Neck jewelry made of threads. DIY jewelry: how to create a unique look

24.10.2019

One of the criteria for female beauty is an elegant and long neck. For many peoples, she is the standard of femininity. The neck requires some attention, and, of course, jewelry! We will talk about the oldest, but still ultra-fashionable decoration - the choker. You will learn how to make a choker for your neck with your own hands using available materials.

When translated from English, “choker” means “strangler.” This is a short necklace, its length is 35-40 cm, when worn, it is located at the base of the neck and is adjustable in girth. The choker is also called a “standing collar”.

If you have a short or wide neck, then a choker necklace is not the best option for you, because visually this decoration makes your neck even wider and shorter. In this case, it is better to give preference to thin chokers and colors that are not very contrasting to the skin. Chokers with long elements will make your neck look longer, such as a lace choker.

Very often, a choker is confused with another type of necklace - a collar. A collar is also a short necklace, but slightly shorter than a choker (30-35 cm), it fits tightly to the neck. Visually, the collar creates a transverse division of the neck, and very often consists of several rows of beads or pearls.

History of origin

There are many versions of the origin of this decoration. According to one of them, the Indians also wore items made of straps, beads and animal claws around their necks. They believed in the mystical protective power of these decorations.

Europe was also conquered by this accessory. Thus, French women of the 16th-18th centuries also preferred chokers; they were worn by both ladies from high society and courtesans. By wearing a red ribbon around their necks, women expressed their grief to those who died during the revolution.

In the 19th century, the English princess Alexandra of Wales hid a scar on her neck using a choker. Imitating the princess, many ladies of that century began to wear similar jewelry.

Queen Elizabeth I of England also adored this decoration.

Princess Diana also loved this pearl accessory and more.

The inimitable Coco Channel preferred choker necklaces in her collections. Her jewelry consisted of ribbons made of velvet, leather, silk and pearls. An innovation was the tablet insert.

In the 90s, a choker often expressed belonging to a certain subculture (punks, rockers, hippies).

The fashion trend of “choker mania” has survived to this day. You can make a choker with your own hands with minimal time, effort and money! The materials from which a choker can be made are simply amazing in their diversity.

What do you need to make a choker necklace?

Materials

The materials for making a choker can be different: leather, suede, velvet, lace, wires, threads, ribbons, cords and much more. All of them can be used both to make the base of the choker and to secure pendants.

The basis for weaving chokers from beads and beads can also be different.

Beading line(nylon). Products on a fishing line turn out to be more “rigid”, that is, they hold their shape, unlike products on a thread. The disadvantage of fishing line is its ability to deform, i.e. it is better to store products made from it in a straightened form, or use braided fishing line. When weaving a product from large beads, it is better to take a thicker line, with a diameter of 0.2-0.25 mm.

Or elastic (spandex), which comes in various diameters and colors. The heavier the beads used in weaving, the stronger the elastic should be.

Used in beading and bead making, but it is better in two folds.

(lanka) - a metal string coated with a layer of polymer, available in different thicknesses, flexibility and different colors. Very convenient for making jewelry from beads.

Wire soft, comes in different diameters (0.3-04 mm is suitable for beading). From wire with a diameter of 0.5 mm you can make a frame for beads and stones.

(with memory effect), sold as springs and are highly durable.

Accessories

– one of the types of clasps for jewelry. Locks come in the form of a simple hook, and there are also carabiners that are more reliable in use.

Used to secure the ends of the product. A lock is attached to the hole in the ear.

Necessary for connecting various elements. They can be solid (cast) or split.

– used to disguise nodules.

With different sizes of links, they are used to decorate and lengthen necklaces.

Decorative elements

In addition to all of the above, they will be useful in your work scissors, pliers ( necessary for compressing and decompressing rings and other accessories), wire cutters(will be needed for biting off excess materials), and also glue(Superglue or epoxy-based glue will do).

Fasteners and fastening methods

The choker should have not only a beautiful, but also a reliable clasp. Handicraft stores and online stores offer various types of accessories for jewelry.

Let's look at how to attach some types of fittings to a product.

We fix the ends of the product with adhesive tape or tape and align the ends. Next, we put the clip on the end of the product, while hiding all the protruding elements and threads. Using pliers, carefully press the clamps on both sides and place a lock on the ears of the clamps.

The end cap can be fixed to the ends of the product using glue. At the same time, using rings and wire, you can insert natural stones into the middle of the choker.

You can connect the ends of the decoration using pieces of a chain on which the lock will be attached. In this way you can increase or decrease the length of your product.

You can do without any accessories at all. The simplest thing is to make a loop of lace that will hold the bead, thereby forming a lock.

Using the same principle, you can weave a buttonhole from threads.

A lace choker will look much more interesting if its ends are metal.

Using wire cutters, bite off two identical pieces of metal tube. We put them on the end of a wire or cord. Use a hammer to fix it at the ends and give it the desired shape.

If you are making a choker from threads, you can weave such a neat loop.

To do this, fold the four threads in half and fix them. We begin to braid with one thread all the others according to the principle of tying knots in macrame. We weave about 1 cm on one side and the other. Next, we continue weaving in any way you choose.

Beaded chokers

Beads are an indispensable material in needlework and, of course, in the making of jewelry. Even one or more strands of beads strung on a fishing line will add uniqueness to your look. And if you weave a beaded choker with your own hands, it will turn out even more interesting!

To do this, we will need beads of two colors, fishing line, pliers, wire or ready-made rings, a lock and a pendant. We collect 4 beads on the fishing line and form a “cross” from them. In a circle between each two beads we add one more, you should get a diamond.

We make the next diamond in the same way.

We continue to weave diamonds to the desired length. Such a choker can consist of one woven strip or 2 or more. To fix the strips together, we insert diamonds of beads of a contrasting color between them. The result is an openwork choker around the neck.

You can make chokers from beads, beads, and bugles for everyday wear and for festive events.

By experimenting with other colors, you can weave bright decorations:

A visual diagram of a snake weaving tattoo choker:

Using this simple weaving technique you can make a whole set (rings, bracelet and tattoo necklace)

Using imagination and sleight of hand, you can get a tattoo choker in the form of flowers connected by wire rings. It is better to make the product from black fishing line, and its ends are thermally treated using a candle or lighter.

A tattoo choker can be decorated with beads by stringing them onto a fishing line when weaving.

Tattoo choker can be of different colors. Beads and seed beads will make the usual black look bright. The decoration can be combined with other jewelry, while correctly combining the color scheme.

A small themed pendant will give a highlight to the choker.

Lace chokers

Lace chokers differ from all others in their sophistication and sophistication. Depending on the color, their thickness and the decorative embellishments on them, they will look great with all sorts of things in everyday life.

To make a lace choker with your own hands, you only need a piece of lace (about 30 cm for the neck circumference) and accessories. A lace choker can be decorated with various decorative pendants.

Pearl beads will help make your choker more delicate and noble. You can simply embroider lace with them, glue them, or hang them with soft wire. The lock on the choker can be replaced by an ordinary thin elastic band fixed in the middle. The lace seams can be hidden under the satin ribbon at the ends of the product.

Narrow light chokers are a great option for light summer outfits. They can also be complemented with a pendant in the form of a decorative stone.

Wide light lace chokers are perfect for “going out” and will make your look more romantic; sequins will add extra shine to this look).

Chokers made of black lace are an irresistible decoration for any fashionista’s evening dress. Brooches can also be used to decorate a choker.

By decorating a black lace choker with beads and chains, you can make such a creative decoration. It can be worn both in everyday life and combined with an evening dress. If you focus on the central part of the choker, thereby lengthening it, then it is better to wear such jewelry with a neckline.

Using metal decorative ornaments, ribbons and lace, you can create such a small masterpiece!) In this case, the clasp will be a thin satin ribbon connecting the edges of the choker.

If you don’t have the necessary accessories for a choker on hand, then a simple Chinese clasp can help out, which you can also make yourself.

Black lace and pearls still look elegant.

The following master class will show us how to make such a choker with our own hands:

A choker with a medallion pendant has an extraordinary antique charm.

Satin ribbons are an excellent material for creating chokers! Even a small thin black ribbon, tied in a bow and decorated with a small pearl, can be a decoration on your neck.

Demonstrates the simplest options for making a choker with your own hands from ribbon Afinka DIY in their master classes:

A voluminous bow secured with a satin ribbon will add a piquant touch to the look. It is better to dilute the black color with something bright, for example, such a bright red center.

A wide satin ribbon will enhance the effectiveness of the image of an attractive woman. Shades of red always attract attention.

Satin combined with multi-colored stones will make your look more interesting and sophisticated.

Ribbon chokers are very popular due to their ease of manufacture and sophistication. Brooches, beads, seed beads, rhinestones, etc. are suitable for decorating them. It is also not necessary to make a clasp; the ribbon can simply be tied at the back.

Or make an elegant bow on the side, the long ends of which will hang beautifully in front. In this case, you can combine ribbons of contrasting colors.

If you have various decorative “things” left from a bag, belt and clothes, then you can safely decorate a satin ribbon with them.

If you have a necklace lying around that no one has worn for a long time, you can also use it to make a choker. You wrap the necklace with bright ribbons, and the decoration can be made from threads in the form of fluffy tassels.

Beads of different sizes can make a voluminous choker.

An ornament made of simple checkered fabric will look very cute on a child’s neck. You can decorate it with bows and a strawberry-shaped pendant.

Velvet chokers

A velvet choker is a universal decoration and looks organic with almost all clothes, if you choose the right color scheme.

Based on the basic colors of your wardrobe, you can make chokers of various colors, as they say, “for all occasions in life.”

You can decorate a homemade velvet choker with anything you have at hand: bows, beads, rings, decorative crosses.

A black velvet choker does not tolerate competition, so it is better to wear it on an open neck without any other jewelry, or with thin chains that match its style.

Velvet is a material that looks very impressive in itself. Therefore, you should not overload your product with various decorative decorations.

Thread chokers

A thread choker is no less original. This decoration will enliven any everyday look: be it jeans with a shirt or a dress.

Olga Konovaltseva tells in her master class what materials and in what quantities are best to use when weaving a choker from yarn:

You can make a calmer version of a braided choker using pastel-colored threads. For ties we use a simple satin ribbon.

By decorating our braid around the edge with beads, we get such an elegant choker. It can be worn with an evening dress or simply with a white shirt.

By weaving beads directly into a braid, you can make such variations of “modest” chokers. You can wear them either one at a time or several at once. When making them, you can use any thread and even bleached twine.

There are different options for weaving a choker with your own hands from threads. This is a great option for fans.

You can decorate a choker made of threads with various pendants, for example, in the shape of a sun, or by attaching your amulet, a cross or any natural stone to it.

Using metal elements (rings, chains) you can get such a “rich” braid for the neck.

The braid can also be woven into a large metal chain.

Using a blank, a thick cord or an old necklace, you can make a bright choker by tightly wrapping it with threads of various colors.

Leather and suede chokers

Products made from leather and its substitutes always look stylish and impressive, especially in costume jewelry. Such jewelry is mainly preferred by fans of casual and military styles. To make a leather choker you don’t need any special skills.

A narrow strip of leather will further emphasize the slender neck of its owner. As a lock, you can use ties made of thread or suede cord with “brooms” at the ends.

A laconic strip of brown suede will perfectly complement the delicate look.

Using a metal ring, rivets and pink leather, you can create a trendy accessory.

A strip of leather, a chain, glue and accessories - all this in deft hands gives birth to a stylish decoration. It will look extremely good with both a dress and leather items.

From a small piece of leather stitched along the contour on a machine, as well as metal rivets, you can create a designer decoration. Be individual!

Chokers made of laces and beads

Even a child can make a choker from lace and beads with his own hands! But this fact does not take away from this product its charm.

Such chokers can be connected to each other, forming, for example, a triangle from beads in the middle.

Chokers made from laces can simply be tied around the neck. You can also use the laces to weave a neat braid and tie the resulting choker into a bow!

You can use a small piece of a large chain as a choker decor.

Decorative embellishments (rings, hearts, leaves, etc.) will make string jewelry more interesting. Note that the laces can be used in various colors, and not just the usual black and brown. Red color will always make you stand out from the crowd.

Braided cords can be used to create a choker, and together with beads you will get such a creative decoration.

For inventive fashionistas - a choker made from a small scarf!

A bright scarf, tightly tied around your neck, can radically change your entire appearance, as well as enhance all the necessary accents.

For girls who prefer calmer colors in everyday clothes, a good option would be to combine a neckerchief in unison with the color scheme of the rest of their clothes. For example, a shirt with pale blue stripes will complement a dark blue scarf.

A universal option for many: a white shirt and a bright or more discreet choker scarf! A win-win!

A choker neckerchief is a truly fashionable accessory that will add charm and enhance the glamor of any lady!

For those who always want to be original and stand out from the crowd, you can combine several chokers at the same time. For example, a choker made of rhinestones and beads will perfectly complement a black leather cord.

Thin lace, selfish velvet, daring lace and you are unique!

The choker is also a stylish accessory for men. It emphasizes the courageous and strong neck of its owner, thereby attracting the attention of girls.

The main difference between a men's choker and a women's one is the small number of details in it.

Jewelry for men is not very common, so the male half of humanity prefers to wear discreet models of chokers. Basically, such models are made from natural materials: leather, wood, rubber, magnets and natural stones, metal.

Create your own jewelry and be stylish!
Categories

Want to know how to make a DIY neck pendant for $5 or less? We have collected for you some of the simplest methods that are suitable for everyone! Models made of stone, beads and macrame will complement any outfit, be it strict classics or frivolous romanticism. Interested? Then open it and read on!

How to make a pendant with your own hands: TOP 3 ways for $5

Grace and space for imagination

It is very easy to create jewelry from stone. You can buy the stone itself at an exhibition or in a specialized store. Often semi-precious rocks (turquoise, amber, jade, amethyst) are sold in stores associated with esotericism. Their cost starts from $1. You will also need pliers and thick wire. It can be found in craft stores at a cost of $0.5 per meter.

Follow the instructions in the photo below and you will have a beautiful pendant in less than half an hour!

What is important: by showing your imagination, you can create both simple models and incredibly complex designer products.

Macrame pendant: a new breath for old technology

Braided cord pendants on a chain look incredibly stylish. The cost of the cords is quite low (about $2-5 for everything), the price of the chain depends on the thickness and weaving (from $1 to $3 per meter). The final result will impress you! What is important is that it is suitable for daily wear and as a gift to a friend or mother.

Before you start weaving, place the doubled chain on the table. Place the cords parallel across it. Thread the ends of the chain into the loop - you will get a zashmorg. Secure the chain to the table with tape. Due to this, it will not slide on a smooth surface, disturbing you.

Photo instructions on how to make jewelry with simple macrame patterns:

Important: the number of cords may be more or less than in the photo.

Beads for beginners: summer fruits

During the period of sun, summer, warmth and open clothing, do you want to diversify your look with a bright pendant? In this case, bead weaving will be relevant for you, as it allows you to create unique and funny little things. The main advantage of the brick weaving that we offer is its simplicity and accessibility even for beginners.

There are a lot of options for how to make a pendant, but we suggest you pay attention to the image of pineapples. A bright exotic fruit that will fit perfectly into a summer outfit! For it you will need two colors of beads (preferably matte, Czech): green and yellow. Its cost: $1 for a standard bag. You will also need thread with a beading needle (less than $1) and scissors.

How to create such a pendant with your own hands, watch the detailed instructions on the video from YouTube:

After this article, you can easily make the TOP 3 simplest handmade decorations!
Our master class helped you, did the jewelry already delight you and your friends with its originality? In this case, give your ratings, write comments, and don’t forget to share the material with your friends on social networks. You might be interested in visiting our website

Handmade jewelry, will always look very original and stylish. Such decoration can attract the attention of others. Many people hesitate to make jewelry for themselves with their own hands only because they lack imagination, fresh ideas and certain skills. But if you follow the step-by-step master classes presented below, you can make an unusual decoration yourself at home. Let's take a closer look at what kind of decorations can you make? on the neck with your own hands.

In contact with

Classmates

Neck Jewelry

Pendants

Stylish neck cord

Suede or leather lace;
Accessories;
Pliers.

Step-by-step instruction:

You should start by cutting the lace to the required length.
Attach fittings to the edges of the lace.

The jewelry for the neck is ready. Thus, you can very simply and in the shortest possible time make an unusual cord around your neck with your own hands.

Bottle pendant

Step-by-step instruction:

You need to start by securing the pin to the cork so that the bottle can be conveniently hung on a cord or chain. To do this, the pin must be well coated with glue and threaded into the cork, as shown in the figure.
After this, the free end of the pin must be smoked into a ring using pliers. In this case, it is worth paying attention to the diameter of the ring, since the chain must pass through it freely. If the pin size does not allow this, then you can make an additional ring from wire of the required size. Attach the resulting ring to the pin.
Then you can start choosing the material with which the bottle will be filled. Absolutely everything can be used here. A small key, dried flowers, rhinestones, beads, seed beads, sparkles and much more will look very original.

Glitter pendant

For manufacturing you will need the following materials:

Glitter;
Metal base for pendant;
Matte glue;
Brush;
Pliers;
Chain with accessories or cord.

Step-by-step instruction:

Broken glass pendant

This version of the pendant is made using the method described above, only instead of sparkles, broken glass is poured into the workpiece. To do this, you must select glass fragments of two or more flowers in advance. The glass must be crushed well using a hammer. After this it is necessary glue to base, as in the previous version. When the glue has dried, the glass can be repainted any color you wish using regular nail polish.

Chokers

Braided choker

For manufacturing you will need the following materials:

Elastic beading thread or wire from old headphones;
Scissors;
Scotch.

Step-by-step instruction:

Fold the string in half and tape it to the table as shown in the image.
Start weaving the choker according to the indicated pattern.

Ribbon choker

Fabric ribbon of the desired width;
Accessories for processing the ends of fabric tape;
Scissors;
Pliers.

Step-by-step instruction:

Cut a piece of fabric ribbon to the desired length.
At the ends of the linen, secure the fittings using pliers.

The ribbon around the neck can be tied in a bow at the back.

Choker with ring

For manufacturing you will need the following materials:

from fabric;
Metal ring;
Super glue;
Scissors.

Step-by-step instruction:

Cut the fabric ribbon into two equal parts.
Glue the edges of the halves to the ring with superglue, as shown in the image.

This choker can be tied around the neck with a simple knot. If you make the same decoration a smaller size can be worn on the arm as a .

Choker in Chanel style

For manufacturing you will need the following materials:

Step-by-step instruction:

Cut the wire along the circumference of the neck, bite off the edges so that it is comfortable to put on the neck.
Place large beads on the edges of the wire.
Drop a little superglue into the holes of the beads and insert the fittings into these holes for fastening.

Similar to this technology You can make the same bracelet with your own hands, but only in a reduced size.

Chains and necklaces

Chain with braided pendant

For manufacturing you will need the following materials:

6 thick threads or laces of various structures and shades;
Chain;
Centimeter or tape measure;
Scissors;
Pliers;
Masking tape;
Chain clasp.

Step-by-step instruction:

First, you should decide on the length of the future product and cut the required size of the chain.
Fold the resulting piece of chain in half, place 6 laces parallel on top, as shown in the image.
Secure the chain around the laces as shown in the image, and then secure it with tape to the table and begin weaving.
When the wicker pendant is completely ready, the ends need to be trimmed, leaving a few centimeters.
Attach the clasp to the ends of the chain using pliers.

Bean necklace

For manufacturing you will need the following materials:

Step-by-step instruction:

First of all, you need to paint the beans in the desired color with nail polish. Leave the grains until completely dry.
Attach the printed template on the reverse side to a piece of transparent plastic.
Glue the beans onto the plastic using superglue, as shown in the diagram.
It's best to assemble the larger bean patterns first and work on the gaps later. They need to be filled with small beads, as shown in the image.
When the entire workpiece is sealed with beans and beads, it must be given time to dry completely.
Using a utility knife, trim the plastic along the edges of the product.
Using a hole punch, make holes at the extreme points on the plastic into which you need to thread the chain links.
Attach clasps to the ends of the chain.

Bead necklace

For manufacturing you will need the following materials:

Medium size beads or large beads;
A hairband that is covered with fabric;
Needle and thread;
A small piece of fabric to match the beads or beads;
Scissors;
Super glue.

Step-by-step instruction:

DIY bracelets

Now let's look at what kind of bracelets can be made make it with your own hands from scrap materials.

Ribbon bracelet. Option 1

For manufacturing you will need the following materials:

Wide plastic bracelet;
Ribbon or braid with a pattern;
Gluing gun;
Beads or seed beads for decoration.

Step-by-step instruction:

Apply a small amount of hot glue to the inside of the plastic bracelet using a gun, and attach a ribbon to the glue. Begin to evenly wind the ribbon or braid around the bracelet along its entire circumference.
The tape must be periodically fixed on the inside with drops of glue. If your tape has a pattern, and when winding it does not match, then there is nothing to worry about.
When the tape is completely wound, it must be cut and the ends secured with glue.
Using glue, attach several beads to the bracelet.

A stylish and original bracelet is ready! It takes a maximum of 20 minutes to make.

Ribbon bracelet. Option 2

For manufacturing you will need the following materials:

Ribbon;
Wire;
Needles;
Super glue;
Decorations according to your taste (flowers, buttons, clips, buttons).

Step-by-step instruction:

Our wonderful jewelry is ready!

While creating DIY neck jewelry the question arises - what to collect for? neck decoration, what basis to choose?

Well-known threads for neck jewelry- this is fishing line and nylon. But now they use more convenient and high-quality foundations.
Today, a popular thread for creating DIY neck jewelry is (jewelry string, lanka).

Jewelry cable has replaced fishing line due to its improved qualities: strength and variety of colors. Unlike nylon, when working with lanka, you do not need a needle, but you do need other tools that are often used when creating your own jewelry.
Wire continues to be used as a basis for neck decorations.

The positive qualities of wire include its softness, strength and variety of colors. Memory wire is used to maintain shape when creating a necklace. This decoration requires maintaining its shape and this wire is ideal for this.
Ribbon: satin, silk, satin, velvet, etc. This is a thin but wide strip of various materials onto which beads are sewn or strung. Most often, the tape is used together with nylon or other thread in order to gather the tape.

The result is a piece of jewelry with beads surrounded by silk and satin. Often the ribbon is used not as a base, but for additional decoration.

What to use for the base of neck jewelry is up to you. Fishing line, nylon, chains, wire, ribbons, waxed, velvet cords - everything will go into use. In my opinion, the end result is important - a stylish decoration.

Cool

Almost every girl can boast of extensive “bins” with very necessary things - scattered earrings, cute beads, bright buttons, ribbons, laces, pieces of lace and unusual fabric. It’s a pity to throw away such “riches”, but it’s unclear where to use them. But you shouldn’t despair, because it’s easy to make unusual and, most importantly, exclusive jewelry from these little things.

Surely many have heard about handmade, but did not dare to do it for fear that their plan would not be successful. But creating original jewelry with your own hands is not as difficult and time-consuming as it might seem at first glance. Materials and simple tools for needlework can be found in sewing stores and supermarkets, or ordered online. And then an endless flight of imagination takes over and exciting creativity begins.

Stylish handmade jewelry always attracts genuine interest and attention to its owner. And such a gift to relatives and friends will be doubly pleasant, since it was created with certain emotions.

This publication contains several step-by-step master classes on how to transform unclaimed items and simple accessories into a unique and effective neck accessory.

Asymmetrical necklace

To make an asymmetrical necklace inspired by the “Diorganic Leafy Waterfalls” necklace from the spring-summer 2014 collection of the Dior brand, you will need very little - plastic beads strung on a thread, reminiscent of pearls, a headband covered with fabric to match the beads, a thread with a needle, scissors, thick fabric of a suitable color and glue.

Creating a necklace does not require a lot of effort, but it will take a little time - since you need to carefully sew on each individual bead segment.

First of all, you need to measure and cut fragments of different lengths from the main thread. Then each of them needs to be folded so that one edge is shorter than the other and you can begin to attach them to the base.

First, long sections are sewn to the edge of the rim and gradually you need to move it in the middle, while the length of the bead threads decreases.

Long fragments are also basted from the opposite end of the rim, creating a beautiful asymmetrical line - long in front and short in back.

When the main work is finished and all the threads are attached, you need to make the final touch - sheathing the rim on the inside with thick fabric to cover all the errors and uneven seams.

Stylish bean necklace

To make a lasting impression with your appearance, you don’t have to wear designer clothes; you can just complete your look with an original necklace. And what could be more original than a decoration made from beans?

In order to make such a non-standard creation with your own hands, you should stock up on the following components:

printed necklace template,
beans,
gold-colored beads,
sheet of thin plastic 2-3 mm thick,
neon colored nail polish,
chain with fastening,
stationery knife,
Super glue,
tweezers,
hole punch for eyelets.

Before starting work, you should paint the beans with varnish and wait until they dry.

Then you need to print out the necklace template and attach a sheet of plastic to it.

On a transparent surface, you need to carefully glue one bean after another, after greasing them with glue.

After this, fill the remaining spaces with beads. You need to form the necklace in parts - first assemble the circles, and then fill in the small details.

Let the filled blank dry for a couple of hours. When the semi-finished product is completely dry, it must be placed on a cutting board and carefully cut along the contour of the glued components. Finally, you need to drill holes along the edges of the necklace and insert the chain mount into them.

Cord necklace

A cord necklace seems so banal and familiar that you simply don’t want to buy another one for your collection. But even such a hackneyed model can be diversified by decorating the rope with sequins and beads to match.

For the alteration, you will need two types of twisted laces in black, one of them with gold thread, large sequins in the same palette, thread and needle to match, suitable beads, scissors, pliers, glue and clasps for the necklace.

First, you need to measure the length of the ropes to suit your size, while the pure black one should be longer than the other. Then you need to glue the ends for the fastener onto the longer cord.

Black sequins should be sewn to the strand interspersed with gold thread, stepping back a few centimeters from the edge.

On top of the sewn sequins, several more sequins, only in gold color, and stored beads are attached.

And the final touch - a lace with sequins and beads is carefully sewn to the main cord with fasteners.

Macrame necklace

A necklace made using the macrame technique looks interesting on your neck.

To make such a decoration you will need 5 types of strands of different textures and colors, a chain, scissors, pliers, a tailor's tape measure, tape and clasps for a necklace.

First you need to measure and cut the desired length of the chain to suit you.

Fold the chain in half and place all the laces in a row perpendicularly on it.

Then make a zashmorg and secure the chain to the surface with tape and you can start weaving, as in the pictures below.

When all the laces are twisted, you should adjust the length by cutting off the excess.

Then attach the clasps to the chain.

Sequin necklace

A necklace with sparkles will create a festive mood and perfectly complement any look.

The materials you will need are glitter, matte decoupage glue, a tassel, a base for a necklace, pliers, clasps and a chain. Apply a drop of glue to the metal base, fill the entire surface with it and sprinkle with glitter. When the first layer has dried, you need to remove the remaining glitter from the workpiece and repeat the procedure with glue again, and so on until the glitter fills all the space in the base.

Attach the chain and clasps to the already dried semi-finished product.

Alternatively, you can use crushed glass instead of glitter.

To create such a necklace, pieces of glass, a hammer, a base pendant for a necklace, matte glue, nail polish, nail polish remover, cotton swabs or a disk will come to the rescue. Grind the glass with a hammer and repeat the same as with the glitter.