Wax melter for home use. How to choose a wax melter for depilation Wax melter for hot wax how to use

Every day the number of women who prefer to take care of themselves without resorting to salon services is growing. Firstly, this provides significant savings in both time and money. And secondly, purchasing materials and products for self-care is not difficult. This is why wax depilation using cartridges has become very popular at home.

The essence of waxing (waxing)

To remove excess hairs from the surface of the skin, wax is applied along the hair growth and then sharply torn off in the opposite direction, i.e. against the growth of the hairs.

When the waxy material is lifted from the skin surface, the hair adhering to it is removed along with the follicles. As a result, the skin becomes smooth for 3-4 weeks.

The optimal hair length for waxing is 3–4 mm.

Waxing involves different methods of applying wax to the skin:

• using a spatula;
• from the cartridge.

It should be noted that using cassette wax application greatly simplifies the procedure, since the wax layer is uniform and thin. This saves both material consumption and time.

The wax is applied in the direction of hair growth and torn off in the opposite direction.

Hair removal with cassette wax

The cartridge is a rectangular plastic container filled with wax. The cartridge cover has a roller. With its help, the wax is evenly distributed over the surface of the skin.

The cassettes are loaded with wax with various skin-beneficial additives.

What is needed for depilation

In order for waxing to give the expected results, before starting the procedure you should prepare all the necessary materials and tools:

• wax cartridge;
• paper strips;
• antiseptic (chlorhexidine, alcohol, etc.);
• wax remover.

How to heat wax in a cartridge

According to the temperature regime of use, cassette wax is warm, i.e. it must be heated. Otherwise, such raw materials cannot be applied to the skin. There are several ways to heat the wax material.

Application of wax melter

The simplest and most reliable method of heating wax is to use a special heating device. The wax melter is plugged into the power supply and the temperature setting is set as recommended by the manufacturer of the wax cartridge.

The wax melter is designed to heat the wax cartridge

After reaching the required temperature, the device will give a signal indicating that the raw material is ready for use. Modern models are equipped with a temperature sensor that helps maintain the desired wax temperature throughout the entire procedure.

Using a microwave

If you don’t have a wax melter on hand, you can heat the cartridge in the microwave. To do this, the cassette must be freed from packaging and foil and sent to the oven. Warm-up time varies between 1–3 minutes. This depends on the amount of wax in the cartridge, as well as on the power of the microwave.

After heating, you need to carefully apply the wax to your wrist and determine how easy it is to apply and whether there is a danger of burning the skin. If the need arises, the cartridge can be additionally heated for 10–15 seconds. You can heat the wax as many times as you like - this does not in any way affect its properties and quality.

Water bath

To heat the raw materials, you need to take a container of water and place it in a water bath. This entire structure should be kept on low heat. The water in which the cartridge is located should not be brought to a boil.

The wax will be considered ready for use if it has a liquid consistency and its temperature is comfortable for the skin. The heating time of the cartridge in a water bath largely depends on the thickness of its walls, as well as on the density of the raw material itself.

Nine Steps to Waxing

The procedure for removing excess hair from the body using wax in a cartridge is quite simple and easy to learn.

1. Cleanse the skin of impurities.
2. Disinfect the skin with chlorhexidine.
3. Place the wax cartridge in a special wax melter or heat it in the microwave or in a water bath.
4. Draw a test line of wax on a paper strip or wrist. This is necessary to make sure that the wax is warm enough, spreads evenly and is ready to work.

   When applying wax to a strip of paper, you can determine the readiness of the raw material for work.

5. Apply wax to the skin, and the length of the wax line should not exceed the length of the paper strip. When applying the wax material, the skin should be held slightly above the treatment site.

   The wax needs to be spread over the skin.

6. Place the paper on the skin surface and carefully smooth it onto the wax along the hairline.

   A paper strip is smoothed onto the applied wax

7. Remove the strip with a sharp jerk in the direction of hair growth.

   Hairs removed along with the roots remain on a paper strip with wax.

8. Repeat the previous steps for the entire problem area.
9. At the end of the procedure, the skin must be treated with a special product after waxing. With its help, wax residues on the skin are removed. As such a product you can use: wax removal lotions, napkins soaked in a special composition, fatty cream, olive or linseed oil.

If a wax melter was used to heat the wax, then the cartridge does not need to be removed from the heater during the procedure.

Video: home waxing in cartridges

In order for hair removal with wax to be as effective as possible, and discomfort during depilation and consequences after the procedure to be minimal, experts advise following some recommendations.

What is advisable to do before depilation

It is recommended to treat the skin with a scrub 12–24 hours before the procedure. This will remove the stratum corneum and make it easier to pull out the hairs along with the follicles. In addition, after scrubbing the skin, the length of the hairs increases, which have not yet grown to 3-4 mm and, accordingly, the wax can capture them and remove them along with the root.

Treating the skin with a scrub helps prevent the appearance of ingrown hairs in the future, since it is easier for new weakened hairs to break through the thinner skin.

Immediately before waxing, it is recommended to steam the skin: you can take a hot shower, or just for 10–15 minutes. Apply a towel soaked in hot water (55–60 °C) to the problem area. This preparation will open the pores and make hair removal much easier.

Before applying wax, you can apply baby powder to the skin, which will minimize injury to the skin when the wax strip comes off, and will also protect the skin from accidental burns when using heated wax.

Procedures and activities after waxing

2-3 days after waxing, cosmetologists advise treating the skin with a scrub twice a week to prevent ingrown hairs. For the same purposes, it is necessary to use special lotions and creams for ingrown hairs.

• 1. How to use a cassette type wax melter
• 2. How to use a can-type wax melter
• 3. How to use a combination wax melter
• 4. How to clean a wax melter from wax

Depending on the design, there are several types of wax melters:

1. Cassette.
2. Canned.
3. Garland.
4. Combined.

Each of the devices consists of three elements: a stand for the container, a cord, and a control knob. The built-in thermostat automatically selects the optimal wax temperature. It is convenient to use a cassette-type wax melter because it has a roller that allows you to evenly apply the wax mass. This minimizes the risk of burns.

In a cassette wax melter, the wax in cartridges is heated to a maximum of 60 degrees. The heating element is located on the base of the device. They are equipped with a small window through which it is convenient to control how much wax is left.

A jar wax melter heats the mixture to 120 degrees. It is rarely used for personal purposes, since the bowl has a large volume. Convenient to use for a huge flow of clients. There are devices for home use with small jars. Devices are available with a stand for two cans.

Garland is relevant for beauty salons. It is a device with a stand for several cartridges. As a result, you can serve two clients at the same time, changing types of wax as needed.

Combination appliances combine can and cassette elements. You can set your own temperature for each type of wax. It costs more than individual models, so it is more often used in salons than at home.

How to use a cassette type wax melter

Epilation with warm wax is carried out as follows.

1. The cartridge is removed from the packaging and installed in a vertical position in the device. The wax melter is connected to the network for about 20 minutes.
2. The wax becomes liquid and easily flows over the cassette. Then, using a sliding head, it is applied over the treated area of ​​skin. After this, the cassette is placed vertically on the table. If you put it down, the wax will leak out.
3. When the mixture thickens, the cartridge is reconnected to the power supply and the wax is heated.

How to use a can type wax melter

The wax melter heats the wax in the bowl. The volume can vary from 400 to 800 ml depending on the number of clients served. For personal use, it is better to take a small bowl.

A can wax melter consists of a heating element and a container of a certain volume. The melting of the wax occurs under the influence of temperature and pressure that flows out of the steel chamber. Outer bowl made of plastic. The material is durable, resistant to high temperatures and mechanical stress. There is a temperature regulator on the front panel.

There are different types of can wax melters for use: for one or two cans. The device may be online even if you remove the bowl.

Instructions for using the device:

1. It is installed on a flat surface.
2. The lid opens.
3. The wax is placed in a container (it must be clean and dry).
4. The device connects to the network (the red light comes on).

There is no need to press any additional buttons. The device begins to heat up automatically after connecting to the network.

Upon completion of work, the bowl is washed and dried, and stored in a cool, dry place.

One can of wax will be completely melted and ready to go in about 30-40 minutes. More powerful devices heat the mixture in 15 minutes. The container is covered with a plastic lid. Periodically, you can open it and check the readiness of the wax.

You can use a can-type wax melter to heat a container with granulated wax or tablets. The bucket is removed from the wax melter using plastic handles.

After heating, the temperature controller switches to another “MED” mode, maintaining a constant temperature. If the wax begins to cool and thicken, the control can be turned to the right and the temperature will increase.

How to use a combination wax melter

The combined wax melter is a multifunctional device. Suitable for heating wax and paraffin. Used in beauty salons. Consists of a container for a jar and a cartridge.

The rules of use are the same as for other types of devices. Only the structure of the device differs. The cassettes are installed in the same way as in individual wax melters, then the device is connected to the network, and a certain amount of time is expected until it is completely warmed up.

How to clean a wax melter from wax

There are several methods. The easiest way is to clean the surface with alcohol wipes, which you can buy at the pharmacy. Under the influence of isopropyl alcohol, the wax quickly dissolves. Any other solution with an alcohol content of more than 40% will do.

If the dirt is not complex, oil is used to cleanse the skin after hair removal. The oil is removed with a damp cotton pad.

The wax melter should be cleaned immediately after finishing work, before it has cooled down. A warm surface can be wiped with vegetable oil. Remaining wax is removed with alcohol.

Professional stores have special products for cleaning wax melters, for example, from Depileve.

Simple stains can be removed using special wipes, which are sold with the depilation kit or separately.

Among the traditional methods are vegetable or olive oil. Fat cream has the same effect. Apply a small amount to contaminated areas and wait. After 10 minutes, clean the wax melter with cotton pads.

You can try to wipe the wax off the surface with soap and water, but the method is lengthy and requires a lot of physical participation.

Just five years ago, wax melters were used only in salons. If you want home depilation, please use a water bath or microwave. You buy wax, put it in a saucepan with water or in an oven and wait until it melts to the desired condition. And then, during the procedure, you run to the stove to heat up the cooled one. Or, as an option, you do the whole procedure in the kitchen. Now, with special devices for heating wax, everything has become much simpler, more convenient and safer.

A wax melter is a heating device that is used immediately before depilation to prepare cosmetic wax. The design of such a device is simple: it is the heating element itself, a wax bowl, control buttons and a power cord. Wax melters come in cans, cartridges, and combinations; their design principles are different, but the function is the same: heating the wax and maintaining a uniform temperature throughout the entire operating time of the device. So that you understand the difference: if you heat wax, say, in a water bath, you can overexpose it and get burned. Then, while you are doing the legs, the mass has time to cool down, you must warm up the wax again, because even if it’s warm you won’t be able to work - it’s tight and doesn’t roll out into strips. It is enough to put a portion of hard wax into the wax melt once and wait 30–40 minutes until it melts. In 30–40 minutes the whole mass will warm up and acquire a homogeneous consistency. You just need to take it on a spatula and apply it to the skin. Until you turn off the device, the wax will not cool down - it will be exactly the temperature that you (or the automation) set on the device.

Types of wax melters

Wax melters are adapted to the form of release of the wax itself - and it is produced in cartridges, capsules and jars.

What types of devices are there:

• Cassette (cartridge) wax melter. In such a device, wax is placed in special cassettes or cartridges - directly in the production packaging. Since each manufacturer has its own cartridge size, when choosing a device, you need to ask which company’s wax is suitable for it. Because it’s impossible to “fit”, the cassette fits into the heating container like a glove. The cartridges also differ in width: some are intended for the face, others for the legs and back. When the wax becomes warm, it is applied to the skin through the roller hole in the upper part of the device. When you acquire some skill, you will understand that in a cartridge wax melter the material is consumed very economically thanks to this roller. The wax is applied exactly to the selected depilation area in a thin and even layer, without splashing or spreading. In some models, the case is equipped with an indicator window - through it you can see how much wax is left in the cartridge.
• Jar wax melter. This parting is used for hot hair removal. The wax is heated directly in the jar in which it was released. Since wax reservoirs are universal and can hold up to 800 ml, the device can work with wax from any manufacturer. The heating mode is set manually, depending on the volume of the container. The wax is heated to a liquid consistency - this is the only way to do hot depilation - and applied to the skin using a spatula. Expensive models of jar wax melters have a thermostat, thanks to which you can change the temperature of the contents of the jar, and a thermostat, which allows you to maintain the desired temperature of the wax for the duration of the procedure. The device is mainly used in beauty salons. Due to its high performance, many people think it is too powerful for home use, where there is simply no need to heat 600–800 ml of wax for one procedure.
• Combined wax melter. The device has reservoirs for both cans and cassettes, so the device combines the functions of simple models and is additionally equipped with a thermostat. Wax in such a device can be used for different depilation zones. How much can be prepared at one time depends on the model of the device. A compact combined wax melter, for example, holds a 400-500 ml jar and three 100 ml cartridges - such a device is convenient to have at home. If the declared volume is larger, this is already equipment for the salon, and the cost, of course, will be higher.

How to choose a device

It’s easy to decide on the choice of a can wax melter - they differ in design and bowl volume. Decide which manufacturer you trust - it is better to order directly, without intermediaries. Cartridge wax melters are available for cassettes of different widths and shapes, so before purchasing a machine, it is important to find out what brand of wax it can work with. Some women were given such advice by specialists in the salon - out of friendship, of course. A girl could come for waxing, do it once, twice, three times, and then ask if this result could be repeated at home. The masters, knowing what kind of wax their client was used to, advised a suitable device. But then the girls had to make a choice again.

We are all used to doing depilation in the bathroom (although it is more convenient in a cooler and ventilated room), and there is not always an outlet there to turn on the wax melter. You can, of course, find a model that will run on battery power or batteries, but more often there are options powered by an electrical outlet. Wax melters with a base (on a stand) are suitable for salons - they are quite bulky and look like an electric kettle. One end of the power cord is plugged into the outlet, the other into the base. There is no need to disconnect the device from the network during operation. Another advantage is that you can heat several cassettes at once on one stand.

For home use, wax melters without a base are often purchased - it is believed that they are not so convenient due to the need to unplug them from the outlet all the time. But many women neglect this rule - they leave the wax melter to work until they have depilated all problem areas. Then they say that everything worked out well, the wax melter has been working for a year, a year and a half, two years - depending on how many - and it still hasn’t burned out, despite improper operation.

It is practical to choose professional (or semi-professional) models of cassette wax melters with a thermostat.

Budget Chinese devices do not have it; the temperature is set manually, and when you are unaccustomed to choosing the settings, it is easy to make a mistake and overheat the wax. In wax melters with a thermostat, the wax is heated continuously until you turn it off. Almost all models are equipped with a light indicator - it is needed to determine the readiness of the wax. It is convenient when there is a window on the side wall of the device (wax level sensor), through which you can see how much wax is left in the cartridge.

The combined wax melter successfully combines both models; the only drawback is the high cost of such a device.

Which wax melter is best for home

A cassette wax melter is definitely better for home use - especially if you are just learning wax depilation. It's inexpensive and easy to understand. You can overheat and spoil the wax only if you keep the device turned on for a very long time. But there will be no burn from it. Cassette wax melters have a maximum heating temperature, and it is low.

You can diversify the depilation procedure and try different types of wax, warm and hot, using a combined wax melter. Its cost is higher than that of the cassette version, starting at 3,000 rubles (the cartridge version can cost 400 rubles).

Strips or film wax - which is better - video

Rating of wax melters

Wax melters are popular among Russian consumers:

• Shape from White line (China). Cartridge wax melter, available with or without a base. Designed for standard 100 ml cassettes, suitable for heating sugar paste. Additionally equipped with a residue control sensor. Designed for home use. Approximate price: from 650 rubles.
• Velvet Lady Color (Italy) is available with a base for one or more cartridges. Suitable for the salon and home, holds the temperature for a long time. Cost: from 800 rubles.
• TNL Professional (Korea) is designed for one or two cartridges, available with or without a base. The device is equipped with a thermostat and is suitable for home use and salons. Cost: from 600 rubles.
• Igrobeauty (Russia). Cartridge wax melter, available without base. You can only heat one cassette at a time, but it is compact and easy to use. Through the side hole you can control the remaining wax. Price: from 700 rubles.
• Irisk (China). A cartridge wax melter with a base for one or two cassettes, equipped with a thermostat, so that it maintains the temperature after being disconnected from the network. It is most often used at home, but can also be used in the salon. There is an indicator of wax remaining. Cost: from 1100 rubles.
• Planet Nails Mini Wax (China). Combined wax melter, with connectors for cartridges and a reservoir for paraffin, film, granular and jar wax. Designed for a small volume of wax - 100 ml, so it is more suitable for home depilation. Price: from 1500 rubles.
• Cardi RuNail (Russia, China). A 400 ml jar wax melter is designed for heating wax and paraffin. Equipped with a thermostat. Wax preparation time is 30 minutes. Cost: from 900 rubles.
• Pro-Wax 100 from White Line (China). 400 ml jar wax melter for depilation with hot wax. Cooking time: 15–20 minutes. The device is equipped with a thermostat; the wax in it maintains the desired temperature for a long time. Cost: from 1500 rubles.

How to use a wax melter

Waxing with warm and hot wax is done differently. Warm wax is prepared in a cartridge wax melter, hot wax in a jar melter.

Depilation with warm wax

What you will need for depilation:

• cartridge wax melter, with or without base;
• wax cassettes, one or several, depending on which area you are depilating;
• oil for moisturizing the skin - you can take baby oil, you can buy a special one, it is produced in a series of cosmetics for skin care after depilation;
• talc or baby powder (for treating the skin before depilation);
• paper strips for depilation.

The wax is produced in ready-to-use cartridges; you simply need to place them in a wax melter. Cassettes are wide (for depilation of legs, arms, chest) and narrow (for armpits and bikini).

1. Insert the cartridge so that the roller is on top.
2. Place the wax melter vertically and plug it into the network or install it on a stand (base) connected to the network.
3. The average time to warm up the wax is 25–30 minutes; usually the manufacturer indicates the exact time in the instructions.
4. When heated, turn off the wax melter and turn the cassette over with the roller side facing down for a few seconds.
5. Take a wax melter and, holding it at a 45° angle to the skin, apply wax to the problem area along the hair growth.
6. Once applied, place the wax melter back on the stand or simply in a vertical position and connect to the power supply.
7. Glue a paper strip on top of the already applied wax, leaving about 1 cm at the bottom and run your hand along it.
8. When the wax has cooled slightly, grab the free edge of the strip and sharply tear it off against the hair growth.
9. One strip can treat several areas of the skin; do not throw it away while there is wax on it.

During the first procedure, a whole cartridge of wax may be used just for the legs, then the wax consumption will be more economical. For some women, one cartridge lasts 2-3 months.

How to remove leg hair with wax from a cartridge - video

Depilation with hot wax

For the procedure you will need:

• wax in granules;
• can wax melter;
• skin care product after depilation;
• wooden spatula.

Film wax can be used to treat any areas, especially sensitive ones - armpits or bikini area. This method of depilation is considered very gentle - it does not cause any bruising or irritation.

1. Open the package of granulated wax, pour it into the wax melt tank so as to cover the bottom.
2. Plug in the wax melter, check that the indicator on the front panel lights up, and use the toggle switch to set the desired temperature. Some manufacturers do not always put marks on the toggle switch indicating the temperature; it is very difficult to use such devices. When choosing a wax melter, make sure that all markings on the device are clear to you.
3. After 10–15 minutes the wax is usually ready. You can check its readiness by applying it to a strip of paper. The finished wax has a uniform consistency and is applied in a continuous stripe. Check the temperature by dropping a little wax on your wrist; it should not burn the skin.
4. If all tests were successful, take a wooden spatula, dip it in a bucket and apply melted wax to the skin along the hair growth in several layers.
5. Wait 20-30 seconds for the wax to cool, pick up the edge and pull the strip against the hair growth.
6. Lubricate the skin with oil or caring milk.

How to use a can wax melter - video

How to clean a wax melter from wax

You cannot wash the wax melter with water; it is not recommended to clean it with alcohol-containing lotions. Pure or diluted (40 degrees, no less) alcohol or alcohol disinfectant wipes are suitable. You need to wipe the bowl and body of the wax melter and leave for 15 minutes, then remove the remaining softened wax.

You can remove wax using vegetable oil if you preheat the wax melter. The walls and tank must be thoroughly wiped with cotton pads soaked in sunflower (or any other) oil. If traces of wax remain after wiping, wipe the wax melt with a cloth soaked in alcohol.

You can simply heat up the wax melter, pour off the melted wax, and scrape off the residue with a wooden spatula.

The most gentle way, but also the most expensive, is to purchase a special product for cleaning wax melters; it should be sold as a related product in the same store where you bought the device itself.

One of the most popular hair removal methods today is waxing, which involves the use of liquid wax that should be applied to the skin. To maximize convenience and reduce the risk of injury in this process, there are special devices - wax melters (wax heaters). They allow you to carry out hair removal procedures effectively and painlessly, and you can easily use them both in a cosmetology clinic and at home. No special skills or abilities are required to conduct independent sessions, and the user only needs to be attentive and follow the instructions from the instructions.

A standard wax melter consists of a heating element, a stand and the wax melting apparatus itself. It is safe to use it at home, but operation may require high energy costs, so in apartments with old electrical wiring, such equipment should be used correctly and with caution. Previously, waxing was done manually by heating the wax on a stove and applying it to the skin with special strips. Today there is no need for all these manipulations, and with the help of a wax melter the whole process can be brought to automation. Each such modern device has a built-in thermostat, thanks to which the temperature of the wax is maintained at a given level, which reduces the risk of burns. At the same time, the working fluid does not harden throughout the entire procedure, and there is no need to melt it from time to time.

Benefits of waxing

Among the advantages of the technique, the following factors can be noted:

• wax does not lead to skin irritation (if its temperature does not exceed critical levels);
• waxing can be done no more often than once every two weeks;
• after prolonged exposure to wax, the hair on the treated surface becomes thinner and loses color;
• You can remove hairs using wax melters from any area of ​​the skin.

Types of wax melters

Depending on the design features, wax heaters are divided into cassette, can and combined. Each of the presented varieties should be considered separately.

1) Cassette. The containers for wax in such wax melters are special cartridges (cassettes), sold separately from the device itself. Disposable blocks have roller attachments, thanks to which the melted wax is distributed evenly over the skin in a thin layer. In this case, the mixture should be distributed in the direction of hair growth, in one direction. Its temperature does not exceed 60 degrees Celsius, which reduces the likelihood of getting burns during procedures. As auxiliaries for cassette wax melters, strips of cellulose are used, which are tightly applied to the wax after its application.

2) Cans. Unlike cassette waxes, wax at elevated temperatures (up to 120 degrees) is used during the work process, which is stored in special jar containers. Such devices are used only in cosmetology clinics and are not suitable for home use. If you use this technique carelessly, you can easily get burns and damage the hair follicles, which can lead to ingrown hairs into the skin. To apply wax from a can wax melter to the skin surface, use special spatulas that come with it. The advantage of the method is the ability to cover large areas of skin where hairs can grow in different directions (chest, bikini area, armpits, etc.).

3) Combined. They combine the features of cassette and can wax melters. They have slots for different types of containers with wax and control panels for regulating the thermal regime. The cost of such devices is high; only cosmetology centers or very wealthy citizens can afford to purchase them. The advantages of combined wax heaters are obvious: with their use, you can remove hair of all types on any area of ​​the skin, without the need to replace wax containers and additional adjustments.

What should you pay attention to when buying a wax melter?

Regardless of what type of wax heater you choose, you should take into account a number of features of the device, which can vary widely. Thus, wax melters of the same type differ from each other in the following parameters:

• power;
• sizes;
• working volume;
• wax heating rate;
• method of connection to the electrical network.

If you need a wax heater for home use, then you can purchase a device with a large capacity that allows you to simultaneously use several cartridges (jars) with wax. If the epilator will travel with you from city to city, then it would be advisable to take care of its compactness and lightness.

Sequence of procedures

Using a wax heater correctly at home is very simple and to do this you just need to remember the order of the actions performed. First, you should make sure that the wax containers (cartridges or jars) contain enough material to carry out the session. Then the wax melter is connected to the power supply and heated to the set temperature. This is followed by the procedure of applying wax to the skin (always a thin layer) in the direction of hair growth.

While the mixture has not cooled, you need to put paper strips on it and lightly press on them with your fingers. Using one hand, stretching the skin at the edge of the paper, the other makes a sharp tug at its end. This removes from 60% to 90% of the hairs, and to obtain smooth skin the procedure will have to be repeated several times. After completing all manipulations, it is advisable to treat the skin with moisturizing oil. It is not recommended to use liquid soap and water for these purposes for at least eight hours. A day after the session, you can use the scrub as a remedy against ingrown hairs into the skin.

Today, wax melters are used for epilation of any area of ​​the skin and are distributed among ordinary consumers. The simplicity and efficiency of use puts them in one of the first places among other hair removal products, and allows the devices to be used not only in cosmetology centers, but also at home.

From this article you will learn:

• warm and hot wax for depilation - reviews, methods,
• deep bikini waxing: videos, reviews,
• wax strips for depilation: rating 2019.

Waxing at home is a fairly simple procedure that basically only requires choosing the right brand of wax or wax strips. It will be an excellent option for removing unwanted hair for a long time, unless, of course, you have problems with ingrown hairs or inflammation of the hair follicles.

Ways to remove unwanted hair with wax –

• using warm or hot wax,
• depilation using wax cartridges and fabric strips,
• using wax strips (the wax is already applied to a paper or fabric base and is applied without heating).

We will take a detailed look at the techniques and products for each type of waxing. This detailed review will help you avoid many of the problems that beginners face and will make your first procedure easier, as well as help you choose the best hot wax or wax strips for depilation.

Waxing: techniques

Most often, girls are interested in how exactly depilation is carried out at home, and especially depilation of the bikini area at home. Since the hair in the bikini area is often coarser and thicker (than in any other places), only hot wax can effectively deal with it. Keep in mind that unlike cold and warm wax, hot wax is best suited for depilating coarse hair.

Warm wax differs from hot wax in that, as a result of the inclusion of special additives in the composition, the wax becomes plastic at a lower temperature. This reduces the risk of skin burns, but slightly reduces the adhesion strength of the wax to the hairs. Waxing at home can also be done using special wax cartridges, which we will also discuss below.

1. Depilation with hot wax –

In order to use hot wax for depilation at home, you may need a special wax melter, which will make the whole procedure easier (Fig. 4-7). Since almost all models of wax melters have built-in sensors for heating and maintaining the temperature of heated wax, you will not need to constantly heat up the cooled wax and check to what temperature it has heated up. The wax melter will do all this for you.

To what temperature the wax should be heated is indicated on the manufacturer’s packaging (usually 40-50 degrees). If there is no wax melter, then the wax is heated in the microwave or in a water bath. Depending on the manufacturer, as well as the amount of wax, the time it takes to heat it in the microwave can vary (from 1 to 3 minutes). The hot wax should become viscous, but not too hot to avoid getting burned.

The main stages of depilation with hot wax –
1) the wax must be heated to the desired temperature,
2) apply hot wax to the skin with a special spatula (Fig. 8),
3) wait a little - from 20 seconds to 1 minute (depending on the brand of wax),
4) and with a sharp movement, tear off the hardened cake of wax from the skin (Fig. 9).

2. Depilatory wax in cartridges –

Warm wax for depilation in cartridges is a new form of wax that has appeared quite recently (Fig. 10). Such cartridges are inserted into a special device, which simultaneously acts as a wax melter and also has a rotating roller for applying molten wax to the skin (Fig. 11). Wax cartridges are best suited for depilation of the face or areas of skin with fine, soft hair.

Depilatory wax in cartridges: how to use...
Leaning the roller against the skin, you need to move it over the desired area, which will lead to the application of wax to the skin in an even thin layer. Immediately after this, you need to apply a cloth to this area of ​​the skin (they come with the cartridges) and smooth it thoroughly. Next, you need to wait a little until the wax hardens, after which, with a sharp movement against hair growth, tear off the fabric strip (Fig. 12).

Waxing: video

1. Exfoliate before each waxing procedure.

Peeling is primarily necessary to prevent the appearance of ingrown hairs. After you pull the hair out of the hair follicles, the pores in the skin through which the hair came out may close, allowing hair to grow subcutaneously. Almost half of women who undergo waxing then face this problem.

It is best to do peeling with special peeling gloves or using a body scrub. In general, peeling using scrubs or special gloves should be done constantly (at least 2-3 times a week). This will then prevent the problem from appearing after waxing, plus it will make your skin smoother.

2. Always use baby powder or talcum powder before waxing.

After you have exfoliated the surface layer of dead skin with peeling, sprinkle it with baby powder or talcum powder. It will absorb excess moisture and fat, and this will improve the adhesion of the wax to the skin and hair.

3. Make sure unwanted hair is the correct length.

In order for all the hairs to be captured by the wax, they should be neither too long nor too short. The optimal length, which will allow you to stick well to the wax and then easily pull it out by the roots, is from 5 mm to 1.5 cm. If the hairs are too long, they will need to be cut, and if they are too short, then wait a little for them to grow back.

4. Always check the temperature of the wax when using the hot waxing method.

If we are talking about hard types of wax for hot wax depilation, which need to be heated before the procedure, then it is necessary to check the temperature of the wax before applying it to the skin. If the heated wax is too hot, you will get burned. If the wax is not hot enough, wax depilation simply will not remove hair, but will only stain the skin. But, if you use regular wax strips, then, of course, there are no risks.

5. Always pull wax in the opposite direction of hair growth.

It is very important! Remember that wax is always applied in the direction of hair growth, and removed - always against hair growth (you must also stretch the skin with your free hand). The tearing movements must be very sharp and fast. The wax cake must be torn off in one movement, otherwise not all the hairs will come off.

But repeating the procedure is not recommended, since repeated application of hot wax and its subsequent tearing off will certainly lead to skin injury. If sparse hairs still remain after waxing, it is better to remove them with tweezers.

6. Always moisturize your skin after the procedure.

This tip is suitable for any type of unwanted hair removal. After the procedure, it is necessary to moisturize and soothe the skin. This is especially important if you have thin, sensitive skin. Any means you like will do.

Depilation wax: reviews, which one to choose

Wax for home depilation is produced by different companies in various forms: briquettes, tablets, disks, granules, cans, cartridges. The form of release does not matter. Buying depilatory wax inexpensively is not difficult, but it is much more difficult to choose the best manufacturer, with whom waxing will become less painful and more effective.

The most popular hot waxes for depilation are:

Strips for depilation at home -

When it comes to cold waxing, this is where depilatory wax strips come into play. The wax has already been applied in a thin layer to a special base, and it is cut into strips that are convenient to use.

How to use wax strips for depilation -

Using wax strips for depilation is very simple and does not require any special skills.
This product is completely ready for use. You just need to warm it up in your hands by rubbing it between your palms. After this, the strip is glued to the skin strictly in the direction of hair growth. After this, the strip must be carefully adjusted by pressing it against the skin. Next, the wax strips for depilation are torn off, but it is important to do this strictly against hair growth.

As for the kits, you can buy depilatory strips at any supermarket. All manufacturers, on average, have from 10 to 24 strips in a box, plus wet wipes for use after the procedure. Wipes are necessary to cleanse the skin of wax residues, and at the same time they also soothe and moisturize the skin.

Wax strips for depilation– review of brands

• "Markell"(20 strips + 3 pads with oil) – from 240 rubles. Markell wax strips are designed for the face, underarms and bikini area. Hypoallergenic. They are praised for their comfortable size.

How to remove wax after depilation -

In general, waxing at home is a bit of a troublesome procedure and requires certain skills. Common problems are:

• problems with how to remove wax from the skin after depilation,
• difficulties in cleaning the workplace after depilation (when using hot wax).

You can remove wax from the surface of the skin after depilation either with special napkins, which are sold along with the wax, or with cotton swabs soaked in olive or any other vegetable oil. Oily liquids easily remove any wax residue on the skin.

But you can wash depilation wax from other surfaces (cleaning the workplace) with alcohol, turpentine, or special products sold in specialized hardware stores. Of course, you can try to cleanse your skin with alcohol, but remember that alcohol has a strong drying effect on the skin, and you still shouldn’t do this.

We hope that our article on the topic: What is the best way to buy wax for depilation at home - turned out to be useful to you!