Snowflake kanzashi master. Snowflake made of satin ribbons using the kanzashi technique

19.10.2019

The New Year holidays are approaching, which means it’s time to think about creating an original decoration and making your own snowflake using the kanzashi technique.

What is kanzashi? It is the art of folding pieces of fabric to form beautiful flowers. You can make a beautiful snowflake using the kanzashi technique.

A beautiful snowflake made of satin fabric is an excellent interior decoration, a New Year's look, you can make a snowflake for a Christmas tree, a brooch or a hairpin.

Kanzashi snowflake - what you need to prepare for work

Tools you will need are scissors and a needle and thread.
Glue (hot gun or Moment glue).
Candle or lighter, tweezers.
The materials are satin ribbon 5 cm wide, white or pale blue.
Cardboard or a piece of felt fabric.
Use beautiful glue pebbles or small beads to decorate snowflakes.

How to make a kanzashi snowflake

We immediately draw your attention to the fact that it is necessary to prepare all the tools and materials, because the work ahead is painstaking, so you should not be distracted by searching for the necessary material and equipment.
You need to cut out squares measuring 5 by 5 cm from satin ribbon. In total, you will need 42 squares. The number of blanks and their size may vary and depend on the type of snowflake. Therefore, if you want to make a snowflake with small petals, then you need to prepare another ribbon 3 cm wide and make blanks measuring 3 by 3 cm.
From each square you need to make a petal. How to do it: fold the workpiece diagonally, then again and again. You will get a small triangle.
The outer corners of the figure need to be wrapped towards the middle part of the workpiece to create a rounded triangle shape. It is best to work with tweezers, because it is very difficult to hold such a small part in your hands. Instead of tweezers, you can use a clamp.
The first figure is ready, now you need to fix the corners. To do this, you need to cut off the excess and use a lighter to melt the edges. When you melt the edge, press the area with tweezers. You can also firmly press the cut area with your fingers a few seconds after melting. The fabric will not be as hot, but will still have time to set.
Look at the first petal - if it is uneven, you need to trim off the excess with scissors, trim it and also melt the edges of the tape with a lighter.
We make 12 such petals. There are still 30 blanks left to make pointed petals. The workpiece is folded in exactly the same way, only the edges need to be made sharp, not rounded.
We cut off the excess and melt it with a lighter. Make sure that all the pieces are the same size.
We take 6 petals, string them on a needle and thread, and tie the ends of the thread. It turns out to be a round center.
Now you need to glue the sharp triangles together. You can glue it with glue or string it on a thread. Only the petals are not glued completely, but in the corners.
We have made double petals, now we need to connect pairs of petals and insert a third one, this way we get blanks that need to be fastened in pairs (sewn or glued). In this way, the rays of a snowflake are formed.
The workpiece must be attached to the base. Cut out a circle from thick cardboard (or felt fabric). The diameter of the circle should be equal to the diameter of the central flower.
You need to immediately form a loop from a thin tape and glue it to the workpiece.
Next, you need to assemble the snowflake: glue the central part and the rays in sequence. The work is painstaking, take your time, everything will work out.
The snowflake is ready, all that remains is to make a few touches: attach beads or glue rhinestones.

You can come up with many ideas for creating New Year's snowflakes, including paper, fabric or felt. If we are talking about the kanzashi technique, then fantasy knows no bounds. From time immemorial, experienced craftswomen who know how to work with fabric have created incredible floral masterpieces for decorating hair and clothing. And such a technique spread for New Year's paraphernalia. From satin, silk or satin, needlewomen create charming snowflakes that can become the central element of a festive dress, complementing the image of a snowflake, star and the Snow Maiden herself.

DIY kanzashi elastic bands are a way to create a unique, incredible hair decoration with your own hands. Making kanzashi is rapidly gaining popularity all over the world, because this process is some kind of incredible miracle, how masterpieces from petals are created from ordinary squares of ribbon! We will show you how to make New Year's kanzashi step by step. The basis of this product is traditional sharp petals, but they cannot be called banal, boring and repetitive from product to product. The sharp petals used here are made in 5 layers, they are collected into flowers and twigs of different formats, and therefore the snowflake looks unique.

New Year's Kanzashi master class

The snowflake hairpin consists of sharp petals: single, double and triple. To make them, prepare (per one product):

squares of satin ribbon 5 cm by 5 cm in lilac, white and silver brocade - 7 pieces of each type;
squares of satin ribbon 2.5 cm by 2.5 cm, lilac and white - 28 and 35 pieces, respectively;
14 one-sided stamens with white, silver or lilac heads (which are available);
metal water lily for a bead with a diameter of 2 cm (or so) - 1 piece;
glass or iridescent half-bead with a diameter of 0.8 cm (or so) - 1 piece;
felt base with a diameter of 4 cm - 1 circle;
lace circle or flower.

Tools that you will definitely need in your work:

— scissors (they must cut the fabric well);

- lighter ;

- thread (white or lilac) with a needle;

- glue gun;

- a clip or elastic band as a basis for a hairpin.

So, how to make a festive kanzashi snowflake:

1 . All sharp petals used to simulate a sparkling snowflake are assembled according to the same principle, only the number of layers in them or the size will be different. To make a medium (largest) flower, prepare initial squares of three types (white, lilac and silver) with a side of 5 cm. The lighter is listed in the list because on the cut of the satin you can always see stray threads, which are difficult to get rid of without ruining the fabric. It is the flame that allows you to scorch everything unnecessary and make all the workpieces neat.

2. The initial action with squares is diagonal folding. Do this with pieces of all colors.

4 . From the resulting triangles you need to prepare a “layered cake”. The lilac color should remain at the bottom, silver in the middle, and white at the top. Carefully move the top layers relative to the bottom by 1 mm.

5 . Next, all that remains is to bend the resulting triangles to get the sharp shape of the petals. Cut off the tip and singe it, resulting in a fixed petal.

6. Carry out the same operations with two squares of second-grade satin ribbon (white and lilac) with a side of 2.5 cm. Collect a small sharp petal, but double. Coat the bottom of the small petal with glue and insert it into the hole of the large triple petal.

7. Make 7 blanks for the main flower.

8 . Glue the blanks around the circumference.

9 . For the top flower, make single white pieces. They are going on a thread. They will also need a metal water lily and a half bead.

10 . Glue a stamen along each five-layer part. With the length of your ponytail you get your bearings when the workpiece is ready.

eleven . Glue a lace flower into the center of the circle for neatness, and attach a water lily with a half-bead to the center of the top white flower.

12 . Glue the white tier onto the bottom large flower.

For the New Year, you want to decorate your home in some unusual way. Fortunately, on the Internet you can find many master classes that make it easy to create any paper decoration. In this article we will present you an option for making New Year's snowflakes made from ribbons using the kanzashi technique.

Kanzashi was not originally a craft technique. This was the name of the flowers that Japanese geisha girls used to decorate their hair. These flowers were made from fabric and various bright scraps to match the color of the kimono and eyes. These flowers were and are the only decoration for Japanese women, because they cannot wear any earrings, rings, brooches or rings.

In addition, kanzashi indicated the social status of the woman or girl who decorated her hair with them. The more flowers a lady has on her head, the richer she is. However, if a woman got married, then she was no longer allowed to wear a lot of jewelry on her head. She could attach a maximum of two flowers to her hair to complete her look.

At first, when kanzashi first came into fashion in Japan, they were ordinary simple combinations of fabric that looked like daisies. Only at the beginning of the 19th century a new style of kanzashi appeared - “tsunami”, thanks to which the flowers became multi-tiered, voluminous and more beautiful.

Kanzashi-tsunami were made only from handmade Chinese natural silk. The Japanese themselves already dyed silk in the colors they needed, using natural dyes.

In the middle of the 19th century, the Japanese even began to open workshops in which professional fabric flowers were made for all seasons. For example, in the spring, they create yellow kanzashi:

Daffodils
Peonies
Peach flowers

These same flowers are green in summer and red in autumn.

Europeans picked up the idea of kanzashi at the end of the 19th century and began to use it not only to create flowers, but also many other shapes. As a needlework technique, in Russia kanzashi began to be used to make hairpins decorated with flowers. Petals can be made in two forms:

Round

Acute

In exactly the same way you can make Kanzashi snowflakes made from ribbons. We will present a detailed master class on making one of these snowflakes in the next section.

How to make snowflakes from kanzashi with your own hands?

Snowflakes in kanzashi style look gentle and elegant. They can be used to decorate a Christmas tree, a brooch or a hairpin for a girl. We suggest you make one like this Kanzashi snowflake for New Year:

To make one product you need a set of the following materials:

12 satin squares with sides of 5 cm in blue and white colors (6 pieces of each color, respectively)

37 satin squares with sides 2.5 cm in blue and white colors
6 brocade square blanks made of lurex and shiny thread with sides of 4 cm
One circle of felt (either white or blue), the diameter of which is 3.5 cm
Needle, thread, heat gun
A small bead and a bead hugger corresponding to its diameter

The entire snowflake should consist of three main parts:

The main (large) flower is made from 5 cm square blanks
Small flower made from 2.5 cm square blanks
Branches (6 pieces) from white and blue squares

Now let's figure out step by step how to do this a simple kanzashi snowflake:

Fold three different squares - white, blue and brocade - diagonally to form triangles.

Place the resulting triangles on top of each other (on blue and white, and then on brocade) and fasten them with a needle, but do not sew them together.

Make a petal from this blank, sewing it together as in the photo:

Make 6 small petals from white satin ribbon

Insert these petals into the larger ones so that they look like this:

Make small double petals from small satin squares and then combine them into a flower:

Glue the large and small flowers together using a heat gun:

Glue a white felt circle on the wrong side:

Make rays from small white and blue petals and glue them between the petals of a large flower.

Glue a bead to the small flower to complete the snowflake.

This snowflake can be used in different ways. For example, attach a bobby pin or hairband to it. Then you will get a wonderful New Year's hairpin for a girl who is going to dress up in a Snow Maiden costume for a matinee. You can trim her dress with exactly the same snowflakes.

By attaching a braid to such a snowflake, you can decorate the New Year tree very elegantly. Moreover, now decorating a Christmas tree in this style is very popular and fashionable, since glass toys were popular many years ago. You can also make a garland out of snowflakes by simply sewing them together.

At the same time, snowflakes do not have to be made from ribbons of cold shades. You can use any tape you have on hand. In any case, snowflakes will look harmonious on the New Year tree and will not go unnoticed by the guests who come to your home for the holiday.

In the video below, the needlewoman shows master class on making kanzashi snowflakes for beginners. Here you can see the process of creating a snowflake, which we described in the article. Only here a slightly different fabric was used, and the snowflake itself has a different shape.

Video “New Year’s snowflake made of fabric and satin ribbons”

DIY snowflakes: a New Year's miracle made from satin ribbons

Continuing preparations for the New Year (and it’s just around the corner), I want to invite you to create such wonderful New Year’s snowflakes with your own hands! They can decorate not only the Christmas tree, but windows or mirrors, or you can simply put them on the holiday table as a decoration!

To create snowflakes using the Kanzashi technique, prepare:

-Satin ribbon 2.5 cm wide

-Needle and thread

-Beads, beads

-Scissors

-Tweezers (you can do without it)

-Glue (hot glue or Moment Crystal)

-Candle (you can take a lighter)

Snowflakes made from ribbons can be either simple or assembled on a frame.

In this master class we will take a closer look at simple snowflakes.

We collect narrow and round Kanzashi petals from a 2.5 cm wide ribbon.

Our snowflake must have a middle, so first we collect the round petals into a flower using a thread.

Cover the back side of the flower with a circle of tape.

Then we glue a round piece of paper between them.

We assemble the second row of modules only from sharp leaves. As a result, we get these modules and a flower in the center of the future snowflake.

Let's start assembling the snowflake. We assemble the first row of modules. Apply glue to the tip of the module:

And with this tip we glue it to the central flower.

So we glue all 6 modules to each petal of the central flower:

Using the same principle, we glue the second row of modules, consisting only of narrow Kanzashi petals.

Decorate the middle of the snowflake with a bead. You can add beads or beads to the tips of the branches.

Such a snowflake is called simple because the principle of its assembly is quite simple and understandable. Knowing how round and narrow Kanzashi petals are made, you can easily assemble other versions of voluminous snowflakes with your own hands from satin ribbons.

I wish you creative success! See you again!

Outside the window the snow sparkles, shimmers with all the colors of the rainbow, snowflakes are falling from the sky, it seems that Santa Claus himself is about to come. And on New Year’s Eve, he always comes to the children for matinees and holidays, for street celebrations and for theatrical performances. You should definitely prepare for a matinee or school holiday, buy a new dress, choose a hairstyle, and choose exquisite winter accessories.

A snowflake made of ribbons made using the kanzashi technique, which can rightfully be called a winter flower, can be a wonderful hair decoration. Firstly, it is made of the thinnest satin ribbons, modeled from specially shaped petals, and secondly, it really looks like a snowflake due to the fittings and shape matching the color. You can easily make a couple of hairpins with snowflakes using the master class below, let’s look at how exactly.

Snowflakes Kanzashi master class

To make a beautiful product, you need to buy the accessories indicated in the list below. For convenience, we will consider separate details for the upper and lower flowers, then it will be clearer what is needed for one winter fantasy snowflake.

Details for making a small flower:

12 pieces of satin ribbon each in white and blue colors - 2.5 * 52.5 cm;
2 white felt bases - 2.5 cm and 3.5 cm;
6 double-sided blue stamens;
blue rhinestone chain;
white half bead - 1.2 cm;
white beads with a diameter of 3 mm.

Details for making a large flower:

7 pieces of white, blue ribbon, silver brocade - 5*5 cm;
white felt base - 4 cm.

Details for making seven branches:

14 pieces of white and blue ribbon - 2.5 * 2.5 cm;
7 pieces of blue ribbon - 2.5*2.5 cm;
7 pieces of transparent rhinestones - 6 mm in diameter.

The winter ornament is conveyed by almost traditional types of kanzashi petals: triple sharp petals and round ones (double and single). Overall, it turns out to be a beautiful and delicate decoration. In addition, there is interesting work ahead on independent modeling of the middle.

Snowflake-kanzashi step by step

The photo shows fragments of fittings necessary for interesting work. We will not dwell on the preparation of pieces of satin ribbons. Craftswomen already know that threads that come loose during cutting should be scorched with the flame of a lighter, and this should be done carefully and quickly. But we’ll tell you in more detail how to model an interesting middle. Cut out a square of felt. Glue a large half bead onto it. Cover it with a chain of blue rhinestones around it. Next, cover it with beads – small and elegant. Sew the beads tightly, without gaps. After this, use small scissors to cut the felt around the circumference, clearly connecting the cut to the edge of the center.

To create a triple petal from 5cm squares, fold all the squares twice.

You should get triangles. Assemble “puffs” from blue, white and silver ribbon. Close the sharp corners with your fingers, then seal them with a match and cut them off from the bottom.

To create double rounded petals, use 2.5 cm squares. Layer blue on white. Press the sharp corners to a right angle. To form a drop, round the inside, move the sides back, and solder in this position.

Insert small droplets into the holes of the large triple petals.

Cut a round felt and glue all 7 petals onto it.

Glue another 17 rounded petals into a small flower yourself (it will become the top one), prepare blue stamens for decoration.

Cut the stamen threads in half. Glue each head along the small petal.

Also make branches from small blue, light blue and white squares. Model rounded petals with a central fold, single-layered. There are 2 times fewer blue parts - they will become the tops, the rest should be placed in pairs on the sides. Glue the branches together and decorate with crystal droplets.

Glue the branches between the large petals of the bottom layer.

A beautiful winter product is ready. The frost outside the window draws unique patterns, and we were able to simulate an imitation of such a creation from ordinary satin ribbons.