Chuni from an old sweater. We sew warm slippers from old sweaters

30.09.2019

Something new and original. It's always nice to slip your feet into a pair of soft, warm and fashionable slippers with ease and rustle in such cozy shoes about your business. Today we will be sewing these trendy Scandinavian type slippers (with low heels and sidewalls): in the end, this will surely turn out to be the most comfortable pair you will ever wear! You can sew them from any material, for example from felt, but in this master class we will sew such slippers from an old sweater.

Prepare:
- Paper and pen to create a pattern;
- 2 sleeves from old sweaters or ½ meter of knitted material (you can also from old sweaters - from the front and back);
- Fleece, half a meter;
- Hard felt or felt, a quarter of a meter;
- Sharp long scissors, sewing is best;
- Pins;
- sewing machine;
- A needle for thick and hard materials for a sewing machine (or sew on your hands with a large thick needle with a thimble);
- Strong thick threads (still suitable for a sewing machine);
- Iron;
- sewing centimeter;
- Ordinary needle.

1. Lay a sheet of paper on the floor, place each foot comfortably on the sheet (perhaps separate for each foot), in turn, circle the feet with a pen. Mark with a pen which pattern is left and which is right. Next, draw a top-side pattern - one for both legs - following the example of the one you see in the picture below, only corresponding to the length of your particular leg. Cut out patterns from paper.

2. If you are using the sleeves from an old sweater, cut them off at the shoulder seam. If knitted material, fold it in half along the entire length. Lay the top-side pattern over the area of fabric with the pattern you want to see on top of the slippers. In this case, the line marked as “Fold” must be exactly on the fold of the material. Pin with pins.

3. Cut out a piece of material according to the pattern with scissors, adding 1.3 cm to the pattern on each side, except for the fold. Remove the pattern and repeat the same with the top piece for the second slipper. Remove the pattern again and cut the same pieces of fleece twice.

4. In total, you should now have 2 upper parts made of knitted material with a pattern and 2 upper parts made of fleece on your hands: expand them. The last two pieces will be the top lining for the slippers. Set all 4 pieces aside for now.

5. Fold the fleece in half again along the entire length and pin the bottom pattern of the slipper for the left foot to the fabric with pins (this time not to the fold, but at a distance of at least 1.3 cm from it). Cut out a new two-layer slipper piece with a 1.3 cm indent from the pattern around the entire perimeter. Repeat with the bottom pattern for the right leg. In total, you will have 4 parts in your hands, 2 pairs each. Mark which two-layer part is right and which is left.

6. Pin in turn each lower pattern of slippers (right and left) to the felt and cut out of it, but without an indent of 1.3 cm, there are 2 more details in total: these will be the stiffer soles of your slippers. Mark which sole is right and which is left. And again: in the picture below, the felt is doubled because the author has one bottom pattern for both feet.

7. Flip the two-ply pieces back up (the toes of the pieces will now face different directions), peel one layer from each and set aside for now, then, centered on all sides, put the corresponding felt soles on your remaining fleece pieces. Let me explain: in the picture below, the toes of the parts look towards each other because here a single lower part was used for both soles, and we made our own for each foot (in 99% of people, the right and left feet are different in shape), so that the slippers are more comfortable . So here it doesn’t matter how to put it, but with us, if we put it the same way, the right and left parts will simply change places after turning the slippers on the face, but we don’t need this.

8. Pin the overlay pieces together with pins.

9. With an indent from the edge of the felt (!) In 0.6 cm, stitch the parts in pairs to each other around the entire perimeter with the usual straight seam. Remove the needles as they approach the sewing machine needle. Set aside the stitched details for now.

10. Fold both tops of the knitted slippers in half, right side up. Pin their back vertical raw edges together as shown in the image below.

11. Sew the backs on the machine vertically with an indent from the edge of 1.3 cm. Do not forget to remove the pins in advance so that they do not fall under the needle of the machine.

Keep your toes warm this winter with 10 original slipper ideas you can make yourself.

1. Slippers-Kittens

Your old slippers, two pairs of scissors (one for fabric, the other for paper), glue, fabric paint (you can take batik-acrylic for fabric), a piece of felt, a pen or pencil and a couple of sheets of paper.

1. The first thing you will start decorating your slippers with is to attach a sheet of paper to one slipper from a pair and circle its outline with a pen. Then, on paper, draw a cat's head along the slipper's office and cut it out. After that, attach the template to the felt and cut out the same figure on it.
2. Next, draw a cat's face on the felt and leave it to dry.
3. When you make sure that everything is dry, you can glue the muzzle on the slippers. Use as much glue as you need to be sure the muzzles are glued on. Press them down with your hand. Well, here are the slippers ready.

2. How to sew house slippers from a sweater

Here is a very economical and creative way to use an old unnecessary sweater and sew cozy slippers-boots.

3. How to sew home slippers

Here you have to work a little on a typewriter, but the method is also quite simple. For these slippers you will need an old sweater, scissors, double-sided tape, crayon or pencil, strong shoe insoles or a large piece of thick fabric and a sewing machine.
Step 1. As in the case above, we circle the foot on paper, and cut out two parts for one slipper and two for the other on thick fabric.
Step 2 We apply the template to the sweater and circle it, but leave 3-4 centimeters for the walls of the slips. Cut out.
Step 3 We apply to the parts of the sole cut out of the sweater, one from below, the other from above, and sew them with a machine.
Step 4 We cut off the rug from the sleeve, and form a tongue out of it, sew both halves, do the same with the other.
Step 5 We sew all parts, that is, we sew the front part to the tongue, and we cut the back part into three parts to the sole and sew them together.
Step 6 The final stage for beauty. Cut off the bottom of the sweater about 3 cm wide strip, as long as part of the slipper from the tongue. We stick adhesive tape to it and sculpt it on slippers. Slippers are ready.

4. How to make fabric slippers

Very beautiful slippers, but require much more time than the first three. To make them, you need fabric and a sewing machine.

5. Towel slippers

New life for old things: 10 warm and cozy things from an old sweater - 2

A familiar situation - the closet is packed to capacity, there is nowhere even to shove socks, but a pair of jeans, a dimensionless cozy sweatshirt, two simple sweaters and a T-shirt bought a hundred years ago are worn from all this?

Because no matter how beautiful and elegant a thing is, we will always be drawn to coziness and comfort.

And that is why some new clothes after a single release "into the light" lie with us for years untouched, and some are worn out to holes. Then they go into the category of “homemade”, patched up, cut off and worn a little more ... And then more or less “live” patches are cut out of them and used as potholders, kitchen towels, etc. ... Conclusion - with your favorite little thing as with It is very, very difficult to part with a loved one! Therefore, I suggest revisiting your wardrobe for "no five minutes of discarded items" and giving them a second chance! After all, how many useful, beautiful and original things can be made from the same sweater!

1. Bag

Unusual knitted bags can be easily made even if you don't like knitting! After all, you can use a ready-made knitting of an unnecessary sweater - just cut out two pieces of the desired size and shape, sew, fasten the handles, make an inner cover with pockets for your favorite little things and the new thing is ready!

Soft and cozy winter bag is very easy to make.

We cut out, cutting out the sleeves a little more than the armhole and the neck - as shown in the figure

Lay the material so that the side seams of the sweater meet at the front. Pin the bottoms of the sweater together and sew in a straight line to bring the two sides together. We make a hem on the top and on the handles. Turn out the bag. Ready!

To make the bag not look like a shopping bag, decorate the bag.

2. Warm socks

Such bright and warm socks are sewn in one sitting from the sleeves of an old sweater. You only need to cut a piece of the sleeve to the desired length and carefully hem it in place of the cut so that the edge does not fray.

The most affordable way to use an old sweater. Cut off the sleeves and you're done. It can be worn both under clothing and shoes, and over it.

These socks look very stylish under high boots or on top of ankle boots.

3. Warm socks

As you already understood, it is not necessary to be able to knit in order to have warm woolen socks at home. Of course you can buy them..
But a real needlewoman is used to correcting the imperfections of life on her own, with the help of improvised means. Warm socks can be easily made from the sleeves of an old sweater.

And as a rule, there is an old sweater that no one wears anymore, as a rule, in every house.

Let's add to it scissors, safety pins, yarn and a large needle - "gypsy".

Take measurements.

Resolutely, not sparing the sweater, we cut out the insoles of future slippers according to the template. The main thing - do not touch the sleeves yet.
Because we will need them for the top of the slippers.

Cut off the desired length.
Now we fasten the sole and the "shaft" with safety pins so that our parts do not move when sewing.

Now we need a large needle. With its help, we sew the “sole” with the upper part with an overcast seam. For beauty, we add a similar seam along the upper edge of the slippers.

Slippers-uggs:

The patterned sleeves of an old sweater will help you make another cute winter socks for cold days.

How to make socks from an old sweater

4. Scarf - snood
You can easily and quickly sew a snood with your own hands from an old sweater. For this we need:

2 unnecessary sweaters (you can take scarves)
scissors
sewing machine

Everything is done very simply:

Cut off the bottom of each sweater. Choose the width as you wish, what you want to get snood.

Cut one side of each piece to make long strips.
Now sew all sides together, leaving a small opening.

Turn the snood out through the remaining gap and sew it to the end.

Another option on how to make an original designer scarf with your own hands.

You will need:

An old acrylic yarn sweater (try to avoid 100% cotton materials, because they are not suitable for this purpose due to their properties)
Scissors
Sewing machine or thread with a simple sewing needle
Measuring tape

Step 1. Start by cutting the sweater just below the sleeve line on all sides.
Advice: The original size of the sweater will determine the dimensions of the finished scarf. The larger the sweater, the larger scarf you can make.

Step 2: Finishing the Edges
Use a sewing machine or hand-hem the edges with beautiful decorative stitches.

Step 3. Cut out pieces from the sweater and form blanks for the future scarf

Step 4. We finish the alteration of clothes with our own hands.
The scarf is almost ready. Now sew all the pieces of the sweater together. At the ends, you can leave small shreds, cutting the edges with scissors into stripes. This way you can create the effect of a real scarf.

5. Bib

The obvious thing that can be made from a sweater is a shirtfront by simply cutting off the neck. If you know how to knit, then you can tie a shirt-front around the edge. Having made a hat from the same sweater and decorated with beads, you will get a stylish set.

6. Socks-slippers

If you washed a sweater and it ran down to a child's size, then you should not be upset. Armed with scissors and a needle, you can make beautiful new house slippers that will keep you warm in winter.

As the proverb says: keep your feet warm. These stylish slippers are the perfect solution for those who can't stand cold floors.

What we need:

pullover
pattern paper
scissors
sewing thread
needle
hook
Knitting thread

Make patterns for the leg.
Patterns should consist of 2 parts for each leg - one solid, the second with a hole in the middle.

Cut tailored to the seams.
Sew together, turn inside out and crochet the edge.

7. Soft slippers

Excellent warm soft slippers from an old sweater will warm your feet

You will need

unnecessary sweater
felt (20 cm x 30 cm) or ready-made insoles
A4 cardboard sheet
pencil
scissors
double-sided adhesive tape
needles and threads
tailor's chalk
sewing machine

Progress:

Cheaper and easier to buy ready-made insoles. But, if anything, they can easily be made from felt. First, trace the outlines of the legs on the cardboard.

Then cut out the template from cardboard.

Lay out the template on felt or other dense material (leather, thick batting, etc.), trace and cut out.

You will need 4 identical insoles.

Next up is the sweater! Transfer the patterns to the knitted fabric, but do not forget to indent approximately 3 cm.
Circle 2 identical contours, then cut along the lines.

Stick the double-sided tape to the first insole and apply it to the right side of the fabric.

Do the same with the other insole and place it on the wrong side of the fabric. It is necessary that the edges of the felt insoles match as much as possible.

Now you need to sew the insoles and fabric. You can do this manually, although the sewing machine will still save your nerves and time!

Let's take care of the top of the slippers! Measure about 13 cm from the cuff of the sleeve and cut off.

Sew cuffs and round off the opposite side of the part, as shown in the figure.

Now you have a piece of knitted fabric with insoles sewn on both sides and a cap. And there should be two such blanks!
So finish it and start the most interesting thing - stitching fragments!

Attach the cap, which is the future top of the slipper, on the front side over the sewn insole. Its top should coincide with the center of the rounded side. Sew the details at this point.

Sew both parts in a circle, while moving from left to right and evenly picking up excess fabric around the insoles into the line. Thanks to the stitches already made, this will be easy to do.

Turn the resulting design inside out so that all the seams remain inside the slipper, and make two cuts on both sides of the heel. It is necessary that the incisions end a few millimeters from the insole.

To make the heels of slippers, you need to form them from these three pieces of fabric.

Then sew the part - you should get two vertical seams. Then sew the part - you should get two vertical seams.

Finally - the lapels of slippers! Cut off the bottom hem of the sweater. Wrap the raw edge so that the width of the strip is approximately 5 cm. Cut it into 2 parts. Attach the tape as shown in the photo.

Wrap the resulting knitted tape around the slipper, glue and secure with stitches. Do the same with the second tape. Made!

These are such cute house slippers!

Three new items from one old sweater

If you have an old sweater lying around in your closet that has long gone out of fashion or you just got tired of it, then do not rush to throw it away. Resourceful craftswoman Olga Volkova claims that three stylish new things can be made from one old sweater.

First, you can make an original and stylish knitted bag. Such unusual bags have become very fashionable this season.

Secondly, a very fashionable and original decor for a cup can be made from the neck of a sweater, which will give the interior more coziness, warmth and comfort. Moreover, in this case it is better to use a sweater with an ornament. If the sweater is plain, then it will be possible to decorate the cup with the help of embroidery, and beads, and buttons, and bows - as your imagination inspires you.
When you make such a decor, do not forget to step back about 1.5 cm from the edge of the cup so that it is convenient to drink.

Thirdly, from the sleeves of an old sweater, you can make stylish, but funny and warm knitted homemade boots. In this case, the cuffs of the sleeve will be at the top, and where the sleeve was sewn to the base of the sweater, there will be a sole. as a sole, you can use ready-made insoles or cut them out of felt and felt.

Do not look at the fact that your favorite sweater is already old. He's still wow!
The opportunity to give him a second life is in your hands. I really hope that at least one thing from this top was useful to you!
According to treasurebox.ru, lady-antikrizis.ru, www..com

http://www.site/users/elenaslava/post378402373/

http://marrietta.ru/post194610562/?upd

Do not rush to throw away an old but dear sweater. If a thing is leaky, this does not mean at all that it has no place in your home. We can easily remake it into something new. Thus, your favorite thing will serve you faithfully for several more years. And best of all, it will look very cool!

From an old sweater, we will sew warm, soft and very cozy homemade ones with our own hands. We take the stencil shown in the photo as a basis. Make the length of the insole according to your foot (measure it with a ruler from the thumb to the end of the heel).

Insoles can also be taken ready-made, if any. The tighter they are, the longer the slippers will last.

We make a pattern. Then we sew the insole along the edge. This is easier to do on a typewriter, but you can sew by hand if you don't have one. The sole is ready, proceed to the upper part. We sew the top layer (the one that is prettier) with the lining (the one that is softer) And now carefully (from the wrong side) we connect the top with the sole.

A familiar situation: the closet is packed to capacity, there’s nowhere even to shove socks, and a pair of jeans, a dimensionless cozy sweatshirt, two simple sweaters and a T-shirt bought a hundred years ago are worn from all this? Because no matter how beautiful and elegant a thing is, we will always be drawn to coziness and comfort.

And that is why some new clothes after a single release "into the light" lie with us for years untouched, and some are worn out to holes. Then they pass into the category of “homemade”, are patched up, cut off and worn a little more ... And then more or less “live” patches are cut out of them and used as potholders, kitchen towels, etc. ... Conclusion: with a favorite little thing, like parting with a loved one is very, very difficult! Therefore, we suggest reviewing your wardrobe for “without five minutes of thrown things” and give them a second chance! After all, how many useful, beautiful and original things can be made from the same sweater!

1. Bag

A soft and cozy winter bag is very easy to make:

We cut out, cutting out the sleeves a little more than the armhole and the neck, as shown in the figure:

To make the bag not look like a shopping bag, decorate the bag.

2. Warm socks

The most affordable way to use an old sweater. Cut off the sleeves and you're done. It can be worn both under clothing and shoes, and over it.

These socks look very stylish under high boots or on top of ankle boots.

3. Warm socks

As you already understood, it is not necessary to be able to knit in order to have warm woolen socks at home. You can, of course, buy them ... But a real needlewoman is used to correcting the imperfections of life on her own, with the help of improvised means. Warm socks can be easily made from the sleeves of an old sweater.

And as a rule, there is an old sweater that no one wears anymore, as a rule, in every house.

Let's add to it scissors, safety pins, yarn and a large needle - "gypsy".

Take measurements.

Resolutely, not sparing the sweater, we cut out the insoles of future slippers according to the template. Most importantly, do not touch the sleeves yet. Because we will need them for the top of the slippers.

Cut off the desired length. Now we fasten the sole and the "shaft" with safety pins so that our parts do not move when sewing.

Now we need a large needle. With its help, we sew the “sole” with the upper part with an overcast seam. For beauty, we add a similar seam along the upper edge of the slippers.