Sewing slippers at home. We sew cozy and very comfortable house slippers in the “Sudarushka” style

Learn how to make house shoes. It's very simple and easy. Once you try it, you will be drawn into this exciting and useful activity. Basically, we need different shoes for different life situations. One shoe that we wear to work, and it usually follows a certain dress code. Shoes for sports, worn on vacation and, of course, at home, are another matter. And these shoes can be chosen according to your imagination.

rag slippers

The most common hand-sewn home slippers are made from fabric.
The material for them can be found in any home and even a child can cut them out!
Fabric house shoes are the lightest in weight.

glamorous leather flip flops

House slippers are considered a special delicacy,
sewn from pieces of leather.
They are the most durable compared to other indoor shoe options.
Look cool with any home clothes and give it a special shine

felt galoshes

Separately, it is necessary to note the beneficial properties of felt slippers. They are soft and warm, wearable and easy to sew due to their loose texture. They are also believed to be medicinal.

homemade fur slippers

This is a whole professional product. Every family has an old fur coat or hat from which they can construct homemade shoes. You can take worn-out slippers or moccasins that were comfortable in the past, torn, and rip them open. The resulting parts will serve as a template for the pattern.

ugg boots are the best friends for our feet

Do your joints hurt? Sew yourself some homemade UGG boots. They are sewn simply and very quickly from four parts. You can use an old sheepskin coat.
Cut out four parts: sole, heel, front cuff, toe. Sew all the parts together with a thick, strong thread, with the seam facing up. Tuck the top

white fur boots

House shoes, boots, also made with your own hands at home. It is very relevant for people who are constantly cold or have joint problems.

felt booties

Very easy to sew. Outline the child's leg with an allowance of 0.5 cm. Cut out the top and accessories (butterfly, leaves) from different colors of felt. Sew the top to the sole using a sewing machine. Sew a rectangle of Velcro on the inside of the fasteners.

baby homemade chuni

The upper is made of fur fabric inside on a knitted base. Suitable for the youngest family members. Three parts are cut out: a whole part of the side parts of the upper, the toe part of the upper with a tongue, and the sole. Sole made of thick fabric or leather. The rest of the details are made of fur fabric. All parts are sewn together using an over-the-edge seam.

denim house shoes

Looks very stylish. Of course, she is loved primarily by fashionistas and fashionistas. Suitable for all ages. Both young and old will feel stylish and comfortable in them. A pattern is made on paper. It is used to cut out details on the fabric. Dense material is used for the sole and lining. The insole is made of pleasant fabric. All parts are connected according to the diagram and you're done.

fur children's paw slippers

For these slippers in the shape of an animal's paw, the sole is cut out in two copies for each slipper (one is the sole, the other is the insole). To trace your foot with a pencil or pen, it happens right away right on the back of the fur fabric. A strip of 6-10 cm for the cuff is cut out separately. The top of the slippers is cut in one piece. The seam of the upper is made at the heel. The cuffs fold in half. All parts are sewn together.

Patterns with sizes of home slippers master class

It’s quite easy to sew ordinary house slippers using ready-made patterns. They are redrawn to life-size size on paper. Cut out the patterns and trace them on the fabric. Cut out the required number of parts. We start assembling using a standard sewing pattern.

• The upper parts are sewn together with the insole, the upper is blank
• Sew or glue the sole elements, the bottom blank
• The bottom and top blanks are connected with glue and stitched for strength.
• Decoration or fasteners, lacing are attached

sew home slippers using patterns

Use these patterns to quickly create simple slippers. You will need any material for the top and thick material for the bottom. Strong threads and thick needle.

bunny boots, master class

Fun and comfortable bunny boots will warm you up and lift your spirits. It's not difficult to sew and anyone can do it.

• Fabric is selected. The material used for manufacturing is soft and dense, plush, velor or fleece. Leather or substitute for the sole. To give shape, padding polyester (but not necessary).
• Tools are selected. A sheet of paper for a pattern, a pencil, bait needles, scissors and a sewing machine.

• A pattern is made of two/three, if with padding polyester, of the main parts plus ears and a tail with allowances. Halves are drawn on the pattern.
• These slippers have two/three layers of material. Upper velor, middle padding and inner lining
• The sole is made new from leather or cut from an old one according to a pattern
• All parts are cut out from the main fabric.

Pin together the parts.

Stitching of all the details of the layers occurs for each separately.

The ears are sewn together in advance.

Ears are inserted. The finishing seam is made.

This is how the boots turn out from the wrong side.

Turn it right side out and make soft folds on the top of the boots.

The boot is connected to the insole.

This is what one inner layer looks like.

The outer layer is inserted and cleaved with the inner one from the inside out.

It is stitched along the edge, but leaves a small hole unsewn. Through it it is turned right side out.

This hole is then stitched.

The tails are made separately. Two circles are cut out, folded right sides inward and stitched together, leaving a hole. They are turned inside out and stuffed with padding polyester and the remaining hole is sewn.

The tails are located in the center of the back seam.

Then these tails are attached to the bootleg.

This is what happens in the end.

Bunny boot slippers are loved by all family members. Children are the most delighted. They willingly take part in the production of such shoes.

How to cut fur slippers with your own hands, step by step with photos

Experienced needlewomen advise starting to sew slippers with simple slipper models. They can be open or closed from any available material. By making such slippers, you can learn the basics of patterning and sewing house shoes.

The technique is very simple. To begin with, a pattern is made. Using the pattern, the contours of the parts for sewing are applied to the material. For the sole, use dense and thick material. The parts are sewn together and the decorations are attached to the finished slippers. For ease of wearing, a low heel is glued to the sole. This can be done conveniently with a glue gun.

their unique sizes are taken, patterns are made

You will need to take the following measurements from your leg. Foot circumference along the outer edge, length of the top of the slippers along the inner edge, along the outer edge, heel.

Starts with the circumference of the foot. To do this, place your foot on a blank sheet of paper. Old unused wallpaper is used for this.

You can tear out the middle of a notebook into a square. Outline your mark with a pencil or pen. That's it, the soles for the slippers are ready! The heel part of the “heel” is 1/3 of the length of the foot.

Now other measures are being taken. All measurements are taken on the foot in accordance with the already made sole pattern. To do this, place your foot on the pattern of your foot. For the top of slippers. The length of the top of the slippers is measured.

To do this you will need a “centimeter”. The “centimeter” is located from the edge of the big toe on the foot in a straight line to the level of 2/3 of the length of the foot.

The next foot width measurement is needed for the top pattern. This is the width along the inside edge along the rise line.

This measurement is taken to determine the distance from one side edge of the foot pattern to the other. The measuring tape is placed across the instep of the foot.

The pattern piece is slightly shaped, but according to your measurements.

Everyone is ready with personal measurements for future shoes. And according to them, patterns are made according to the sketches of the drawings.

patterns of all parts are made from materials

First, the pattern figures are redrawn “by eye” from photos onto paper. Then they are adjusted taking into account the required dimensions. A paper pattern is cut out with small allowances. Applying it to the leg and finally adjusting it with scissors.

As an example, work is being done for a male model. For women's, simply take a different material, size and add decorations (optional).

For this you will need:
Top part:

• Faux fur. An old fur coat or vest can come in handy here. For the top layer of the top of the slippers (on the left in the picture).
• Batting or a piece of cloth for cleaning the floor (not used), for insulation (center in the photo).
• Thin, pleasant fabric for lining (on the right in the picture).

Bottom, sole.

• Something durable for the soles. It can be a piece of felt, thick and rough leather, or rubber. The sole of an old shoe is used, a little larger in size, so that a part of the desired shape can be cut out of it (on the left in the picture).
• Batting is also used here for insulation; a pad is cut out of it, slightly smaller in size than the sole (centered in the photo).
• For insoles, dense but soft fabric is used. You can use ready-made insoles, which are sold at any hardware store. Buy a slightly larger size and cut it out according to the pattern (on the right in the picture). The size of an insulated pad.

An additional detail is an elastic band 3 cm wide or a synthetic strip of the same size.

To make women's or children's, you need to take the appropriate size, select the appropriate material and decorate with decorative elements.

Step-by-step instructions on how to sew fur slippers with your own hands

The details of the fur slippers are sewn together using a sewing machine or by hand sewing. It will be faster on a typewriter, but exclusive by hand. The choice is yours.

To assemble the parts you will need:

Needles for chopping parts to pin all the parts of the top together.

All three parts are attached together from the wrong side.

The stitched parts are trimmed 2-3 mm along the stitching. The protruding fur and the remaining threads along the edges of all layers are trimmed. It turns out to be a single piece of the top of the slippers.

The elastic tape is placed face down on the front side of the part along the inner edge of the top and stitched.

The sewn ribbon is turned on the wrong side and once again attached with a “multiple zigzag”. Special knit stitch on a sewing machine.

On the wrong side, the ribbon is cut very close to the stitching, at a distance of 2 mm.

The wrong side of the upper part is combined with the right side of the insole from the bottom. The middles of the parts must match.

The side marks are also aligned and secured with needles.

For convenience and even stitching of the parts, they are first swept out.

The insoles are sewn to the upper part. They work from the inside out.

Next, a ribbon is placed face down on the front of the slipper and the edge of the strip is folded.

The tape is attached to the front side of the slipper along the entire circumference using machine stitching

This is what we get in the end.

The tape is turned back to the inside of the slipper and secured with a “multiple zigzag” stitch. The entire upper part of the slipper is made.

The “heel-heel” is glued to the sole with a glue gun.

If the part is not glued very well, then it is heated with an iron, the glue will melt and firmly connect the parts.

In the same way, the sole and insulation are glued from the wrong side. To ensure a strong connection, iron it.

As I wrote above, the insulating pad should be slightly smaller than the sole.

The toe part of the sole is coated with glue and attached to the toe part of the top of the slipper.

In the same way, the back parts of the sole and the upper part of the slipper are glued together.

The final step will be gluing the entire sole to the upper part of the slipper along the entire perimeter. It is recommended to iron the gluing areas with a hot iron for greater reliability. If the slippers are made of fur, then it will snag in these places. But it's not scary. Keep the fur side over the steam for a few minutes and everything straightens out.

So the house slippers are sewn. As you can see it is very simple and fast.

Fur makes warm, soft and beautiful slippers. They are easy to make and can be done by beginners. It is enough to understand the basic points in sewing slippers and you can move on to more complex materials, such as leather.

DIY children's slippers, photo 3 options

Slippers are cut in the shape of animals or cartoon characters. The shape can be in the form of boots or sandals.

corduroy sandals

For these sandals you will need thick corduroy fabric with any pattern for the upper part of the sandals, a piece of thin suede for finishing the edges with piping and for the fastener straps, 4 buttons instead of clasps.

The upper part consists of 2 whole different parts, the binding for the edging and the strap for the fastener. There are button holes along the edges of the clasp. Buttons are sewn on the upper part on the sides.

It is better to make the lower part from three identical parts in shape. Two of which, the sole and insole, are the same size, and the middle one is 0.5 cm smaller around the entire circumference.

A piece of corduroy is cut out for the top (on the left in the picture). The second (in the center of the picture) is made of soft, pleasant fabric for the body, this is for the inner part (lining). Both parts are connected to each other with a strip of suede. Place the pieces facing inward. Turn inside out and steam with an iron.

The middle part of the “loop” is tucked inside the sandal and hemmed. Along the bottom of the resulting top, from the outside, another suede trim is sewn face to face along the entire circumference. Fold the resulting border onto the wrong side of the top of the sandals and hem it.

For the fastener strap, a rectangular piece is cut out, sewn face inward and turned inside out. The ends of the parts are turned inward and hemmed. Slots are made along the edges of the fastener for buttons and the edges of the holes are sewn so that the fabric does not fray.

The upper part of the sandal is connected to the lower part of the sole using over-the-edge stitches made with thick nylon thread.

children's slippers in the shape of Czech shoes

Made from felt or thin felt. Main details: one-piece upper, outsole and insoles. The jumper at the fastener is crocheted from yarn.

The mouse's face is made up of appliqué cut from fabrics of different textures and colors. Each piece is sewn with “felt stitches”.

The ears are made from two circles, a larger one in size and a smaller one of a different color. The eyes are black buttons. The nose is cut out of black fabric and secured with glue. Mustaches made of thick yarn in two colors.

glamorous booties

A sports model for young fashionistas made of felt in the form of sneakers. They are sewn quickly and by hand. You will need felt or felt, two colors. Five parts of the cut: back of the upper, toe of the upper, front part of the upper "tongue", outsole, insole, padding 0.5 cm less than the insole and outsole. Lace and loop strip for decoration.

You need measurements from the child's feet. According to the obtained dimensions, patterns for all parts are made. The contours of the cut details are transferred to the fabric.

How to sew slippers and boots with your own hands, master class

House slippers are women's favorite footwear. They are beautiful and comfortable. They are always warm and cozy. By making such boots, every woman can express herself, and this creates a good mood.

To sew slippers and boots for the house with your own hands you will need:

• Fragments of “wool” or “faux fur” fabric for the main details.
• Cotton fabric (any) for lining.
• Sintepon or batting for filling.
• Felt or other very dense and thick fabric for the sole.

The patterns correspond to foot size 38. To change the size, outline your foot on the sheet, compare the details of the lower part with this sketch and thus adjust it to your size.

all the necessary details are cut out

• Start with the sole. Two parts of the sole are cut out (on the left in the picture), one from felt, the other from thick cotton instead of glass.
• For the main parts, wool or fur fabric is used. The parts are cut out in 2 copies asymmetrically (in the center and on the right in the figure).
• In the same way, parts are cut out from padding polyester for filling and parts from cotton for lining. There should be three sets of different fabrics.

process of assembling boot parts

The house slippers and boots are ready and it takes 1.5-2 hours, no more.

DIY jeans slippers, photo 3 options

Denim slippers are made from old trousers, skirts and bags. First, make a pattern based on your foot for the sole. Any thick fabric or material is suitable for this. Trace around the foot and you're done. Whatever is at hand is used as material. It could be an old camping mat, a thin rubber boat, a car tire tube, etc. Well, they classically use leather, felt, or felt for the sole.

women's denim slides

We used several scraps from old light blue jeans, a piece of felt, and pink satin ribbon for lacing and decoration.

The pattern pieces are cut out from the felt foot in 2 copies. One will be the pad, the other the sole. The same pattern with an allowance of 1 cm is used to cut out denim insoles on the bias.

A bias tape is also cut equal to the circumference of the foot. Cut two pieces of satin ribbon for bows. That's it, the pattern is done. Begin sewing slippers from the top. Fold the two parts with the wrong side together and sew them together with a seam “over the edge” along the rise line.

In the center and at a distance of 1 cm of the resulting top element, slits are made the width of a tape and a distance of 5-7 cm. These holes are processed with a “overlock seam”. A ribbon is inserted into these holes and a bow is tied.

When wearing such slippers, the denim material quickly stretches out and you can use a ribbon to adjust the tightness of the fit to the foot.

Sew the top to the front side of the insole. The top is ready. The edge is processed with bias tape along the entire circumference. The workpiece is glued to the gasket with the wrong side and the bias tape is turned to the side of the gasket and glued.

The top of the slippers is ready. To complete the process, the upper is glued to the cut out sole and that’s it.

Czech style denim slippers

Made from denim, felt, cotton. For fastening, a large button from an old coat. Measurements are taken from the leg. A pattern is drawn according to size.

Five parts are cut out for one slipper: one-piece upper 2 pieces made of Jeans in a mirror image, fastener strap 2 pieces made of Jeans, insole 1 piece made of cotton, lining 1 piece made of felt, sole made of felt 1 piece.

Sew starting from the top. First, fold two strips of the strap together wrong side out and stitch along the edge with an indentation of 1 cm. Make a slot for the button on one edge and overcast it.

The two parts of the top are folded inside out and a strap is placed in the center. Stitched by machine or by hand.

The front side of the insole is sewn to the back of the upper. Glue it inside out onto the gasket, fold the seam allowances over to the side of the gasket and glue it.

At the end of the work, a felt sole is attached to the resulting top. Glued or stitched. Sew buttons on the sides of the slippers for fastenings.

stylish denim slippers

For this model, needlewomen use thick and thin jeans, foam rubber, felt and thick rough leather. The details are cut out according to the contour of the leg: Leather sole
Insole made of thick denim with 1 cm allowance.

• Bias tape length of sole circumference
• Felt pad
• Heel made of foam rubber and thin denim
• Top made of thin denim in the form of triangles four pieces

The upper triangles are sewn together, two folded inside out. They turn out on their face. Part of the foam heel under the thin jeans is sewn to the insole.

The insole with triangles is folded and processed with bias tape. The padding is glued to the underside of the insole and the seam allowances with the tape are turned to its side.
The sole part is sewn or glued to the entire structure. The second slipper is made in the same way.
Triangles are tied on the leg across the width of the foot.

Video: how to sew slippers with your own hands

DIY slippers in 14.5 minutes

Having direct instructions and a pattern, house shoes are sewn in a matter of minutes. It is very practical and suitable for many life moments. Do you need slippers for any purpose, please go ahead and make them!

Video: pattern of children's and adult slippers

whipped up slippers from old jeans

Knowing how to make house shoes is cool! It can come in handy in the most unexpected situations. For example, give a nice gift to a loved one. And it’s pleasant, and convenient, and beautiful.

DIY “Cookies” slippers

Creative flights of thought sometimes produce pleasant products. It’s enough to take a closer look at the old things at home and you’ll definitely find something for making house shoes. Let's say these could be comfortable slippers.

How to sew leather slippers with your own hands, step by step with photos

The most spectacular house slippers are leather ones. They last longer and remain in excellent condition.

They are sewn as simply as other types of house shoes. The only thing here is that you will need slightly different tools and materials. But, all these tools and materials can be easily found in every home.

What is needed for production:

• Faux and real leather. Priority goes to thick flaps. Entry will include old women's bags, used shoes, furniture, old jackets, hats and raincoats.
• Not a thick piece of felt
• Small piece of foam rubber
• Disposable slippers
• Non-woven fabric with adhesive backing
• Shoe glue or Moment or even super glue will do
• Special needle. Thick, curved edge. If you don’t have one, a crochet hook will do.
• Old house slippers for pattern
• For holes in the skin, a punch. If he's not there, it doesn't matter. A thick nail and pliers will do. Using a hot nail on a gas stove, clamped in pliers, you can easily burn the required number of holes.

The work begins with the soles of disposable slippers. Glue all the slots with glue and wait for them to dry.

But while the glue dries, without wasting time, unripe the old slippers in order to make a pattern out of them.

New soles are cut from the soles of disposable slippers using a pattern made from old slippers.

4 pieces of leather sole are required for the outsole with allowances of 1 cm along the contour. For the top of the slippers, 4 parts of the top are cut out, also according to a pattern from old slippers with 1 cm allowances, on the sides at the junction with the sole.

The 2 parts of the top are cut out of non-woven fabric, 1 cm smaller along the entire contour. Non-woven parts are glued through gauze with a hot iron to the front side of the top parts.

To continue making leather slippers, two upper parts are glued together. Coat the edges at a distance of 1 cm with glue and connect. This is done by weight, on the hands to give shape.

After the glue has dried, the parts are trimmed around the circumference with scissors.

The next step is to use a punch (or a nail heated on a fire) to make holes from the edge, retreating 0.5 cm and keeping a distance of 1 cm between the holes. This is done along the line coinciding with the rise of the leg and fingers.

A 7 mm strip of leather is also cut out, threaded through a needle and stitched over the edge going through each hole.

The ends of the leather tape are glued to the wrong side of the part with glue.

Now cut out insoles from felt or felt, 2 pieces. For this, an outsole pattern is used. Additionally, two half-insoles are cut out.

Two “heel” parts are cut out of foam rubber. All these parts are glued together like a “sandwich”.

First, the outsole is glued to it, the insole generously lubricated with glue is glued, then the “heel” is glued under the heel and the half-insole is glued last. This produces the basic blank for the bottom of leather slippers.

Leather soles are glued to this resulting workpiece on both sides. Apply liberally with glue along the contour of the leather parts.

The entire resulting structure dries well. Then the upper part is glued to the lower part along the side lines.

The steps are repeated with punching holes with a punch or burning with a nail. The distance is 5 mm from the edge of the slippers along the entire circumference and 1 cm from each other.

An additional cut leather tape with a thickness of 7 mm is used to stitch the entire edge of the slippers. The next one is glued to the ending leather tape and stitched in this place for strength.

Women's slipper styles are decorated with flower appliqué.

These are the simple and easy steps needed to sew leather slippers with your own hands. Such indoor shoes serve their owners for a long time. Suitable for use in the bathroom and kitchen.

DIY felt slippers, photo 3 options

For greater comfort, coziness and warmth while at home, use felt slippers as house shoes. Sewing them yourself is not difficult or time consuming.

The felt used to make such shoes is made from dried camel, sheep or dog hair. There are many benefits from such slippers, since they are natural.

Well, what is its main benefit, besides convenience, durability and simple manufacturing techniques?

The secret is simple. Felt creates a thermal effect. In this way, spontaneous healing of the leg joints from rheumatism occurs. These shoes help with aching bones. Prevents excessive sweating of the feet.

Wearing felt slippers promotes foot massage. Blood flow increases. This leads to an acceleration of metabolism in the body. It is recommended that old people, children and sick people at home wear only such shoes.

Slippers are easy and quick to sew

The pattern is made from thick felt. The leather sole is cut separately and is 1 cm smaller around the perimeter.

The sole pattern is sewn on a machine or glued with glue using a “straight seam” of leather to the felt pattern at the location of the sole.

It is folded so that there is one seam on the side of the foot. Slots are made with a knife or scissors and a ribbon or lace is threaded into these holes. The end of the lacing is secured with a small bow.

A simple version of felt slippers

It is very easy to do from the point of view of sewing homemade felt flip flops. Made from four parts: two halves for the top and two for the sole.

The soles are made from a sketch created from a pencil outline of your foot. The top is cut out on paper randomly according to the photo. It rests on your leg and is adjusted to your size.

The seam of the top is done using a “overlock stitch”. Next, all the parts are assembled and sewn with hand stitches using a strong thread.

felt sandals

They look very beautiful and fashionable. Not to mention that it is also very convenient and useful! They are sewn from four main parts: front upper, back, insole and sole.

A pattern is made of all parts of the sandals. The insole and sole are glued together with glue. The remaining parts are sewn to the bottom using a cross stitch.

To consolidate the result, the sandals are sewn again using a “loop” seam. An additional element is a felt or felt applique decoration attached to the top of the front of the top.

stylish sandals

The main parts, lining and soles are made of thin felt or felt. After drawing the pattern, cut out the upper parts from the main fabric. This is a one-piece sandal upper, insole and sole. Additional ones are a jumper and a strap for fastening. They are rectangular pieces.

The lining is sewn on a sewing machine to the main part, folding them right sides together. The allowance is cut very close to the seam, leaving 1-2 mm. Turn it inside out and once again sew a “straight seam” along the edge, at a distance of 1-2 mm.

Rectangular patches for straps and jumpers are each folded face inward and stitched, leaving one edge unsewn. Turn the open edge inside out and hem it. Then stitch along the edges at a distance of 1-2 mm on both sides. One edge of the jumper is sewn with a “cross stitch” in the center to the edge of the nose area of ​​the front part. A loop is made from the free end and attached.

The strap for the fastener is made in the same way, but instead of a loop it makes a slot for a button and is processed with an overcast seam. A button is sewn on the sides of the sandals instead of a fastener.
The insole is attached to the upper part with a lining along the contour. Fold the allowances under the bottom of the insole and glue them. This creates a blank for the top of the sandal.

The last step is to glue the felt sole to the sandal blank.

slippers for guests

These slippers can be made for a whole group of guests in one evening. They are done very quickly and easily. Felt material. Sewn by machine or by hand using an overlock stitch.

The pattern consists of two parts: the main one and the insole. The main part is folded and stitched. The insole is placed on the sole from below and sewn with the same seam.

Video: how to make unusual felt slippers

As life experience shows, handwork is not only a profitable activity that gives a second life to outdated and worn-out things, but it is also quite an exciting activity. There are no special difficulties in this work. Tools and materials can be found in any home.

Once you learn the basics, you can make a lot of house shoes. Enough for both household members and guests. You can also provide for all your friends and generally start your own small business. Handmade footwear. Create, wear and give.

Further words from the author
At the request of site visitors, I made a master class: patterning house slippers with my own hands. After all, you won’t always find the right size on the Internet, for example 45, believe me, it’s very simple and faster than searching for what you need on the Internet.

First, trace your foot on a piece of paper; it’s better to do it while standing, so that your foot is completely on the floor.

2.


Correct the pattern: straighten the outer side, connecting the heel and foot, leave a deflection on the inner side, because you will need to somehow distinguish between the left and right sneakers.

3.


Mark on the bottom piece where the top piece will end or begin. This is 1/3 of half a mortar.

4.


Next, place your foot on the outlined foot and measure the length of the upper part from the line, going around the height of the big toe. There is no need to make the top part too long; it will be uncomfortable to wear such slippers.

5.


Next, measure the width of the upper part from the marks to the left and right of the foot and add 2-3 cm, this depends on the density of the fabric; the thicker the fabric for the slippers, the greater this increase.

6.


Now adjusting the pattern. We have positions 3 and 4, this is the beginning of the top part. Positions 1 and 2 mark the widest points on the foot.

7.


Fold the foot pattern in half and draw this half on a new sheet of paper. Marking points 2 and 3 and the middle of the pattern.

8.


Turn over and place on the other side of the middle of the pattern, marking points 1 and 4

9.


Connect points 1 and 4 with a straight line, points 2 and 3 with a concave line - this is the inside of the sneaker.

10.


Cut out and trace the resulting pattern on a new sheet of paper. Fold the first option along the middle line. Mark point 3 or 4 with a cut out triangle - and make marks on the new lower part. From the toe, set aside the data from photo 4, connect point 4 and the set aside segment, mine is 13 cm. Cut it at an angle, we will only need the top piece, we can get rid of the bottom one.

11.


On a new sheet of paper, from the top point along the fold, mark the depth of the part, mine is 13. And from this point to the left, half the measured width of the foot from photo 5. Fold the top points, hold it with your finger and move it to the previously made mark for the width of the top part. Circle everything.

12.


Correct the upper part, set control points so that there are no distortions when connecting the upper and lower parts. Now the pattern of house slippers is ready, and how to sew slippers, see this article. Ugh, it’s very difficult to describe such simple master classes. I hope everything is clear to you! I will be glad if you write about this in the comments under the article.

Here are a few options from the Internet for inspiration.
Cozy slippers to fit, dear needlewomen!

Felt slippers in half an hour

Today I will tell you how to quickly sew warm slippers from felt.

1.


To do this, you will need natural felt measuring approximately 60 x 60 cm, it is sold in construction stores and is used as insulation, you can sew such slippers from colored pressed felt for crafts, a good sewing machine, although it is quite possible to sew it manually with a blanket stitch, if you wish, then leather for the sole from abrasion.

2.

At the end of the article you will find a pattern (size 37 or 45 with seam allowances), my son, having a foot size of 42, sometimes wears such slippers with a sock, so this size does not bother him, I hope you do too. Print the pattern, taking into account that the top part on the pattern has a fold, it is better to cut it out separately already in unfolded form. Draw a pattern with a marker, marking the joints, which are indicated by numbers. Place the parts together and using a thick needle and strong thread in the marked places, make several stitches over the edge so that the parts do not move when sewing. If you want reinforcement with leather, then a piece of leather must first be glued to the sole.

3.


Then join the parts manually or using a machine, moving 1 cm from the edge. When sewing, the upper part should be gathered a little for volume.

4.


Remove the threads used to connect the marks. And very warm felt slippers are ready in half an hour. All that remains is to decorate them, for example, with buttons, pieces of leather or colored threads.

5.


Sneaker pattern

Warmth for your feet, dear needlewomen!

Hello, my dear seamstresses)) Today I will share my experience and baby slipper pattern. As always, I catch myself thinking that I can’t just go and buy slippers for my child, because it’s so simple... But I can’t do it inside)))), I want them so bad sew with your own hands, besides, as a rule, this kind of thing is sewn from applied materials, that is, from what is left in small sections in the bins.

Can sew slippers from old jeans, sheepskin coats, fur, fleece, etc.

I am for these children's slippers I chose the following materials:

• jeans - on the sole
• synthetic winterizer - for insulation

• padding polyester for insulation

Next step:

Then we stitch it on the machine:

This is what you should get:

So give joy to your children and sew such cute ones DIY slippers:

Below I decided to make a small selection of funny and cute faces for children's slippers:

How to sew children's slippers. Pattern for 16-18-19.5 cmHello, my dear seamstresses)) Today I will share my experience and a pattern for children's slippers. As always, I catch myself thinking that I can’t just go and buy slippers for my child, because it’s so simple... But I can’t do it inside)))), I really want to sew them with my own hands, besides, as a rule, this kind of thing is sewn from applied materials, that is, from what is left in small sections in the bins.

You can sew slippers from old jeans, sheepskin coats, fur, fleece, etc.

For these children's slippers I chose the following materials:

jeans - on the sole
fleece - on the top and inside of the sneaker
synthetic winterizer - for insulation

In terms of warmth, these slippers can be compared to slippers made from sheep's wool.
Pattern of slippers for feet 16.5; 18.5; 19.5 cm
I found this good pattern on the Internet:

But it didn’t fit me perfectly, so based on this pattern I made another pattern for the size of sneaker I needed - 18.5 cm. And since I’ve already tested it from my own experience, I can post it for mass use without worry, according to this The pattern of the slippers will turn out perfect.

In order to understand what size slippers you need, place the child’s foot on a sheet of paper, trace it, and measure the extreme points with a ruler. Slippers can be made 0.5 - 1 cm larger than the size of the child's feet.
How to sew slippers with your own hands?
First, let's figure out what these slippers are made of? I need three layers of fabric for the top of the slippers - this is the outer fabric, the padding polyester filler, and the inner fabric. We cut out a part of the upper part from blue fleece, a part from black fleece - a part of the inner part, as well as a part from padding polyester. In total, 6 parts should be prepared for two sneakers:

The sole of the slippers also consists of three parts:

from old jeans we cut out the part that will be in contact with the floor
padding polyester for insulation
black fleece detail for the inside of the sneaker

Then we’ll mentally “layer” the finished slipper into two slippers: one external (made of blue fleece with padding polyester) and the other internal (made of black fleece). First, let's sew the top slipper.
You may also be interested in:

How to sew a skirt from old jeans?

Therefore, we add a piece of padding polyester to the wrong side of the blue fleece, and also apply a padding polyester to the sole part of the gins:

Then we sew the upper part along the seam on the back side of the heel:

Next step:

we pin this upper part along the entire perimeter of the sole made of jeans and padding polyester, joining the fabrics face to face

Then we stitch it on the machine:

And turn out the finished upper part of the sneaker. It is necessary to ensure that the seam is of high quality on the front side, and there is no divergence of the layers anywhere, so that the padding polyester does not stick out.

Using the same principle, we sew an inner slipper made of black fleece:

To carefully sew the sole to the upper part, you must baste or pin along the entire perimeter with pins, since the upper part is cut in such a way that it creates the necessary volume for the leg, but at the same time the upper part overlaps the lower part with little freedom. You will feel it as you sew at this stage.

And so that the upper part is not skewed relative to the sole, it’s easier to baste, so as not to rip it out later (like me))))), I’m not a fan of basting)).

Here….so don’t make my mistakes,….let’s pin together:

Now it's time to sew both sneakers together. To do this, fix them at the top point of the seam on the heel, and place the outer slipper into the inner one face to face:

This is what you should get:

Now attention! It would be ideal to just stitch along this cut, just sew three layers of fabric with one seam, but that wasn’t the case... because then you can’t turn the slippers out...

Therefore, we sew the open cut, but not completely, leaving room for turning any part.

We turn the slipper right side out, and hem the remaining cut by hand or by machine.

This is such a pleasant result)))).

My child was very happy with these slippers; it was especially fun waiting for him when he came up and kept asking: “So? Are the slippers ready yet?”

So give joy to your children and sew these cute slippers with your own hands:

If desired, you could paint some kind of muzzle on them with acrylic paint on the fabric, or sew ears onto slippers, or make something like paws, I just didn’t have time, since my child immediately put them on and ran))).
You might also be interested in:

How to sew jeans for a child from old jeans. Pattern for 2-4 years
Children's sweatshirt for height 92-104. Pattern, sew
Fleece bib with Velcro. Pattern
DIY children's jacket (for height 98cm). Jacket pattern

Below I decided to make a small selection of funny and cute faces for children's slippers:

House slippers should be comfortable, light and soft so that your feet can rest after a hard day at work.

Today, various styles of slippers never cease to delight our female eye. We cannot pass by the beautiful house shoes, which are embroidered with crystal stones, decorated with sequins and rhinestones. Winter versions of slippers fascinate us even more: boots with ears or warm flip-flops with fur. In this article we will tell you how to sew slippers using a pattern.

House shoe models

Today in store windows we can see a huge assortment of house shoes. Modern designers annually update their range of slippers with new types and interesting colors.

House slippers are not a cheap pleasure, so many women are interested in how to make a pattern for house slippers with their own hands and sew shoes using it. But for this you need to decide on the style of the product.

House shoes can be divided into several types:

• flip-flops;
• closed-toe slippers;
• indoor boots;
• 3D house shoes;
• UGG slippers;
• moccasins;
• slippers-socks.

To understand how to make a pattern for house slippers, boots or Ugg boots, closed-toe slippers or indoor slippers, you need to take a few tips:

1. To avoid taking measurements, you can take an old slipper, put it on paper and outline the sole.
2. In order to sew on the edging you will need an awl.
3. As a rule, the sole is cut out of leatherette, split leather or leather.
4. The insole can be cut from cloth or suede.
5. To sew a high-quality and durable product, you need to purchase special nylon threads.

Material for sewing house shoes

To make a pattern for house slippers with your own hands, you need to select the fabric and stock up on everything you need. Material for sewing house shoes should be of high quality and light, for example:

• fleece;
• mahra;
• jeans;
• wool;
• plush;
• suede leather;
• felt.

You can cut out and sew light house slippers or moccasins from denim, felt and suede. Beautiful products are made from fleece, terry and plush. From these types of fabric you can sew any model of house shoes.

How to sew home slippers: felt pattern

To create these house shoes you will need to make a complex pattern. You will need the following materials:

• 0.5 m felt;
• scissors;
• gypsy needle;
• glue from a gun;
• bright floss threads;
• bullseye patch;
• cardboard;
• pencil.

The DIY slipper pattern will look like this:

Manufacturing process:

1. Take a piece of cardboard and place your feet on it, using a pencil to outline your left and right feet.
2. Now cut out the soles with scissors and trace them on the fabric.
3. Cut out these elements.
4. Next we need to create the upper of the shoe. To do this, we again take cardboard and draw two semicircles. The sizes of these parts depend on the fullness and length of your foot.
5. After that, we transfer these two parts to felt and cut them out.
6. You should end up with four patterns.
7. We must sew the upper part of the slipper with the sole.
8. This can be done using floss threads.
9. Once the two elements are sewn together, we can move on to decoration.
10. We must sew a colorful patch to the top of the product.
11. Now, using the same pattern, we sew and decorate the second slipper.
12. Felt house shoes with bright stripes are ready!

How to sew Ugg slippers

Fleece slippers are ideal for sewing such a product; they will be warm, soft and will last you for many years. To create a pattern for home slippers, you will need 1 m of fleece, 0.5 m of suede and 0.5 m of leather. It would be good if these materials were matched to match. You also need the following sewing supplies:

• threads to match the fabric;
• needle;
• scissors;
• glue "Moment";
• centimeter;
• ruler;
• cardboard;
• pencil;
• pins.

Pattern of Ugg slippers:

1. Cut out rectangles 38x20 cm from cardboard for the boot (two parts).
2. We pin the patterns to the fleece, trace and cut out with a 1 cm allowance.
3. We cut out suede insoles 23 cm long.
4. Now we take the leather and cut out the soles approximately 24 cm in length.
5. Using pins, we chop off the upper parts of the boot face to face.
6. Trim the seam allowances, fold the back edges of the boot and grind them down, leaving a hole in the lining through which you will turn the product inside out.
7. Sew the top of the boot from the foot to the top vertically.
8. To ensure that the boots do not dangle and sit beautifully on the foot, we move on to the darts. Make four notches in the places where the product bends (in the area of ​​the boot) and carefully sew them together, trim off the excess.
9. Now turn the outer part of the sneaker right side out, insert a suede insole into it and sew up the hole with a hidden seam.
10. Carefully coat the leather sole with glue and connect it with pins to the foot of the product.
11. We do the same with the second boot.
12. When all the work is ready, take the boots and fold the top of the products.
13. You can embroider these lapels or decorate your ugg boots with ribbons.

How to sew homemade slippers and socks yourself

Making a pattern for house slippers with your own hands is quite labor-intensive and meticulous work. To simplify the task, you can use beautiful terry socks. Thus, you can create original house shoes in just 10 minutes!

For this you will need:

• red terry socks;
• leatherette - 0.5 m;
• glue "Moment" (or glue from a gun);
• decoration (bows, beads and stars);
• scissors;
• needle;
• marker;
• red threads.

Step-by-step guide on how to make slipper socks:

1. The sole should be made from leatherette. To do this, place your feet on the material and use a marker to outline the outline of your feet.
2. Using scissors, cut out the soles and glue them to the socks.
3. After the slippers have dried, you can proceed to decorating.
4. Make a lapel on the product blank.
5. Take a slipper and decorate the side (outside) with a striped bow, right on the lapel.
6. Sew beads a little lower and attach a couple of metal stars.
7. The second slipper should also be decorated in this way.

Using this pattern, you can sew similar house shoes, but come up with other ways to decorate. It all depends on your taste and ideas!

what are the shoes decorated with?

The fashion trend in 2017 was chic fur slippers and flip-flops with fur. The pattern of home slippers made of fur is simple: to do this, you can take an old fur coat from a fox (nutria or rabbit) and cut out four parts according to your measurements - two semicircle tops and two insoles (the process has already been described).

Then we carefully sew the upper parts of the shoes with the lower elements using special nylon threads. We cut out the soles of old slippers from leatherette and glue them to the insoles.

If you want to surprise your guests, you can decorate your slippers in an original way. Here everything will depend on your imagination. You should start from the general color scheme of the slippers; you don’t need to glue a large number of different decorations on them. Everything must be done with taste. For example, after you have made a pattern for house slippers, decorate the product with bows. Attach decorations to the sides of the outside of the boots. So, what else can you decorate your slippers with?

Elements for decorating house shoes:

• ribbons;
• stars;
• zigzag braid;
• floss threads;
• buttons;
• stones;
• embroidery;
• rhinestones.

In order for the decorations to sit firmly on the product and not fall off after the first wash, they should be set with glue or sewn tightly with thread.

House slippers are the same part of clothing as a dress or a T-shirt. Very often, women forget that they need to look no worse at home than on the street. Yes, you don’t have to wear makeup at home, because your skin needs to rest. But being beautifully combed and well dressed at home is the best way to feel like a real woman.

What a lot of work it takes to choose comfortable and stylish shoes! When trying on sandals in a store, for example, you certainly pay attention not only to the height of the heel or stiletto heel, but also to the strength of the materials, color, and design. Why is it that only some women treat the choice of house shoes with the same trepidation? We don't encourage you to walk around the house in stiletto heels (feet need rest too), but beautiful and comfortable house shoes are not a fantasy. We previously wrote about how to make unusual bunny slippers, now we’ll make others beautiful handmade slippers.

The selection of indoor slippers in stores is not encouraging with the variety of styles and materials. As a rule, most models look like ordinary flip-flops made of soft fabric with rubber soles. Even if you choose beautiful and comfortable clothes especially for home, such slippers will definitely ruin your entire look.

What to do in such a difficult situation? Sew beautiful slippers with your own hands. You can sew your first slippers to master the technique. But don't stop there. After all, handmade home slippers will be a very original gift.

Master class: beautiful DIY slippers

What you will need to make beautiful slippers with your own hands:

• fabric of two different colors (it is best to take fleece or cotton - it depends on how you see your slippers),
• felt (we will make the sole from it),
• threads in the color of the fabric,
• basting pins,
• printer (for printing the template),
• scissors and good mood.

Step one

Print the template using a printer (see below). You will need to increase or decrease it based on the size of your feet. Then we cut out the parts of the required size from paper.

Step two

From the fabric that will be on the outside of the slippers, cut out 4 foot pieces (two for each slipper). We cut out the second piece from the same fabric. To do this, you will need to fold the fabric in half and place another piece on it so that its wide edge is at the fold. You will need 2 of these parts.

Step three

From the lining fabric (the one that will be inside the slipper) we cut out 2 parts of the second piece in a similar way. You will also need 2 foot pieces cut from felt.

Step four

We sew the details. Combine 2 pieces from different types of fabric so that they lie facing each other. Sew them together along an internal arc.

Step five

Turn the lining fabric outside and secure with pins around the perimeter.

After you have fixed the fabric, carefully turn the workpiece with the outer part facing out. Take one of the foot blanks (from the main fabric) and pin it to the resulting slipper blank. Sew around the perimeter.

Step six

Place a felt base under the slipper and sew it on. To make your sneaker look beautiful, the base needs to be hidden. Therefore, we cover the felt with another blank and stitch it around the perimeter again. You can carefully trim the protruding edges of the fabric or sew them together with a blind seam.

Step seven

Decorate your slippers with beautiful bows made from a different material. You can use ribbons, flowers and even beads. It will not be difficult for needlewomen to knit small flowers and sew them onto such slippers. Beautiful embroidery, for example, with the name of the person who owns these stylish and cozy shoes, will be especially chic.

Option number 2: beautiful DIY slippers

Sewing such slippers will require a little effort on your part, but your feet will be delighted with the comfortable and beautiful slippers.

If you decide to give such slippers to a relative or friend, you will definitely make her happy with such a gift. For little princesses, you can sew shoes in bright colors with an interesting print so that they don’t forget to put them on and don’t walk on the floor barefoot.

You can combine different colors and materials from linen to faux fur. Try to use a material for the sole that will not slip.

Such an original gift will show how much you care about the person. And the owner of the slippers will remember you with kind words every time the beautiful slippers warm her feet.