the ends of the ball so that they are at the same level.
19. We connect the resulting bow with the first ribbon ball, beautifully wrapping the ends in different sides.
    
20. We insert a bouquet of balloons into a ribbon with a bow. Options for ribbons, as well as bouquets of balloons, can be different. See the ideas in the photo.
21. Using flowers from balls without leaves, you can arrange a composition on a stand, for which you need to align the stems and tie the bouquet with thread.
22. Having decided on the height of the structure, we twist the entire bouquet. At the place of twisting, the balls must be tied in pairs, releasing air at the ends of the balls. We put the flowers aside and move on to the stand.
    
23. For the stand, we inflate 5 round balloons and connect them to each other in the form of a pair and a triple.
24. We perform the same operation with five-inch balls. Pairs and triplets of balls must be twisted together.
25. We attach a weight in the form of a five-inch ball to one of the flower stems, filled with water, cut off the free ends from the remaining stems.
26. We insert the load into the stand from big balls. Between the large balls and the stems in the second tier we put on a stand of small round balls.
27. We fill another one with air long ball the same color as the stand. The ball should not be very tight - we will make beads from it, twisting the beads strictly in one direction.
28. We connect the beads into a ring already on the bouquet, tie it and cut off the excess. The bouquet on the stand is ready.
29. If there are any unclear parts in the description, you can watch the process of making flowers from SDMM on video.
    

Using this simple technique and you can make the most of your imagination different compositions for holiday decorations. A bouquet in a basket of balloons looks beautiful; you can decorate a hall or stage with a garland. There is no greater pleasure than decorating own wedding with your own hands.

By decorating the hall with bouquets of balloons at a wedding, you will not only save on fresh flowers (which is especially important in winter time), but also fill even a very large room with several compositions from ShDM.

Mono-groups of one type of flower (daisies, tulips) are considered the most stylish. Such an original non-standard bouquet can be made for wedding bouquet brides (see photo), especially if the wedding is themed. Flower beds are also popular in the design of a banquet hall.

Hand-made bouquets, of course, do not have the aroma of fresh flowers, but they will bring no less joy - both the process of creation and the result. The main thing is to start.

Unique - we create it ourselves. How to make and arrange, read our article.

When the holidays come, we certainly want to somehow decorate the interior of the room in which the celebration will take place, thereby arranging original surprise for our loved ones and loved ones. Of course, today there are many companies that do this professionally, high level, however, their services are so expensive that not everyone can afford such a luxury. And yet, this is not a reason to abandon the idea of ​​​​creating an atmosphere of joy and fun at festive event. Balloons are a great way to decorate any of your celebrations. It is they, like nothing else, that are capable of giving people truly childlike joy.

Some secrets on how to make balloon flowers

It is advisable to start your modeling (twisting) with the simplest, but at the same time the most popular figures - flowers, since they are always the most welcome guests at both adults and children's parties. Before making flowers from balloons, you need to purchase a set of special ones for inflating balloons. ShDM balls(balls for modeling). Next, when creating your composition, you need to take into account that you need to inflate the balloons in such a way that they all end up being the same size; for this, they usually use a homemade cardboard or foam template with a certain diameter. You can also count the number of complete strokes of your pump.

How to make flowers from balloons? A simple way for beginner twisters

Consider the process of making a flower with my own hands Using a specific example, let's try to collect a noble and graceful iris.

Since we want to make a flower out of balloons as similar to the original as possible, for the petals we select a pink or violet shade, and for the stem, of course, green. The balloon should be inflated so that a small tail (3-5 centimeters long) remains unfilled with air.

Fold the ball in half and tie the ends.

Then the resulting circle must be twisted in the center to create two loops of the same size.

Having folded the loops, twist them again, but this time so that one loop is one third, and the second is two.

Thus, we will get a bud very similar to a real iris.

The green ball should be inflated in the same way, leaving a small tail.

Having made several twists, as shown in the figure, we form leaves on the stem.

Then we connect the bud with the stem - and our iris comes to life.

If before you had no idea how to do it, now, by turning on your imagination, you can come up with many various colors and decorate any interior. Great idea It will be a decoration of the path, the perimeter of the room or terrace for the celebration with a border of airy flowers. Flowerbeds of such flowers, placed between tables, in the corners of the hall or stage, will also look great. And panels made up of large flowers attached to the walls, or bouquets hanging from the ceiling on a fishing line will be your great find as a novice designer. And don’t forget to take a memorable photo of balloon flowers - a masterpiece made by your own hands. This bright photo will certainly warm you up, dispel melancholy and lift your spirits on any gloomy and cloudy day.

People who have seen this procedure more than once have probably wondered: how to make a craft from a balloon? We will now try to answer this question.

A little about making crafts from balloons

Flowers and crafts made from colorful balloons are wonderful decoration for any interior. They will be appropriate for all kinds of children's parties, but it is impossible to imagine any “adult” event without balloons. gala event, for example, birthday or corporate party. Air balloons always create a cheerful and cozy festive atmosphere.

There are many companies and enterprises that deal with decoration banquet halls, but it’s actually easy to learn how to make balloon flowers with your own hands. Whole bouquets, figurines and even panels are also created from them. Making them allows you to immerse yourself in a magical atmosphere long before the expected event.

The creation of decorations should be approached responsibly. It is necessary to think through and strictly define general principle decorate the room, calculate where which flowers, bouquets and single balloons will be located; in accordance with the calculations, the necessary materials are purchased.

Particular attention should be paid to the balls unusual shape. It’s better to practice making flowers from sausage balls in a video about how to make them in advance. These balloons are most easily inflated with a simple hand pump. The basic rule that must be followed when making all types of flowers or other figures from sausage balls is: all twisting is done with one hand and only in one direction, that is, you should twist “towards you” or “away from you”. At this time, the second hand should hold the first and penultimate elements of the craft. This rule This is done to make the work easier, otherwise there is a risk that the ball will unwind and you will have to start the whole process all over again. Attention to the video:

Often, some masters prefer to use gel balls for flowers, but working with them is much more difficult than with ordinary ones, so we will not dwell on them in detail.

How to make a flower from a sausage ball

The easiest flower to make, which is also the least consumable, consists of only two multi-colored sausage balls.

The stem, leaves and base of the flower are made from a green ball, and for the petals a second ball of any color of your choice will be used. To make the stem, inflate a green balloon, leaving the last 10cm free. First you need to make the leaves. Fold the ball like a snake and twist it in the places where the leaves will be attached to the stem. Next, at the end of the ball where the knot is located, you need to twist it, similar to a tulip. To do this, push the knot deep into the ball to approximately the level of the second phalanx of the index finger. The knot is compressed inside the ball, and the finger is pulled out, thus the knot is clamped. Then twisting is performed so that the knot is below its level. The result should be a beautifully formed center of the flower.

After this, work continues with the ball from which the petals are made. The ends of the ball are connected together, and the place of its middle is marked.

We divide the ball into three identical parts, which are secured with simple twists, in which one hand holds the ball, and the other spins it around its axis several times.

The resulting structure folds like a fan.

Then all the balls must be pressed tightly in the places where the twists are made and connected together, and then the whole thing must be twisted with a lock.

And so we got a flower that consists of six petals.

All that remains is to thread the base located on the green stem into the center of the flower, and your flower is ready!

Before you dive headfirst into creative process, pay attention to the twisting technique. All twists are performed in one direction. Use your free hand to hold the first and last bubbles, this will help maintain their shape and prevent the ball from unwinding.

One - chamomile, two - chamomile!

To make chamomile from balls you will need two green and white balls and a hand pump. White color The balloon does not limit your choice; to create a multi-colored bouquet, choose the color you like.

Using a pump, inflate the balloon so that the tip remains at least 3 cm. Tie the beginning and end of the balloon with two knots. Bend the structure in half and twist it in the middle twice. Divide the ball into three equal parts and twist in two places. Fold the accordion and hold it with your index finger and thumb in places of twisting. Right hand twist the three petals. This completes the creation of the flower and it’s time to move on to the stem.

Inflate the green balloon all the way, but not too tightly, so that twisting manipulations do not cause its damage. Step back 10 cm from the tied knot, bend and twist the ball so that the knot is located at the point of twisting. Insert the stem into the middle of the flower.

Million Scarlet roses

One more is enough a simple flower, which can be obtained from the modeling ball, is a rose. To make it you will need two red balls and two green ones. Fill the balloons using a pump and secure the end firmly. To get a bud, fold the ball in half, twist its ends and mark the middle. Fold the resulting structure in half again and twist. As a result, you will get four petals.

Fold one of the green balls in half and tie the edges. Divide the ball into three equal parts by eye to obtain three leaves. Fold each part in half and twist. Screw the ends of the red bud ball obtained earlier to the middle of the corolla. The second green ball will become the base of the stem. Bend the future leaves into a loop and twist them around the stem.

The second red ball will become part of the bud. Inflate the balloon and tie it in a loose knot, tying the ends together. To connect the two parts of the bud into the second element, insert your hand, squeeze the four petals and thread them like a loop. Attach the stem to the end of the first bud ball by twisting the ends. To get a bouquet, connect several flowers with a bow ball.

If you need to present original gift for your relatives or friends, to decorate your home or just to cheer you up, try making a flower out of balloons yourself.

This process can captivate all members of your family so much that you will collect a whole colorful bouquet. But first, study small master class, and also carefully consider the photo instructions.

To make a composition you will need a clear preparation plan and set of following materials:

• Balloons, 7-10 pcs.;
• cardboard, 2 sheets;
• pieces of wire or thread for fastening;
• strong thread or tape, 1 pc.;
• modeling balls;
• hand pump.

First of all, carry out row preparatory work:

1 . Draw 2 circles with a diameter of 10 and 15 cm on pieces of cardboard. Carefully cut out the holes; they will be useful to you as holders or templates.

2 . Inflate 5 balloons of the same color one at a time.

3 . Insert each ball into the middle of a cardboard template, 15 cm in diameter. This way you will get 5 identical “petals” for your flower. If the ball is a little larger, deflate to the size you need.

4 . Tie the end of each ball with thread.

5 . Take cardboard template with a diameter of 10 cm and select the size for two more balls, but of a different color. They will serve to create the middle of the flower.

This completes the preparation process. At the next stage, we will create flowers from balloons, collecting the existing elements into a single composition.

1 . First you need to connect the first pair of inflatable balls left for making petals. Make sure that they are directed in different directions and tie the ends together. To hold the balloons together, it is best to use thin wire. However, if you are afraid of piercing the product, use regular thread.

2 . The remaining 3 “petals” are also connected to each other, trying to distribute them evenly to create a Y-like composition. For convenience, hold the ends of the balls with one hand, and use the other to secure the thread or wire.

3 . Connect 2 sets of “petals” together and fasten them along old scheme.

4 . Now you need to twist the composition so that all the balls protrude outward, and their ends are securely fastened in the center. At first, the flower may not look aesthetically pleasing, but all the elements will fall into place after the middle is fixed. Connect the central balls together according to a pattern already known to you.

5 . At the final stage, wrap the central balls around the composition of “petals”. This way you will get a floral “center” on each side of your flower and achieve a 3-D effect. Attach a ribbon that you can use to hold the flower with your hands.

You can also make a special “stalk” in advance using wooden sticks, painted in green color. Having spent very little time, you created a flower from balloons with your own hands.

Flowers made from sausage balls - instructions

To roll this flower option, you will need a hand pump and two long ball for modeling, preferably different colors. The photo below clearly shows how to create flowers from sausage balls, The instructions are clear and quite simple.

1. First, inflate a balloon that will serve as the base for the flower.
2. Leave 2-3 centimeters at the end to tie a knot.
3. Fold the ball in half, divide it into 3 parts, and then twist it in two places.
4. We place the resulting “sausages” in a kind of accordion, which should be held with a large and index finger one hand.
5. With your other hand you need to twist the ball 2 more times.
6. Thus, we will get the upper part of our flower, consisting of 6 petals.
7. To create the stem, we will need to inflate the second balloon and divide it into 2 uneven parts.
8. The smaller part should be 10-12 cm. It is used to create a small ball, which will serve as the middle of our flower.
9. Insert the stem into the center flower arrangement and form leaves.

Video tutorials: how to make flowers
from balls?