A simple crochet knitted hat. Crocheted wide-brimmed summer hats, diagrams are attached

A knitted openwork hat is a stylish and elegant addition to women's summer outfits. In such an attractive and romantic accessory, a woman will look mysterious and original. Hats knitted independently look especially elegant. Look at the proposed summer hats for women with a crochet pattern and description in this article, choose the right model for yourself and get to work.

Summer knitted hat for women

We start knitting a hat from the crown with single crochet stitches (CC1H). We work in a circle, moving to the fields.

For them, a diagram is presented depicting the beginning and end of each circular row. Using the description, the model can be knitted in any of the calculated sizes.

Sizes: S-M; L-XL.

Head circumference: 54-56; 58-60cm.

We will need:

• yarn, 100% cotton, 50g per 100m - 150; 200g;
• hook No3.

Density: 22 CC1H for 11 rows, you get 10cm by 10cm.

Description

Note:

• we start from the crown and go around, knitting columns with one crochet (CC1H). The pattern for the fields - see diagram A.1, the transition from one row to another - see diagram A.2;
• decreases: tie 2 CC1H with a common top;
• increments: tie 2 CC1H from one p. of the base.

We collect a chain of 5 air loops (VP) and close them into a ring with a connecting column (SS). Next, knitting is performed using the description:

• 1cr.r.: 11 sts with 1H in the ring;
• 2 cr. R.: 2 sts with 1H in each loop of the row;
• 3 cr. p .: * 2 sts with 1H in the next / first st with 1H, 1 st with 1H in the next. stlb with 1H * - from * to * repeat for the entire row. Total 33 CC1H;
• 4 cr. R.: * 2 sts with 1H in the next / first st. with 1 nak., 1 CC1H in the next. 2 СС1Н * - from * to * repeat for the entire row. Total 44 CC1H;
• 5 cr. R.: * 2 tbsp. with 1 acc. to the next/first post. s / 1n, 1 tbsp. with 1 acc. in the next 3 art. with 1 stitch, * - from * to * repeat for the entire row. Total 55 CC1H.

We continue knitting, using these instructions. We make increases in each row, we finish at 9p. In work 99 CC1H.

Further knitting of summer hats for women will be prescribed separately for two sizes.

Summer hat size S-M

10 cr. R.: * 2 tbsp. with 1 acc. in the next / first art. with 1 nak., 1 tbsp. with 1 acc. in the next 10 st. with 1 stitch, * - from * to * repeat for the entire row. Total 108 Art. with 1 acc.

We perform further knitting of a hat for women in a circle, knitting CC1H in each p. Having received 16 cm, in the last kr. R. subtract 3 columns at regular intervals. 105 pillars remain. s / 1n.
We knit the fields according to the images of scheme A.1. At the same time, we repeat the rapport of the pattern pattern 15 times. We finish knitting in 9 cr. R. scheme. By this time, we should have 135 b/n stlb. We break the thread, fasten and carefully hide the end.

Summer hat size L-XL

10 cr. R.: * 2 pillar. s / 1 in the next / first CC1H, 1 column. s / 1n in the next. 8 pillar. s / 1n * - from * to * repeat for the entire row. Total 110 СС1Н;

11 cr. R.: 1 column. s / 1n in the first 2 columns. s / 1n, * 2 SS1N in the next / first column. s / 1n, 1 column. s / 1n in the next. 17 СС1Н * - from * to * repeat for the entire row. Total 116 pillar. s / 1n.

Then we knit CC1H in the round until we get 17cm in height (measured from the first row). In the last row, we decrease at regular intervals 4 CC1H. We continue knitting hats for women according to cx. depicting a pattern for fields.

Rapport is repeated 6 times in a circular row. Having completed the last, 9th p., We get 144 stlb b / n. We break the thread, fasten and carefully hide the end.

Summer hat “Sea Dreams”: video MK

Summer hat with wide brim

We will need:

• fine cotton yarn - 200g;
• hook No1.

Description

We knit a hat with a wide brim for women according to the scheme, placing the lifting loops along the edge of the fan strip.

The symbols of the given scheme are standard. For beginner knitters on our website there is a detailed article with detailed illustrations on this topic.

The finished product must be starched and ironed.

• yarn containing 50% cotton, 50% polyacrylic (50g per 80m), melange gray-turquoise - 150g;
• yarn containing 78% cotton, 22% polyester (50g per 100m), blue - 100g;
• hook No3,5 and No4.

We will need:

• motive "Fan": performed according to the instructions of the scheme.

The designations for this scheme, as well as for the previous one, are standard, you can clarify them in the same article on our website.

The figure of the diagram fully shows the 12th circle. R. 13th p. and subsequent ones contain only a fragment of the motif. We use it for knitting on all cr. R. We finish each row with one connection. stlb in the initial air. P.

In a schematic representation of 19 p. rapport is shown, it should be repeated on all loops. The transition between rows is carried out according to the instructions of the scheme.

We knit circular rows of hats for women containing “Fan” motifs with blue yarn, for the remaining rows we use gray-turquoise melange. The last SS of the last cr. R. we knit with a gray-turquoise melange with a blue thread and behind each kr. R. with blue yarn we attach a gray-turquoise thread to the 3rd VP of the last "Fan".

From the 1st cr. R. on the 19th cr. R. knit once, then repeat from 16 cr. R. 19 cr. p., performing additions - see description below.

Important note

For the “Fan” motif, all rows must be knitted in the same direction.

Density: 20p. original r. (without the motive "Fan") for 12 kr. R. it will be 10cm by 10cm.

Description

We knit a chain of 8 VPs with gray-turquoise melange, close it in a ring 1 SS. We carry out further knitting according to the scheme, making additions.

Having knitted 12 kr. R. (this is 10cm), we completed 29 rapports and have 116p. At this point, the hat is tied to the middle.

From 13 kr. 22 kr. R. knit evenly, without additions.
Next, for the fields, we perform single crochet increases - see the description below. All added loops are included in the pattern.

23 cr. R.: * from each 4th loop of the base we knit 2 sts without a crochet * - from * to * repeat 28 times. We get 144p .;

27 cr. R.: * from each 4th loop of the base we knit 2 single crochets * - from * to * repeat 36 times. We get 180p .;

31 cr. R.: * from each 4th loop of the base we knit 2 sts without a crochet * - from * to * we repeat 44 times. We get 224p .;

35 cr. R.: [* from each 6th p. of the base we knit 2 sts of b / n * - from * to * repeat 8 times, from each 8th p. repeat three times. We get 260p., Which is equal to 65 rapports.

Having knitted up to 30 cm (this is 36 kr. R.), we complete the work.

Crocheted raffia hat “Vasilisa”: video MK

Selection of schemes

Summer hats crocheted with flowers - a lot of patterns, ideas and mk

Here are collected schemes of beautiful openwork hats and color schemes for them. There is also material on how to starch and dry these hats.

Threads - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
I tied a strip of sirloin mesh around the circumference of my head (4 rows) - in a circle - such a bandage turned out
Then she attached the thread and knitted the strip on top with a fillet. Tried on my daughter. The holes were large. I tied them with fans, but at the same time I corrected the pattern so that it did not expand, but vice versa
Fields:
When moving to the fields, I tied 1 row of ssn (I always knit 2-3 rows of sbn, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did it intentionally so that the hat was freer at sea)
then 3 rows of arches from 5 c. P.
And then fans according to your favorite scheme

Then she tied a double ring of regilin sbn, then with a crustacean step.

Hat “Little Lady”

schematic and description of the side part

The scheme of the bottom and crown on the exhaust gas 49-50 cm.

My yarn

My knitted 13 rows of bottoms:

Up to 13 rows inclusive for all sizes we knit the same way.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the column, it is advisable to use the "deep" sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to move when we knit with a crown.
* * *
Starting from the 15th row for all sizes, we knit according to the scheme. Rows 15-20 are repeated two more times.
From the 15-20th they differ only in the last row. Instead of CH, I knitted it with RLS.
33-38 rows are also knitted according to the scheme.
38th row - RLS in each column.
The fields start from the 39th row.

We finish the TULIA and insert the FIRST regelin equal to the circumference of the head. I did one vein. This is where we complete the work of the RLS. We steam.

We knit FIELDS hats.
In the 39th row we make increases in every 3rd column,
In the 45th row - in every 4th, in the 51st - in every 5th.
The point is that in each row with increases, you need to add 56 CH (7 reports). That is, in the 39th 168/56 \u003d 3, in the 45th (168 + 56) / 56 \u003d 4, etc.

FORTIFICATION OF THE FIELDS.

After the last row of fields is connected, they need to be steamed well.
On a horizontal table surface, the fields should be in the shape of a flat circle.

We take the SECOND regilin (two veins at once) and tie it with RLS. The length of regilin is not measured in advance !!! Just trim off the excess.
We straighten the fields well.
Steaming!
We tie the same row of RLS again. And we tie the last row with a "crustacean step" through a column.
On the plane, the fields should still have the shape of a flat circle.
Once again, steam the fields with an iron through a damp cloth !!!.
To stiffen, I used SALVITOSE, which is used in felting.
Dried on a balloon.

DECORATION.
It must be made removable - on a pin or button.

Daisies are very easy to knit.
Dial a chain of 2 c. n. In the first of them, knit 8 half-columns and close in a circle in the 1st half-column.

When the whole chamomile is ready, tie each petal in succession with connecting posts. This will allow them to keep their shape and not curl up.

For the centers of daisies, we make small pompoms using an ordinary table fork.

We wind the thread on the teeth of the fork. Then we tie with an additional thread in the middle, remove from the fork and tighten the knot. Then fluff and trim. Sew to the middle of the chamomile.

Two daisies are small, and one is slightly larger. For her, the scheme is the same, only for the petals we collect not 7, but 9 c. P.

I made a decoration on a button fastener for bags.
We need a button and a knitted circle - this is what daisies will be sewn to:

Finished:

Attach button to hat

Scheme (only for petals):

Notation: the sketched points on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull out of the connected column (in order to make it easier to count the loops)

Blind (connecting) loop

I knit from Soso threads (50g = 240m) with an ordinary hook No. 1.5 (without a handle)

Step by step photo of the process:
1. In a sliding loop we knit 6 columns without a crochet

tighten the thread, close in a circle.

2. Capturing only the back half of the loops, we knit 11 columns without a crochet (1 stbn in the first half and 2 stbn in the next), we connect in a circle.

Half loops of the smaller circle will be needed for the upper petals.

3. We knit arches for the lower petals: we collect 5 air loops (in. p), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop with which the first arch was knitted.

4. We begin to knit the first lower petal: We collect 4 in. p. If you turn the knitting a little, the back (purl) jumpers will be visible

there is one loop on the hook (filled dot on the diagram), from the purl jumpers we pull out one loop at a time (4 sticks), we pull the last one from under the arch (extreme stick)

There should be 6 loops on the hook

5. We close the row: we grab the working thread and knit the loops on the hook in pairs (they grabbed the working thread, pulled it through 2 loops, grabbed the working thread, pulled it through the next 2 loops). We got the first row (connected column)

6. If you turn the knitting a little, the purl jumpers will be visible,

We knit one in. P.; we pull the loops from the wrong jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).

We close the row in pairs.

7. Next, we begin to cut the loops. In the sixth row, we start knitting with a blind loop (we insert the hook into the first jumper, grab the slave thread and pull it through the loop on the hook). from further jumpers we pull along the loop and the last one from under the arch

We close the row in pairs.

To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch

We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will turn out like this

To go to the upper petals, do 1 c. n insert the hook into the half loop of the small circle and knit a blind loop

On a small circle, 3 arches from 4 c. p (2 arches for the petals and 1 for the core)

8. We dial 5 in. n and knit the first connection. upper lobe column

First top petal:

two petals

We tie the upper petals with single crochets (I laid a thin wire along the contour to keep their shape better). The lower petals were tied with stbn (without wire). It turned out like this

We sew on beads, you can use small beads, and admire

Starching hats

1. We wash the cap in warm water (30-40 degrees). For washing white hats, I use a bleaching detergent, for colored ones - a powder for colored things.

2. Cooking starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and clear. We leave to cool.

3. Thoroughly starch the washed caps, wring out (without twisting), removing excess starch.

4. For drying hats, I use ordinary balloons, after inflating them to the desired size.

5. In the process of drying, I periodically give the fields the desired shape, I iron the fields of openwork caps through a layer of fabric.

Who would have thought that you can crochet a hat! Despite the imaginary complexity, even beginners can do it within one day. This is a primordially female accessory, so in our article we will consider various ways of knitting hats for girls and little girls who do not want to lag behind fashion.

Crochet photo of women's hats

Women's hats, knitted independently, look incredibly elegant. With such a headdress, you definitely will not go unnoticed. Look at the photos of finished works from professional craftsmen, perhaps very soon you will become the owner of such an original and cute hat.

Children's options are no less beautiful. Headdresses of little fashionistas can be decorated as you like. Pineapples, violets, roses, daisies and berries are ideal.

Master class and description of crochet hats

In childhood, many girls were jealous of their dolls, because they had such beautiful hats. Now you can make your dream come true and become the owner of a trendy and modern headdress.

Our master class is dedicated to the creation of a small children's model with improvised fields and a satin ribbon as an additional decoration. Openwork knitting makes the product airy and soft - ideal for the summer season.

To get started, choose the right thread color. You can take any patterns, but we suggest using ours if you do not yet have experience in knitting such products. Our description will help you understand if something is not clear.

The amount of yarn depends on the size. But, given that we are knitting a model for a girl, 100 g of cotton threads will be enough for you. To work, use hook number 2.

At the very beginning, you need to tie a simple chain of air loops. Attach it to the circle. The next row consists of three lifting loops and 30 columns with crochets. Then again you need to make a rise, and then knit, alternating two air loops and one double crochet. In the third row there will already be 44 double crochets.

Now take a look at the diagram. It shows how to knit further. Just follow the instructions and soon you will be able to enjoy the beautiful pattern. You should end up with a large dome with connected openwork petals. It must be carefully starched and turn the fields outward. Then you need to thread the satin ribbon into the lace and tie it with a beautiful bow. This completes the work, and you can already show off a brand new hat in front of your girlfriends.

We create a crochet hat with large fields: diagram and video

The hat in the previous master class has very small fields. If you like a model with large edges, you will have to use a wire frame. The fact is that starch will not overcome the severity of the knitted pattern, and the fields can quickly drop, and the product itself will lose its appearance.

For knitting, you will need white cotton yarn, at least 150 g. Work begins with 6 air loops, which are connected into a ring. Knit the next rows according to the pattern shown below.

Once the hat is ready, attach the wire frame to it, giving it the right shape. It would be desirable to additionally starch the product and put it on the form.

Another interesting lesson is offered on the video. You don't need a pattern to make this hat. Its author comes up with patterns on his own. Just listen to the recommendations and see how to knit a hat correctly. The beauty of the finished product can be enjoyed after a few hours of effortless work.

Photo of hats in retro style, with large brim and lace

Women's hat can be made in any shape. Recently, retro-style products have been in special demand. We offer several options for hats of this type.

In the summer, you need to carefully protect your face from the sun. A beautiful hat with large brim will help you with this. In it you will be like a real English lady at the Queen's reception.

The appearance of the hat, like many other accessories, was dictated not by fashion, but by practicality and necessity. In hot, sunny countries, it saved from the scorching heat and bright rays, thanks to the wide fields, and for the inhabitants of the north it served as protection from the cold. During the Middle Ages, the hat acquired a decorative purpose. There are many styles and forms of this headdress. Hats are decorated with fur, ribbons, feathers and precious stones. Over time, the height of the crown, the width and direction of the fields change, flowers appear and disappear as an ornament and decor element. In the 80s of the last century, hairstyles with a large fleece came into fashion for women, it was difficult to put on a headdress on such structures, and the popularity of hats was fading, in order to gain momentum again by the end of the 90s.

Hats are made from straw, felt and many other materials. A separate line are hats crocheted. Hats are knitted from pure woolen and mixed threads for cool autumn and winter. They are characterized by dense and embossed patterns and narrow margins. Hats can also be openwork, decorated with ribbons, rhinestones, beads or flowers, knitted with their light cotton threads and perfect for hot summers. It is about summer models that will be discussed in this article.

A characteristic feature of crochet hats is that they are knitted from the center of the bottom down.

Crocheted summer hats have another undoubted plus - yarn consumption. To create an openwork product, you will need approximately 100 - 200 g of cotton threads. Each needlewoman will have a few threads from a swimsuit or a summer sarafan that can be used to create a hat to match the existing outfit.

Romantic openwork hat decorated with ribbons and flowers.

You will need cotton yarn (100% cotton) peach color 200 g, hook number 2.

Close a chain of 10 air in a ring. loops.

1. First row. In the ring, knit * 4 tbsp. with a crochet, 2 air. loops * from * to * 5 times. In the first case, replace 1 tbsp. with a crochet for 3 air. lifting loops, finish row 1 with a connecting post.
2. Second row. Knit in each loop 1 tbsp. with a crochet. Start and end a row, like the previous one.
3. Third row. Knit through 1 loop of the previous row (1 double crochet + 2 air loops). Start and end in the same way as the previous two rows.
4. Fourth, sixth and eighth rows. Knit, like the second.
5. Fifth row. Knit through 1 loop of the previous row (4 stitches with a crochet + 2 air loops). In the first case, instead of 1 tbsp. with a crochet, knit 3 air. lifting loops. Finish with a connecting post.
6. Seventh row. knit similarly to the fifth, but instead of 2 air. loops between fours st. knit with a crochet 3.
7. Ninth row. 4 air. lifting loops, 3 tbsp. with 2 crochets with one top, * arch of 6 air. loops over 1 loop of the row below, 4 tbsp. with 2 crochets with one top *, knit from * to *, knit the last arch as 2 air. loops + 1 tbsp. with 2 crochets.
8. Tenth row. In each arch, knit 8 tbsp. without a crochet. Replace the first st. without a crochet for 1 air. lifting loop, finish row 1 with a connecting post.
9. Eleventh row. Knit in the fourth and fifth st. without a crochet of each arch 2 tbsp. with 2 crochets + 3 air. loops. The last arch of 3 air. loops replace with 1 air. loop + 1 half-column with a crochet.
10. Knit further according to the scheme, finish the hat by knitting 31 rows with pico.

Pass the tape through the last row of the sirloin net. Decorate with flowers if desired. The brim of the hat can be starched hard or soaked with PVA glue diluted 1:1 with water.

Summer cloche hat.

An elegant hat fits snugly to the head. The photo shows a white product of their cotton threads, while the fantasy of the needlewoman will definitely tell you the shade of yarn that is right for her.

1. First row. In a ring of 4 air. loops tie 10 tbsp. without a crochet. (can be replaced with an amigurumi ring).
2. Second row. In each loop, tie 2 tbsp. with a crochet with one base + 1 air. loop), replacing in the first case 1 tbsp. with a crochet for 3 air. lifting loops, finish row 1 air. loop and 1 connecting post.
3. Third row. In every st. with a crochet, knit 2 tbsp. with a crochet. In the first case, replace 1 tbsp. with a crochet for 3 air. lifting loops. Finish the row with a connecting post.
4. Fourth row. knit 4 tbsp. with a crochet with one peak, alternating them with arches of 5 air. loops. start row 3 air. lifting loops instead of 1 tbsp. with a crochet, finish with 1 connecting column.
5. Fifth row. Knit similarly to the fourth, but knit arches from 3 air. loops. knit the last arch in the form of 1 air. loop + 1 half-column with a crochet.
6. Sixth row. Start from 3 air. lifting loops, 1 tbsp. with a crochet in the same arch, in each next arch knit 4 tbsp. with a crochet, 2 tbsp. with a crochet, knit in the first arch of the row, finish with a connecting post in the third lifting loop.
7. Knit the seventh row in the same way as the fourth.
8. Knit further according to the scheme.

Summer hat with wide brim.

In order for the brim of this natural cotton hat to keep its shape, you can use a piece of wire.

Connect a chain of 8 air into a ring. loops. In each row, replace the first loops with the required amount of air. lifting loops. And end the rows with a connecting column, unless another end of the row is indicated.

1. First row. 24 st. with a crochet.
2. Second row. In every third loop of the row, knit 3 tbsp. with a crochet with one base, knit 3 air between the triplets of columns. loops.
3. Third row. In the triples of the columns of the row below, knit (2 sts with a crochet with one base + 1 st with a crochet + 2 sts with a crochet with one base (it turned out 5 loops)), over the air. loops of the bottom row knit 3 air. loops.
4. Fourth row. In every five knit with a crochet (2 sts with a crochet with one base + 3 sts with a crochet + 2 sts with a crochet with one base), over air. loops of the row below knit 3 air. loops.
5. Fifth row. Knit similarly to the previous two, in Art. knit with a crochet of the lower row (2 sts with a crochet with one base + 5 sts with a crochet + 2 sts with a crochet with one base), over the air. knit loops for 3 air. loops.
6. Sixth row. knit with arches of 5 air. loops, fixing them Art. single crochet in every third loop of the row below. Knit the last arch as 2 air. loops + 1 tbsp. with 2 crochets.
7. Seventh row. 3 air. lifting loops, 2 tbsp. with a crochet from the same arch, * 2 air. loops, 1 tbsp. without a crochet in the next arch, 2 air. loops, 3 tbsp. double crochet the next arch *, knit from * to *.
8. Knit further according to the scheme.

Insert a thin wire into the last row of hat fields, tie one row of st. without a crochet. Starch the finished product.

Next hat with a twisted brim suitable for the beach, and for a walk on a summer evening, being the highlight of the whole outfit.

This hat is knitted in a spiral and does not require knitting air lifting loops. The beginning of each row can be marked with a contrasting thread for easy loop counting.

Connect a chain of air into a ring. loops.

1. First row. Link 16 tbsp. with a crochet.
2. Second row. In every st. with a crochet, knit 2 tbsp. with a crochet.
3. Third row. Above every second st. with a crochet, knit 2 tbsp. with a crochet.
4. Fourth row. Tie 2 tbsp. with a crochet over every third st. with a row crochet below.
5. Knit according to the pattern.

Continue knitting until the bottom reaches the required diameter, then knit without increments to the required depth. Fields knit similarly to the bottom. If desired, you can alternate rows with increments and without increments. In this case, the fields will fit a little more to the head.

Like any product, it is better to try on a hat several times in the knitting process to achieve the best result.

A brim hat is an attribute of elegance in both men's and women's wardrobes. A stylish hat always refreshes the image, makes it more refined and complete, it is an indispensable headdress in the off-season and does an excellent job not only with an aesthetic function, but also with the task of protecting its owner from the cold wind.

Also, the hat visually corrects, masks the flaws in appearance. If the facial features are large, then it is recommended to wear a hat so that it hangs slightly above the forehead, and if the facial features are small enough, with a snub nose, then the hat is recommended to be slightly shifted to the back of the head.

Hat knitting pattern crochet

Translation of a description of knitting a men's hat from English.

Size: 7. Hat measurements: Height - 10 cm Circumference at the bottom: 56 cm Brim - 6.5 cm wide. Materials: Carpet yarn: 255 g of yarn in color A and a small amount of color B and C.

Steel hook (2.75 mm) Optional: 70 cm of lining tape, 3.8 cm wide, color of your choice.

Hat height - 11 cm.
Circumference at the bottom 48-50 cm.
You can reduce it by changing the hook 1.5 (the circumference will be 42-45 cm.)

Margins - 6.2 cm wide.
Materials: Yarn Pekhorka, children's cotton - color Light violet
Composition: 100% cotton. Thickness: 200 m / 50 gr.
on the rim a slightly different color.
Hook 1.75
Density of work 15 loops = 5 cm
Yarn in 2 additions

crown

With the main color, tie 8 columns into a ring b. n., close in a circle with a connecting column (ss).
1-3rd row add in a circle 8 + 8 (in each loop 2) \u003d 16 + 8 (through one loop) \u003d 24 loops.
4th row - no increase,
5th row increase in every 2nd loop = 36 p.
6th row - no increase
7th row increase in every 3rd loop = 48 p.
8th row - no increase
9th row increase in every 4th loop = 60 p.
10th row - no increase
11th row increase in every 5th loop = 72 p.
12th row - no increase
13th row increase in every 6th loop = 84 p.
14th row - no increase
15th row increase in every 7th loop = 96 p.
16th row - no increase
17th row increase in every 8th loop = 108 p.
18th row - no increase
19th row increase in every 9th loop = 120 p.
20th row - no increase
21st row increase in every 20th loop = 126 p.
22-32nd row - straight
33rd row increase in every 25th loop = 131 p.
34th row - no increase
35th row increase in every 26th loop = 136 p.
36th row - no increase
37th row increase in every 27th loop = 141 p.
38th row - no increase
39th row increase in each 28th loop = 146 p.

Change to a different color for the rim of the hat.
You can use a single-color thread, or decorate with stripes of different colors.

40th row - no increase
41st row increase in each 36th loop = 150 p.
42-52 row - no increase (straight).

If the volume is insufficient, continue to increase:

43rd row increase in every 37th loop = 154 p.
44th row - no increase
45th row increase in every 38th loop = 158 p.
46th row - no increase
47th row increase in each 39th loop = 162 p.
48-52nd row - no increase. (if necessary, continue increasing through the row,
but knit depth only up to the 52nd row)

Cut the thread and go to the starting color.

Fields. We adjust the width of the fields to your taste and desire.
Description to the maximum extent possible.

1st row knit for the outer walls of the loop, the previous row, adding
in every 12th loop = 162 p.
We begin to knit the 2nd row for both walls of the loop, adding to each 13th loop = 174 p.
3rd row - no increase
4th row - increase in every 14th loop = 186 p.
5th row - no increase,
6th row - increase in every 15th loop = 198 p.
7th row - no increase
8th row - increase in every 16th loop = 210 p.
9th row - no increase
10th row - increase in every 17th loop = 222 p.
11th row - no increase (last row + 12th row without increase) if you need wider fields, like a cowboy hat, then continue
12th row - increase in each 18th loop = 234 p.
13th row - no increase
14th row - an increase in each 19th loop = 246 p.
15-16th row - no increase

To finish work.

Decorate the crown, highlight the middle, bend the top with a dome, steam off the crown and fields,
press hard and steam the upper folds.
My knitting is sooooooo dense, the hat holds all the folds and fields perfectly, if something doesn’t work out for you, try diluting 1 teaspoon of PVA glue with 1/4 cup of water, turn the hat upside down and moisten the entire bend of the dome in a circle, abundantly, so that the thread is abundantly saturated.
Next, turn the hat over to its normal position and fix the fold with clothespins, let it dry completely, at room temperature.
When everything dries, remove the clothespins and carefully steam again through gauze.
Scheme for knitting hats with double crochets