Various diagrams of volumetric triangles and a description of their implementation. Necklace made of beads “Triangles” Triangle made of beads, patterns for weaving beautiful pendants

A step-by-step master class with photos and weaving pattern will help you create an unusual, but very beautiful “Triangles” bead necklace with your own hands.

Tools and materials Time: 1-2 hours Difficulty: 3/10

• Bugle beads 6.4 mm (its edges should not be sharp, otherwise the necklace may crumble);
• Beads 10/0 and 15/0;
• 4mm round beads.

This very interesting “Triangles” beaded necklace has a strict geometric shape. The focus is on the geometric pattern of triangles, which is repeated over and over again to create a striking decoration.

Step-by-step instruction

Beads larger or smaller than 10/0 will not work, since the triangles will not be neat and flat enough, and we use 15/0 to fill the space between bugle beads.

Step 1: make the first loop

The weaving follows the pattern, and first we create the first loop from 10/0 beads. To do this, we string 5 beads onto a piece of fishing line, between which there may be a fastener element, move them to the end of the segment, and cross the tails of the fishing line in the next strung bead.

Step 2: stringing bugles

Next, we string 3 bugles, a 15/0 bead, another bugle bead, one 10/0 bead onto the lower tail (the longest one), and send it back through the stringed bugles, bypassing the bead. In this case, the glass beads should not be placed too closely to each other; leave very little space between them.

Step 3: Form a Triangle

Next we string another bead, a glass bead, and pass the tail through the first glass bead of the previous row, and the bead and glass bead of this one. In the same way we fix two more glass beads and move on.

According to the diagram, we fasten the glass beads around the first row in this way until you have the first triangle of the necklace in your hands.

Step 4: Add Beads

Step 5: make another loop

We finish the product with the same loop as at the very beginning. Later or immediately (depending on the type of clasp), these loops will help us design a clasp for a necklace, prepared in advance, or made with our own hands. In the same style, you can make not only a necklace from “Triangles” beads, but also earrings consisting of just one triangular motif.

Volumetric triangles can be worn as a pendant or keychain. Many of the diagrams presented below will help you make a product of a suitable color or motif you like, and a detailed description will tell you how to implement this idea.

So, you will need size 11 beads, colors according to the chosen pattern, nylon thread, and a bead needle.

Weaving is carried out from the middle of the thread, the length of which is 2.5 meters, at both ends. For convenience, in the example weaving will be made of two colors of beads - darker and lighter. Place 2 beads of a lighter color and 13 of a darker color on the thread, according to the pattern: 2light-13dark-2light-13dark-2light-13dark, passing through the first bead, close the bead into a ring. Then pick up two more lighter beads and do the ndebele step. Weave on dark beads using the mosaic technique, and on light beads use the Ndebele step. So weave the whole circle.

At the end of the circle, pass through two beads of a lighter shade. Continue weaving for three more rounds. On each corner you should have 6 pairs of light Ndebele. The first side of the triangle is ready.

Next stage - weaving the second side, it is carried out at the second end of the thread, and the beads of the first row are used. The second side is located above the first. When it's the corners' turn, don't forget to take the Ndebele step. At this stage, you can weave a decorative element to the triangle that will be located inside it. To do this, having reached the middle of the inner edge of the triangle, braid three beads onto which fasten the selected element (in the example, a heart) and continue weaving.

The second side is woven until all rows of the first are completed. Both halves will be symmetrical.

Now connect both sides in a circle. When sewing the edges, the threads need to be brought to the top edge of the triangle. Here the weaving of the tube will take place, with which the triangle can be attached to a lace or chain. The work takes place at both ends of the thread. Use the mosaic technique, passing the ends of the thread through the last bead towards each other.

Then weave a tube.

When its length is sufficient to wrap around the lace, start sewing.

And now the diagrams:

A triangle made of beads, the weaving pattern and master class of which you will find in this lesson, may well become the basis for for an elegant bracelet, or as an independent decoration - a pendant or earrings.

Tools and materials Time: 25 minutes Difficulty: 2/10

• lilac beads 15/0;
• light beads 11/0;
• bugles;
• fishing line;
• needle for working with beads.

Step-by-step weaving instructions

The beaded triangle, as already mentioned, can be used in many ways. For example, in order to arrange motifs into a bracelet, it is enough to connect them together either with beads, or in the process of forming the last row.

Step 1: start weaving

The weaving will go in one thread, so we move the first strung beads and glass beads closer to the end of the piece of fishing line. There are only 3 beads 15/0 and three bugles, which alternate with each other.

To close the string into a triangle, we simply cross the threads in the stringed glass beads.

Step 2: Forming the Corners

Next, we string 11/0 beads, a small bead, and another 11/0 bead and send the thread to the next glass bead. It turns out that a new row with beads is laid on top of the previous one, forming a neat but voluminous corner. This way we decorate all the corners.

Step 3: stringing bugles

The next step is to insert the glass beads between the corners, going along the beaded corners.
Another row - decorating the corners according to the same principle as before, with the only difference being that before sending the thread to the large bead of the previous row, you need to string another large bead. And only after that add three (one large, small and another large). After completing this row, the work is finished.

Step 4: Finish the decoration

In order to make a pendant out of a triangle, you just need to form a small loop of beads at one of the corners of the triangle. with its help you can wear the motif on any chain or cord. In the same way with earrings, you can add a small ring, securing it to the corner with a fishing line, and add a prepared earring to it.

We hope that our master class and pattern for weaving a triangle with beads were useful to you.

This is what our triangle will look like.

For the work we will need two colors of beads, I used Miyuki Delica No. 11, but Czech will also work, a bead needle, nylon thread, a Swarovski heart pendant and a leather cord - the basis for the pendant.

We take a thread 2-2.5 meters long, we will weave from the middle of the thread, the second tail, leaving for the second side of the triangle. We collect 2 beads of a tint color, 13 beads of the main color, according to the scheme: 2basic-13ott-2basic-13ott -2basic-13ott, and connect them into a ring, passing through the first bead.


We collect 2 tint beads and do a Ndebele step, then weave a mosaic according to the main color, on the tint beads again a Ndebele step. So the whole circle.

When finishing the circle, we always pass through two beads of a tint color.


We weave three more circles in a similar way.

Count so that you get 6 pairs of tint Ndebele on each corner. The first half of the triangle is ready.


We move on to weaving the second side of the triangle. To do this, we will use the second end of the thread and weave along the first row, using the same beads. When passing corners, do not forget to take the Ndebele step. If you want to weave a heart into the middle of the triangle, you can weave it in right away. To do this, in the middle of the inner side of the triangle, with the same needle, I weave in several beads.


We pick up the heart, one bead and return to the heart. We do a couple of circles like this.


We weave the second side of the suspension mount.
We complete the series.


Next we weave the second side until we weave all the rows.




Both halves of the triangle will be symmetrical.


And now we break our symmetry and on any side (but only on one), add one bead at a time, and on the corners there is also only one bead.


And this is what the other side will look like.


And now we connect both sides in series.



When sewing the edge, we try to bring both threads to the top edge of the triangle. Now we will immediately begin to weave a transition bar and a tube under the leather cord. Here it should be said that if we weave with one needle, then we will not have symmetry (the bar will go slightly to the side) and therefore we weave with two needles, it is very simple.

We weave like a regular mosaic, and in the last bead we make an intersection of needles. Thus, we will have an odd number of beads in the row, and the bar will stand clearly in the middle.




I don't set the bar high. We spread the threads in different directions, put an equal number of beads on both threads, this will be the length of the tube for the lace.


We weave a tube.


Tried it on. I like everything to fit tightly and not dangle.


And the last push - we sew the tube.


Ready. We brag about the result!

These bright and colorful earrings can be made to match almost any dress or blouse. The color scheme is very different and can be changed. These earrings are a great idea for fashionistas and simply stylish girls!

To weave such earrings, you need to select the necessary colors of beads, it is advisable to take Japanese Delika beads, you can also use Czech beads. You will also need nylon thread, ear wires and a beading needle No. 12.

By taking Chinese beads, you risk greatly spoiling the final result, but if you do not have the opportunity to buy high-quality beads, you will have to carefully calibrate all the beads. Please note that each color of beads should not be different in size and shape, which is very rare in Chinese.

Each triangle is woven using mosaic weaving. More details on the principle of triangle weaving can be found in the article.

This element can later be used not only as earrings, but also as pendants. Increase or decrease the number of rows in the triangle and change the decoration pattern. As a result, you will get something of your own, special and unique.