When creating floral-themed crafts, you should pay attention to a flower such as chamomile. It is very gentle and beautiful flower, which can be used to decorate a postcard or create a paper designer decoration for interior. The scope of this flower is quite wide, so it’s worth trying to recreate it using different techniques.

Master class: DIY paper daisy

To make a daisy out of paper, you need to proceed step by step, fulfilling all the requirements of this technique.

To work you will need:

• PVA glue
• Yellow and white paper
• Pencil
• Scissors
• Millet
• Compass

Manufacturing process

1st method:

• On paper white Using a compass, circles of the desired size are drawn. All circles must be the same size.
• Cut out a circle and fold it in half three times. After this, the resulting workpiece is cut in half, not reaching the end, and the sharp corners are rounded off at the top. Having unfolded the resulting workpiece, you need to cut along the intended edge in the same way, without reaching the end. The result was a blank for chamomile.
• To ensure that the edges of the chamomile are bent down, you need to twist them using a pencil.
• From paper yellow color cut out the core and glue it in the middle of the workpiece.
• A thick layer of PVA glue is applied to the surface of the chamomile core. Take millet and fill it with core glue. After the glue dries, you will get a chamomile flower, the core of which looks very realistic, thanks to the millet grains.

2nd method:

• White chamomile petals are made according to the same principle as in the first option.
• The core is made of yellow paper. To do this, cut out a long yellow strip and chop it finely, creating a fringe effect. Instead of yellow paper, you can use a yellow napkin.
• Using a toothpick, twist the fringed strip into a tube. After twisting the core, it needs to be glued to the white petals.

3rd method:

• This method is the easiest. Cut out a circle from yellow paper. It will be the core of the chamomile.
• Cut 5 strips from a sheet of white paper.
• Both edges of the strips are coated with glue and glued together. This is done with all strips. After gluing the strips, distribute the strips on the table in the desired sequence and glue the core in the middle, covering all the joints.

All three of these options are great for kids because they are very quick and effortless.

How to make your own daisy from accordion paper

In order to make a daisy on your head, there is great master class, where the chamomile is made into an accordion. To do this, take paper of the desired color and fold it in the form of an accordion. After that, it is unrolled and collected with a thread in the middle. In appearance, the blank will resemble a bow. The edges are connected to each other, coated with glue and glued together. The middle is decorated with a bead. To do this, just apply a drop of hot glue and stick it to the center of the flower.

How to make an origami daisy

An original way to create a daisy from paper is origami. For this purpose, there are special schemes according to which such crafts are made.

To work you will need:

• 12 sheets of yellow colored paper.

Manufacturing process:

• Fold a sheet of paper in half, mark a clear fold line and unfold the paper.
• Turn the sheet over and fold it in half again, mark a fold line and turn the sheet inside out again.
• Fold the two upper corners of the paper into the middle and mark the fold lines.
• Turn the sheet over to the other side and do the same procedure with the other two corners, only in the opposite direction.
• On the side where there are two white corners, fold both sides into the middle, forming an acute angle.
• The top corner is also bent to the middle.
• Fold the workpiece in half.
• 12 of these parts are made.
• Each piece is put on another. It forms and closes a circle. The result was a very beautiful and original paper daisy.

Very beautiful daisies can be made from corrugated paper. To do this, take corrugated paper in yellow and white colors and cut out the necessary details. Cut out the center of the flower from yellow paper. Petals are cut out from white paper. All petals must be same shape and imitate the real ones. The more petals, the more magnificent and realistic the chamomile will be.

Collecting such chamomile is quite simple. To do this, stick the petals one by one on bottom part middle until the desired effect. If desired, you can make leaves for chamomile. To do this, they are cut out of green corrugated paper. To give the leaves a more realistic look, they are twisted lightly onto a pencil. The edges of chamomile petals are twisted using the same principle. This will give the craft pomp, volume and the effect of a blooming flower.

There are many ways to create daisies. They are all varied and interesting. Using photos and videos, you can recreate any flowers without much difficulty.

Video on the topic of the article

DIY paper daisies. Master class with step by step photos

Olga Mikhailovna Sinegubova, teacher at MBDOU kindergarten compensating type of the second category No. 26, Rostov-on-Don

Description of material: This master class is intended for older children preschool age. It will be useful for teachers preschool institutions senior groups.
Purpose: gift, work for an exhibition, interior decoration.
Target: Making a composition using the origami technique.
Tasks:
- teach children various techniques working with paper;
- concentrate, focus on the process of making crafts, follow verbal instructions;
- develop Creative skills, imagination, fantasy;
- develop fine motor skills hands;
- expand children's communication abilities.

“Little sun on my palm,”
White chamomile on a green stem.
Yellow hearts with a white rim...
How many are there in the meadow, how many are there by the river!”
A. Fet

Group work of older children

Required material:
- squares of white paper with a side of 5 cm;
-green paper for leaves;
-brown paper for the basket;
-colored cardboard for the background;
-yellow paper napkins;
-scissors, simple and curly;
-glue.

Step by step process manufacturing:

1.Fold basic form"triangle".

2.Fold in half and unfold.

3.Turn the workpiece at a right angle downwards.

4. Connect the sides of the workpiece to the fold line.

5. Turn the workpiece over and bend the corners.

6. Turn the workpiece over. One petal is ready.
You need to make 8 petals.

7.Make a center out of a yellow napkin.

8.Collect a flower.

9. Compose the composition.

Early morning sunshine

The clear is rising

Let the daisies sleep

Doesn't work in the field.

Butterflies flutter

From flower to flower,

They rejoice in the morning

Sunny day!

We're going to the daisies in the field

Let's go out for a walk

Enjoy the summer

Sing and dance! (O. Drago)

White daisies – small miracle! Favorite flowers from childhood. Who hasn't collected them? Let's try to remember our childhood and assemble daisies only now from origami modules.

Materials:

2 sheets of white paper,

2 sheets of green paper,

1 sheet of yellow paper,

PVA glue,

universal glue,

thin wire for leaves,

thick wire for the stem,

green corrugated paper,

Progress:

Prepare white modules for chamomile petals. Make the modules the size of 1/64 sheets of A4 format.

Gather the entire flower with PVA glue to prevent it from falling apart. A chamomile petal is an arch, with only the corners facing inward to create a smooth edge. Glue one corner of the module into the pocket of another module. We made our arch from 17 modules (8 at the edges and 1 top), but you can make it from 11 modules, if you wish.

Make 5 such petals.

For the middle, prepare 10 green and 10 yellow modules measuring 1/32 sheets of A 4 format.

Make two rows of them: the first - 10 yellow modules, the second - 10 green modules. Connect them into a circle, then turn them out.

Glue the petals.

Cut a 2 cm strip from yellow paper, cut it into grass, roll it into a roll and insert it into the middle.

For chamomile leaves, prepare green modules sized 1/64 of an A 4 sheet. For one leaf you will need 15 modules. It is better to make 2 leaves per flower. From 15 modules (7 at the edges and one at the top), assemble an arch with the corners facing outward, as the chamomile leaves have small teeth.

Cut two small wires for the leaves, wrap the edge with green corrugated paper. Glue the wires into the pockets of the lower modules, twist the wires together.

Cut the thick wire for the stem. Make a loop from one edge, wrap it with green corrugated paper, and wrap it with leaves. Using universal glue, glue the stem to the flower.

There are many types of daisies found in nature, so you can get creative and come up with your own options. For example, we made a large chamomile based on the description of a sunflower (“Flower of the Sun”). Only the petals were made white and the middle yellow and they did not make a cup at the bottom.

Creation scheme modular origami paper daisies for beginners. Master class with photos

Scheme for creating a modular origami daisy from paper for beginners. Master class with photos

As a child, each of us collected paper crafts. Ships, airplanes, frogs - traditional paper toys. However, the resilient Japanese did not stop there. Origami is a whole culture, the art of paper plasticity. In today's article I will introduce you to one of the types of this art - modular origami. For some reason, I wanted to remember summer today and I bring to your attention origami daisy flowers. This very beautiful, clean flower will look great in a composition on your desktop. After all, the warm rays of the sun blow from him, looking at him, you always want to go on vacation. this moment I will offer you a daisy origami diagram - the easiest to work with. When you master such a volume of work, you will definitely create another scheme, a heavier, but charming daisy according to a different scheme. Already from the name it is clear that these crafts are based on modules, which, when inserted into each other, are assembled like a construction set. Therefore, the first thing we need to master is creating a module. To do this, we need a regular A4 sheet 1. Cut the sheet into 16 equal parts, as shown in the figure. 2. Take one sheet and bend it in half.
3. Once again in half and unfold it back. Turn the fold towards you
4. Follow the lines, fold the edges towards the center.
5. Turn over and fold the bottom flaps up. At the same time, we bend the remaining corners behind the triangle.

6. Unbend, folding small triangles along the marked lines, and again bend the flaps up. Fold in half.
7. The module is ready.
8. On one side it has a pocket, which we will need during assembly.
Don't be afraid of this long description. In fact, the module itself is assembled simply and very quickly. Once you figure it out, your hands will continue to twist the modules by themselves. Further things you need to know before starting assembly - the module has 2 sides: Short:
and long:
This is important because during assembly we will connect the modules along the long or short side. And finally, we move on to the process of creation itself. I'll show you one simple diagram from modular origami. Having mastered it, you will be able to take on more complex models. The “Chamomile” scheme, the first and second rows will be assembled from 20 modules Pink colour. When assembling, the module is placed on the short side, as shown in the picture.


We make the third row of 10 yellow modules, placing the module on the long side. At this stage, be careful that the tails of adjacent modules are connected. That is, we get a staggered connection.

After this, we turn our flower over and the remaining rows will be made in modules on the short side.
Fourth row - 10 yellow modules.
Fifth row - we put 2 elements on each module. Assembly takes place in such a way that the free pocket ends up inside. Thus, we will need 20 white modules.
Last sixth the row will consist of 30 white modules. We put 3 elements on 2 modules, again the free pockets should be inside.

The flower itself is ready, all that remains is to make the stem and leaves. To do this, we need a regular straw and green electrical tape.
We wrap the straw with electrical tape, make leaves from colored paper or from the same electrical tape. We insert the stem into the middle of the flower. To do this, we squeeze the chamomile petals a little, and a hole is formed on the back side for the straw. It must be said that there is no need for special fastening; the stem will hold on just fine.
Make a few more of these daisies and you will have a wonderful one. spring bouquet. Such a craft can become a good gift friends and family.

Comments

Related posts:

Scheme for creating a modular origami Snow Maiden from paper for beginners. Master class with photos Scheme for creating modular origami snowflakes from paper for beginners. Detailed master class with photo