How to make a ball of thread strong. How to make balls from threads and pva glue with your own hands

Families usually enjoy the process of decorating their home. Creating unique and beautiful things with your own hands allows you to make your corner one of the most charming. This method also gives you the opportunity to feel like a designer. Ways a large number of. Nowadays, such a trend as hand-made is popular, with the help of which they are made various crafts with his own hand. One such variation is a ball of thread, which can be used to decorate not only rooms, but also christmas tree, veranda and even courtyard. This decision will allow you to stand out among others. With the help of balls it is possible to do interesting compositions, and if you insert a light bulb inside the ball, you get an exclusive lamp. You can even make a lampshade out of these balls.

Such products are very simple to make, but require enough free time, as well as desire and patience. After all, no decoration can be made in 5 minutes, so you will have to sit at the table for a while and try to make a ball of thread. But there are also advantages. One of them is that you don’t need to spend a lot of money on making jewelry, and you can create something unique and inimitable with your own hands.

New Year's version

When the days of preparation for the New Year holidays come, you want not only to make the atmosphere magical, but also to decorate your home and traditional tree with something beautiful. Now buy interesting Christmas decorations It’s not cheap, so you can make the decoration yourself. This master class will help you figure out how to make New Year's ball that will make the holiday memorable. After all new year holidays– this is not only champagne and gifts, but also preparation.

What we need to prepare:

• simple balloon;
• threads, preferably not synthetic, the color depends on preference, and for an elegant ball you need thinner threads;
• PVA glue - no other, only this one.

Let's take a balloon and inflate it to the size we want it to be. Inflate the round balloon to the desired size. Now take the glue, which we dilute in half with water. But if there are doubts about the quality of the glue, it is better to dilute it one to two, where there will be more glue. We take the thread and put it in the resulting adhesive liquid. After a while, we pull out the thread and begin to wrap it around the ball crosswise, usually this happens chaotically. When we get the desired web, we leave our ball to dry. This can last from half a day to a day. It all depends on the number of threads on the ball. When everything is dry and the PVA does not stick, burst the ball inside and carefully remove it. Our craft is ready, all that remains is to attach the ribbon to the ball and hang it on the Christmas tree or in another designated place.

Ball with candy

When the question arises of what to give to your to a loved one On holidays, and especially on New Year's, sometimes this question leads many to a dead end. I would like to give something special, but not everyone has the money for something expensive. Therefore, the most the best option There will be a gift made with your own hand. In this case, you can make a ball of thread with candies inside, which will suit those who have a sweet tooth. There is no doubt that everyone will undoubtedly like such surprises. When creating such a ball, you need to think about what threads to use. It is best to use natural ones, and the color depends on preference.

What we need to create such a ball:

• cotton threads;
• round balloon;
• glue, namely PVA;
• water;
• the cream is greasy, better for hands;
• ribbon;
• non-natural Christmas tree branch;
• cones;
• green floral wire;
• rhinestones or beads;
• candies.

Inflating the balloon the right size and tie it in a knot, there is no need to use thread, as it may come undone. Next we need to lubricate the ball with cream so that it is convenient to detach it from the threads. Now we wrap the ball with threads, but leave some space near the knot for the candies to pass through. We dilute the glue with water one to one and thoroughly lubricate the entire ball. At the same time, make sure that the threads are well saturated with glue. We leave the ball to dry, this can last about a day. After the glue has dried, you need to burst the ball and carefully remove it. Let's look at the photo to see how it should look.

We need to decorate the resulting ball, but first we put sweets inside it. Can be used for decoration various materials. In our case, we attach a Christmas tree branch with glue, then glue the pine cones onto it. We glue beads or rhinestones onto the needles themselves, and then we make a buttonhole from ribbon; in addition, you can use a narrow ribbon to decorate the ball under a spruce branch in the form of a banner. Our candy ball is ready.

Video on the topic of the article

This article presents videos with which you can learn how to make balls of thread with your own hands.

To create something original with your own hands, for example, a lampshade for a lamp or a decoration for a holiday, you don’t need to stock up on expensive materials. This can be ordinary threads and glue, which can be found in any home. Knowing how to make a ball from thread and glue, you can build a variety of original elements decor that will decorate not only the interior, but also any celebration. If you don’t know about this technique yet, read the instructions below and feel free to start creating.

DIY crafts from threads and glue

It’s good to make such crafts with children, because making them is not difficult. Finished goods can act as DIY decoration or be part of more complex compositions, for example, a snowman or a cockerel. In addition, it is not necessary to make a spherical-shaped product - with the help of threads and glue it is easy to build even a heart for Valentine's Day. The decor can even look like feathers, Christmas trees or snowflakes. First you need to stock up on materials:

1. A thread. Important condition selection of this material - it should have a slightly loose structure so that the glue can easily saturate it.
2. A common balloon sold in stationery stores. For large crafts It is recommended to inflate it no more than 15 cm, and for New Year’s decorations it is better to use a fingertip purchased at a pharmacy with a diameter of up to 6-8 cm.
3. Glue. The main factor influencing the outcome of the work. PVA has proven itself well for such crafts. Office glue or a mixture based on PVA, water and corn starch in a ratio of 1.5:0.25:0.5 is also used - the main thing is that the mixture has the consistency of sour cream.

In addition to the 3 main elements for crafts, you will need:

• scissors;
• fatty cream or Vaseline;
• Bowl;
• "Gypsy" needle.

New Year's balls made of threads

Don’t rush to buy Christmas tree decorations in the store - try to build them yourself. It will be more original decoration Christmas tree, which will only emphasize the family atmosphere of the holiday, especially if you do it together. In addition to the main elements, stock up on all kinds of beads, beads, feathers or ribbons for decoration ready-made crafts. Next, proceed to follow the instructions on how to make balls of thread and glue:

1. Inflate the balloon to the desired size and tie the end. Lubricate thick cream or Vaseline.
2. Next, either soak the thread in the adhesive composition, or pierce the container with glue at the very bottom with a needle and push it through the hole.
3. Pull it and gradually wrap it around the inflated balloon.
4. Secure the end of the thread under the already stretched one.
5. Leave to dry for at least 1 day.
6. Then gently deflate the balloons.
7. Decorate the resulting toys with beads, spruce twig or bows. To give the effect of falling snow, soak the product in glue and then roll it in semolina or powdered sugar.

DIY surprise ball

If you wind more threads, the product will be almost opaque, so you can put sweets or other small gifts inside. You will need the same materials, only for larger immersed elements you will need a “surprise loader” - a medium-diameter tube made of thick cardboard. If you manage to find one, then start making crafts:

1. Prepare the adhesive and pull the thread through it.
2. Pull a balloon onto one end of the tube and inflate it.
3. Carefully load your intended surprise. Remove the base of the ball from the tube and tie it.
4. Wrap with glue-soaked thread as you wish - whether the gift is transparent or you want to hide the surprise.
5. Hang the product and leave to dry.
6. Deflate the balloon.
7. The surprise is ready - decorate it with any accessories depending on the holiday.

Balls of thread for a wedding

Wedding celebration- this is also a holiday, the decoration of which can be such thread products. Manufacturing instructions wedding decorations:

1. Inflate all the balloons at once.
2. Hang it on some kind of bar.
3. Apply Vaseline.
4. Take pure PVA or mixed, as indicated above, with starch and water.
5. Pierce the tube of glue at the bottom with a needle or soak the thread in a bowl of adhesive composition.
6. Wrap each ball so that the threads intersect.
7. Leave the products to dry.
8. After drying, deflate the balloons and decorate the decorations with fresh flowers, rhinestones, ribbons, beads or LED garlands.

Of the most simple threads and PVA glue you can make very interesting gift souvenirs and. Even a child of three years old can cope with this task. The principle of all crafts is the same: lubricate the threads with glue and give them shape, and then let them dry completely.

Ball of thread and glue

We will make an original New Year's decoration from Iris threads, PVA glue and a balloon. You will also need scissors and a large needle. Now let's consider step by step instructions how to make a ball of thread and glue.

1. Inflate the balloon. Practice shows that a diameter of 5-10 cm is quite sufficient.
2. Next we thread the needle. We pierce the bottle of glue right through. This way our thread will be immediately ready for use. Select a needle so that it is slightly thicker than the thread.
3. Now we begin to wrap the ball with thread soaked in glue.
4. Wrap in different directions, try to avoid gaps.
5. Once you have evenly distributed the thread over the surface, you can cut it. We tuck the tip under the remaining layers.
6. Let the workpiece dry overnight.
7. A completely dried ball can simply burst or be carefully untied. The air will begin to escape and the result will be only a frame of their threads in the form of a Christmas tree decoration.
8. All that remains is to tie the ribbon and hang the decoration on the tree.

I am a decorative designer and sometimes I get interesting orders. This time, when decorating the wedding, the bride wanted to decorate the ceiling of the hall with thread balls.

For people like me, fans of the Pinterest service, there is a special article about Pinterest fails - like it can be beautiful on the Internet in pictures and then the user is faced with reality:

In our case this was true.
The first photo is Pinterest, the second is reality :)

And a little more reality:


That is, before the first perfect ball, we had 4 attempts to choose the glue, application method, and type of winding.

So I propose a proven system:

1) Balls are most convenient to take round shape with an elastic band at the end. They are sold in any children's stores or in the holiday sections of supermarkets. All balls are reusable. It's a matter of saving. If you are making only one balloon, you can simply use a bare balloon and then deflate or pop it.

In our case, we needed to make 30 balls, so I bought 7 bases and had a cycle of 7 pieces.


2) Each ball is wrapped in cling film to prevent the rubber from drying out from glue, etc.
We tie the end that is inflated with a thread and also wrap it tightly with film, so as not to eat the glue later, we leave open only the back pipe, which we will hold.

Lubricate the film over the ball sunflower oil or johnsons baby oil. Why do this?

In fact, even if you don’t smear, the ball will still come away from the film, but when you wind the threads, they leave strips of glue on the cellophane. If you leave it as is, the glue dries like a film between the threads and needs to be cut out (see photo of the blue ball at the beginning of the post). If there is oil, then it seems to roll off and remain on the film as just balls.


3) Glue!!!
Glue should be used PVA grade M (furniture). That is, ordinary office glue is not suitable (PVA-K), it does not hold at all. Glue should be purchased at the rate of 1 liter for 7-10 balls with a diameter of 30 cm. It took me about 3 liters for 32 balls.
PVA glue should not be taken as an emulsion, although it is more expensive, it dries like epoxy, surrounding each thread with a transparent cocoon, but simply construction PVA for wood, etc.

The successful glue in the photo with a pink label, it was bought at Leroy-Merlin for 23 UAH - 1 liter.

We prepare the glue in portions, adding water and starch to make the ball harder. I prepared about 300 ml in a container - a couple of tablespoons of starch and 20-30 ml of water so that the starch was kneaded. Make the solution by eye - the glue should not end up much more liquid than before dilution.

THREAD!!
As it turned out, the question is not fundamental. I took large acrylic yarn, 300 meters per 100 grams, the blue one is natural cotton-bamboo. Both natural and artificial threads adhered well, provided they were well impregnated.

4) Master classes usually involve two people - one person soaks the threads in a bowl (puts glue into the threads), and the second one winds them.
We didn't do it that way, but made a system out of a bottle. We made two holes in a half-liter bottle - at the bottom and in the cork. The thread was threaded into a dry bottle with a needle from bottom to top. The hole was made according to the size of the thread so that it fits tightly, then the glue does not spill out back. You can make the hole in the cork a little wider so that all the glue does not wring out and the thread comes out wet.
So, when each thread passed through the entire length of the bottle from bottom to top and, being savored, was pressed out a little at the exit, no assistant was needed. If the thread ran out, then I made a knot in advance before entering the bottle and connected them.

5) The work is dirty, I did everything on the balcony. She laid oilcloth on the floor and put on a raincoat, but backwards. She shook the bottle with her feet and shook it.

First you make a circle around the ball and tie it in a knot, then wind it randomly.

It’s convenient to wind if you pull a long piece (one and a half to two meters) of glue out of the bottle and twist it around the ball, distributing the threads. Then pull out the next one. Small pieces are less neat.

6) The balls were dried on the balcony. It was hot, so they dried in about half a day. I shook early in the morning and in the evening - at night.




7) When they were completely dry, I found an inflator, untied it and deflated. The film and ball were taken out from a large sector nearby.


8) Gradually a hill like this grew up.

We used balloons to decorate the ceiling at a wedding, photo report here.

Balls of thread beautiful, airy and will decorate any interior. Moreover, this method can be used to make almost any three-dimensional object, for example, lampshade, vases, animal figurines, etc.

We will need :

Balloon;

PVA glue;

Thick cotton threads;

Cling film;

Petrolatum;

A plastic cup.

To balls turned out smooth and dense, you need to be very careful about the quality of the PVA glue and threads. I used this glue from Tury - Profi PVA glue - I recommend it. Don't take PVA glue from the office supply department. Many of them do not stick well to paper.

The threads are needed so that their composition is mainly cotton. This is a more porous material and is better saturated with glue. Under no circumstances use completely synthetic threads; they will not be well saturated with glue, and your ball will be soft and will not hold its shape well.

I bought Knitting thread"Peony" St. Petersburg factory named after. Kirov. Their composition: 70% cotton, 30% viscose. They are dense, but quite voluminous and take a lot of glue (this is good for holding their shape). My second batch was made from floss from the same mill. Balls Of the "Peony" threads, I liked them better.

We take a regular rubber ball and inflate it to the size we need. I had a conveyor belt, so I inflated 6-7 pieces at once. Tighten the pimp thoroughly so that the ball does not deflate when drying, otherwise the whole structure will become warped :)

Wrap the inflated ball in cling film. I left the tail uncovered to make it easier to blow off the balloons later. Yes, I didn’t pierce them, but blew them away, because if you do everything carefully, the rubber ball can serve us more than once or twice :)

Then we take Vaseline and smear the ball wrapped in cling film. This will prevent the threads from sticking to the ball and will not damage their shape. Yes, in the photo it’s Vaseline :) I took the photo in the process, so my hands were dirty, the camera in my hands was shaking and jumping :)

Now important point. How to prepare thread for wrapping. To prevent the thread from getting tangled and not being too wet from the glue, it must be passed through a cup of glue. Creating the first ball of thread, I put the threads in a bowl of glue, that is, I simply dipped them there. The threads were too wet, constantly tangled and curled into knots. And, of course, there was glue all around :) There was more glue on the hands than on the threads :) So I took a plastic disposable cup, with an awl, I made two holes on both sides (closer to the bottom, but not quite low) and passed a thread through them. Then I poured PVA glue so that it covered the thread. The photo shows how the thread passes through the glass. This system allows the thread not to get tangled and to absorb as much glue as needed. I placed the ball itself in a large mug so that it wouldn’t jump around on the table :)

I simply pulled the thread through the cup of glue, gradually wrapping it around the ball.

This is the design. Important element- a good series or movie :)

The ball is wrapped. Wrap evenly without leaving large holes.

I hung all the blanks in the bathroom to dry. I dried it all night, although you can remove it earlier - after 3-4 hours.

After final drying, I deflated the rubber ball and pulled it out along with the film. These are the thread cocoons we got.