Beautiful set: hat and scarf made from sectional yarn. Sectional yarn Women's hats made from sectional yarn, knitted

At first glance it may seem that crocheting a hat is very difficult, but it is not so. Of course, knitted hats look much closer to store-bought clothes, but this is their drawback. It may be a little more difficult to crochet a warm hat, but you have more room for imagination.

Crocheting hats can be divided into several parts:

• Choosing the right model
• Selection of hook and yarn
• Taking measurements
• The process of knitting a hat

Let's start with selecting a model. Do you need a warm hat for fall/winter or a light one for spring? Do you like pom-pom hats, berets or beanies? Based on this data, we look for the model we need:

• Crochet beanie hat
• Crochet beret
• Hat with pompom

Taking measurements for crocheting a hat

1. AB – depth of the cap, measured from the forehead to the neck (from the eyebrows to the beginning of hair growth).
2. CD – cap height – measured from one ear to the other through the crown. This size needs to be divided in half.
3. Head circumference (head circumference) - measured along the line of the forehead and the protruding part of the back of the head. This is your hat size (for adults from 54-62 cm).

In accordance with the measurements taken, you can start knitting a hat. But, if you have a model at hand, or you are knitting for yourself, then the easiest way is to try it on one more time and not bother taking measurements.

Now you need to choose the right yarn. For a winter hat, we recommend using wool blend yarn or acrylic. A hat usually only needs 1-2 skeins, so don’t skimp on yarn. It is better to take imported yarn, because... it is softer and does not make your head itch. If you are allergic to wool, then buy cashmere. 100% cashmere yarn is very expensive, so choose yarn that contains at least 50% cashmere.

If high-quality yarn in your stores is very expensive, then sew a lining from fleece for a winter crocheted hat or from knitwear for an autumn hat.

For a light spring crocheted hat, you can buy yarn with a cotton composition, at least 50% cotton and 50% acrylic will be enough. Choose the thickness of the yarn depending on the size of the hook.

How to choose the right hook for the yarn when crocheting hats

Take the thread and lightly twist it in half. The thickness of the twisted yarn should be equal to the thickness of your hook. It is best to start by knitting a small sample of 10*10 cm and see how the yarn behaves and whether the selected pattern is suitable for it. Sometimes you think you've found a really nice crochet hat, but your yarn just isn't right for it.

And finally, we want to say that the easiest way to crochet a hat is according to the pattern, but sometimes it’s enough to look at several dozen models to understand what exactly you want and start knitting. We have prepared a selection of crocheted hats from our readers to make it easier for you to decide. Knit for your health!

Crochet hats. Works from our readers

Hat size: 54-55 cm. Materials: Yarn: YarnArt, SHETLAND, 45% VIRGINWOOL, 55% ACRYLIC Hook No. 5. Basic knitting: convex and concave double crochets (inc 1n, inc 1n) Legend: Chain loop – ch Single crochet - sbn Double crochet - d1n Convex double crochet

The hat is crocheted from Vita Unity Light yarn 100g/200m with a crocodile skin pattern. Yarn consumption 130g. Size 54-55 cm. Hook No. 4. The pattern has long attracted the attention of needlewomen and does not seem “hackneyed”. The pattern looks especially beautiful when

Spring set White Cloud, which consists of a hat, snood and mitts. Work by Ksyusha Tikhonenko. It took me a long time to select a pattern, the first 2 options were started and unraveled, the third option made me very happy, it was knitted slowly, but the result was worth the time spent.

A warm set for a girl consisting of a hat and a snood, knitted from Alize Burcum Nokta+ Kartopu Firenze Tiftik. It took almost 3 skeins of Alize acrylic, a little more than one skein of Kartopu mohair. Crocheted 3 mm. Beanie hat with

A set for girls and women, consisting of a hat and an openwork scarf “The Snow Queen” is crocheted from “White Leopard” yarn with a very beautiful three-dimensional “popcorn” pattern using crochet no. 3.5. The scarf is knitted with an openwork fan pattern. The kit is very

Good day everyone! I present to you my work - a set consisting of a winter hat, scarf, and mittens “Little Red Riding Hood”. The set took 4 and a half skeins of yarn “Olga” (50% acrylic, 50% wool, 100 g. 392 m.), color “Carmen”,

Dear needlewomen, I want to show you a hat that I came up with as a gift for the New Year. It knits quite quickly because the threads are quite thick at 100g/100m, I used hook No. 7. First, tie a ribbon lace according to the volume of the head (I

A set consisting of a beanie hat and a snood is crocheted from Alize Lana Gold Fine yarn 100g/390m in 2 threads. Yarn composition: 49% wool, 51% acrylic. In total, the set took 3 skeins. The lining of the cap is knitted from another

Coral set. Here is a set consisting of a hat and scarf that I knitted for myself. The yarn I used was Gazzal Baby Wool, I really liked the thread, it was soft and warm, the composition was 40% merino wool, 40% polyacrylic, 20% cashmere. Crochet hat, description: Crochet hat

Owl hat is knitted from mohair ANGORA GOLD yarn (10% mohair, 10% wool, 80% acrylic), 550 m, 100 g. Knitting in two threads, hook 3 mm. The eyes are an incomplete circle of concave and convex columns with

I found the hat pattern on the Internet. The pattern is very simple and easy to knit, so I knitted everything together very quickly. I knitted the scarf myself, without a pattern. I wear it with pleasure. Yarn - 25% wool, 75% acrylic. Knitting pattern for a hat:

Set for a girl or girl "Rainbow"! Autumn is just around the corner. Simple to implement, accessible even for beginners, but incredibly positive and convenient!!! The stocking cap is knitted with a double stitch (one third longer than a regular hat) according to any of the proposed patterns,

Hat size: 54-56. Knitted to order with crochet No. 2 from wool blend yarn 340m x 100g. in two threads. Consumption is about 50 g. If you add a lining to it, you can wear it in winter. I already knit and wear this pattern

Winter knitted women's hat “Chocolate Shells” is knitted from sectionally dyed “Cashmere” yarn, 100% wool, 100g/300m. The knitting is voluminous, with twisted columns. It took more than 100 grams. Separately about twisted columns. Broken hook, two days of free time and wasted nerves

Cute crochet hat in an hour. Elena's work. Necessary materials: hook 5 (for elastic), 5.5 (for main knitting), 100% acrylic thread 100g. DESCRIPTION OF THE HAT: We knit an elastic band: cast on 7 loops and 1 lifting loop, unfold the knitting and knit a row of dc,

Hello! My name is Samoilova Natalya. I want to please you with my new product. The cap and stole are crocheted using the FreeForm technique. Author's work. Pekhorka threads Crossbred Brazil 500m in 100g, Pekia PERA 460m in 100g and angora meter

Crocheted hats - polka dots - the work of Tatyana Belenkaya. Alternating rows: 2 pink, 1 brown. Increases in rows 4 and 10. There are 28 rows in total. In the last row, instead of 5 double crochets, there are 3. The headband is an elastic band knitted from embossed

Scarf, hat and mittens "Winter-winter"

My name is Natalya Samoilova. I present to your attention my small work “Winter-Winter”. Freeform technique. The scarf is knitted. Flowers and squiggles are crocheted on the scarf. The mittens are also knitted. The elements on the front are crocheted and sewn.

Rasta-style hats and berets are the work of Tatyana Sakadina. Tatyana writes that she simplified knitting as much as possible to make it easier to knit and count stitches. All hats are knitted to order - it turns out that the Rastafarian style is very popular now!! I'm starting berets

Crochet hat "Unusual flower"

The knitted hat "Unusual Flower" has a classic shape, and the noble brown color makes the knitted hat suitable for ladies of any age, from very young to elegant women. I love knitted hats that don't rely on...

It is known that women and girls who wear glasses find it very difficult to choose a knitted hat. But in the conditions of our harsh Russian winter, a headdress is necessary and we must try to choose a style of knitted hat that will not only not spoil your

Hat with a flower - the work of Olga from Irkutsk. Hat size: 56-57. To knit a hat you will need: 100 g of white yarn (50% wool, acrylic 50 96, 280 mx 100 g) and 15 g of fuchsia yarn

"Poppy cap" crochet

“Poppy cap” work by Marina Anatolyevna Glyzina for the “Red Poppy” knitting competition. To knit the hat, Marina Anatolyevna used “Coco” threads in black, red, and green colors. Hook No. 2. There is no scheme as such. For the hat I dialed 3

Winter hat "Pink Miracle" (double, with knitted lining) - author's model by Tatyana Videva (Tani) from Estonia from Tallinn. Knitted hat size: 54/55. Materials: wool 75 gr., cotton 25 gr., hook No. 2.5. Description of work: We knit the top hat. Dial 132 air

Crochet hats. Models from magazines

Cap size: 56-58 cm. You will need: 50 g each of Vista yarn and viscose silk; some dark yarn for finishing; hook No. 2. Tie 1 circle with a diameter of 15 cm according to the pattern. Then continue knitting without increasing

Are you planning to make a splash at the resort? Forget wide-brimmed hats. Better knit a pair of fashionable berets or hats. They will look good with both dresses and shorts. You will need: VIOLET yarn (100% cotton) -

Transformer idea from the design studio "CROCHET". This is a thing from the “pants turn into...” series, only in our case, but the role of “shorts” is played by a hat. Having placed in a circle several ways of wearing this hat, which even a novice knitter can knit, we

The simple-shaped hat looks original and stylish thanks to the “elongated loops” pattern that imitates fur. Size 56. You will need: 200 g of lilac wool yarn; hook number 3. The hat is knitted with a pattern that imitates fur, the long loops of which are made along the fabric

Crochet hats. An original white cap, in which ruffles are knitted along the fillet mesh base, creating a wave. Size 56. You will need: 150 g of fine mohair yarn (500 m x 100 g); hook No. 2. Tie the cap of the cap (total height

Knitted hat size: 56-57. You will need: 150 g bouclé melange yarn; hook No. 5. Description of work. Cast on 3 VP (chain loops) and in the 2nd loop from the hook, tie 3 sc (single crochet), 3 half double crochets and 4

Size 56. The model is crocheted and trimmed with fur. You will need: 50 g thick black yarn; fur strips approximately 1 cm wide; hook No. 4; hat elastic 80 cm; fur trim pompons 7 pieces; 2 fur tails; 2 metal

The hat is made in garter stitch in circular rows of sectioned yarn with a decorative button detail

Design by Berit Ramsland

(translation from English)

Size

Circumference approximately 50 cm

Materials

Nordlys yarn (75% wool, 25% polyamide) 350 m / 100 g - 1 skein

Circular or double pointed needles 3 mm

2 buttons

Knitting density

28 stitches = approximately 10cm in stockinette stitch using 3mm needles. Check the knitting density.

Description

Using 3 mm needles, cast on 150 stitches. Work in turning rows in garter stitch for approximately 6cm, then cast off the first 10 stitches and continue in circular rows in garter stitch. When you have knitted approximately 23cm from the cast-off row, begin decreasing to form the crown as follows: *k12, k2tog*, repeat *-* to end of round. Repeat decrease row every other round until there is 1 stitch left between the last decreases for a total of 14 stitches. Cut the yarn leaving a long end, pull it through the remaining loops and pull them off. Secure the end of the yarn to the wrong side.

Secure the free edge by sewing 2 buttons on the front side, as shown in the photo.

LOOK AT MODELS FROM THIS SAME SERIES

1 2 3

Knitting description: paid

About the product:

Probably for the first time I approached the selection and calculation of the model in such a way as to emphasize the long-section dyeing of the yarn. Previously, my omission was that I did not fully use the beauty of transitions. Everything worked out perfectly here. I even managed to close the canvas into a circle without disturbing the transitions. The hat stretches a lot due to the specifics of knitting, so the size is limited by the lace in the circle. Despite the complexity of the color combination, I found the “ideal” ribbon in my supplies, which, theoretically, would have lasted a very long time without proper use.

I had this yarn lying around for a very long time... I once bought it as a fashion trend, as an interesting new product. Since I only knit headdresses, I had to find an appropriate use for it. I got it out like this - the hat looks like astrakhan fur. During the process I had to think about the finishing to hide the shorter sections on the bouclé yarn. I tied the laces on a mechanical lace braid, tied them into chains and sewed them in the form of decorative curved lines. It is almost impossible to repeat exactly such a hat, since the yarn was placed so accidentally - with a different size of the product there will be no stripes for the laces.

Knitting description: free

About the product:

This is one of those cases when the product is completely matched to the yarn. Here it was necessary to emphasize its ribbon structure and melange coloring. Loops at the top were ideal as they allowed the yarn to open up completely and pieces of different colors to fit into separate loops. The lower part is connected with a spring elastic band. Thanks to this solution, it was possible to avoid the roughness of the thick yarn fabric. A long scarf is added in the same style. It has two buttons with loops so that it can be connected into a circle after wrapping it around the neck. The buttons served as an appropriate finishing touch and highlighted the colors of the yarn.

Knitting description: free

About the product:

I linked it almost four years ago, but, deprived of my attention, it was collecting dust on my computer. Naturally, this kit does not pretend to be universal. Not for every taste and clothing style. But I’m pleased that I was able to achieve my goal with it - the use of a specific yarn (for knitting ruffle scarves) in a headdress. From the remaining yarn I decided to knit a collar collar with a clasp. The principle of attaching the yarn ribbon to the warp is different. In a hat, this means picking up the mesh during the knitting process, and in a scarf, tying the mesh onto the finished fabric. This was a new discovery in the technique of knitting similar yarns by me.

Knitting description: paid

About the product:

Name due to color associations. And the strip also resembles the road along which excursions are conducted)) Another attempt to successfully attach melange yarn. Of course, only simple patterns are suitable in this case. Initially, I wanted to knit the entire hat only with melange, adding a pattern of flowers on the brim as well. But the flowers got lost in the ripples and I had to add a solid color for them. I decided that brown of the three colors was the most suitable for insertion, since it has the most contrast. Although I would really like to see a hat with a white insert on a pink and lilac melange. And in a completely monochromatic light version, the pattern would be more clearly visible.

Knitting description: paid

About the product:

I continue to pull loose ends out of the hole and look for a successful ending for them. I knitted the boucle top a very long time ago. Then there was not enough companion thread, and then I put it aside and never got around to it. True, I planned to decorate the product with lilies of the valley. And then I thought about how much painstaking work there was with them, and decided to once again embody my very favorite flower with, for which I didn’t draw a diagram then. Made some changes, including the color scheme. They wanted to add richness of color to the product and emphasize the pleasant melange of the main part of the canvas.

Knitting description: free

About the product:

I decided to attach a ball of bouclé yarn. The design on it is practically invisible - so I limited myself to a standard smooth canvas. I thought about decorating with roses, but something didn’t work out. The result is a voluminous decorative runner that allows you to wear a hat with both romantic and sporty clothing styles. The thickening of the fabric at the back, unfortunately, stands out. But this fold under the back of the head better keeps the hat from sliding forward. And the best thing about this model is that it’s easy to stretch more fabric over your ears, since there is plenty of it on the sides. And the lapel warms the ears well.

Knitting description: paid

About the product:

I think I’m not the only one... I get excited about buying yarn with a beautiful combination of colors, and then I struggle with how to use it successfully. It looks gorgeous in a ball, but in linen it most often ripples and loses all its color appeal. I settled on a lush pattern, as it favorably emphasizes the melange of the thread and provides increased yarn consumption, which was also my goal. To shade and enhance the colors, I knitted the bands in a single color. A flower with a displaced center has been gathering dust in my sketchbook for years, and it finally came to fruition. The pattern on the petals reproduces a fragment of the pattern of the beret's body.

Knitting description: paid

About the product:

I still have a small ball of melange yarn left, which would probably have been lying around for many years. Therefore, I decided to put it to work to the end - to make a decoration to complement a set of two hats. The flower was made in a style that suited them. But, by the way, it is perfect for the “Alicia” hat from. For the headband I chose a pattern, thanks to which it stretches well and emphasizes the melange of the yarn. The name is an eastern female name, the meanings of which include “radiant” and “flying bird”. In my opinion, it is quite accurate in terms of color and pattern.

Knitting description: free

About the product:

It all started with an incomplete skein of melange yarn. I knew that in the future I wouldn’t knit with this color anymore, and I decided to add it without leaving any traces - that’s how the spirals appeared. At first I planned four squares on the header, in which there would be small bouquets. But I didn’t take into account that they would merge with the colored spots on the canvas. And the hat hung up and lay there without decorations for three years. But then the inspiration came to finish the loose end, especially since all the shades of melange colors were found in the hamster’s supplies. And, as always, I made sure that the pattern on the hat matched the decoration. Spirals can be hung in different places if desired.

Knitting description: paid

About the product:

I know, I know... if you want the pattern to be visible, well, you shouldn't use melange at all. But I’ve had this skein for so long, and I like the colors in it so much that I really wanted to finally put it into use. And without a pattern, knitting is simply boring. From my old sketches, I chose a pattern that would stand out as clearly as possible against the ripples of color, and in the process I decided to add a hat and ears to the theme of the main pattern. By the way, they can be knitted longer - like with earflaps. Its coloring is very reminiscent of spring. But still, melange most often looks much richer in skeins than in the product.

Knitting description: paid

About the product:

I have a soft spot for sectional yarns, even though they are much more difficult to adapt successfully. Often the pattern is completely lost, but not in this case. When contemplating the hat from afar, the effect of color transitions predominates; up close, the effect of the relief structure prevails, especially if the light falls from the side and each relief stripe leaves a shadow. The smooth fabric between the groups of stripes emphasizes the color gradient. The hat reminds me of waves in a storm - a dark overhanging sky, black water in places. The pattern and pendant in the shape of a dolphin successfully complete the look. The hat is knitted for my first-grader son.

Wonderful autumn hat and scarf set can be knitted from section dyed yarn Angora Gold Batik. The hat and scarf are knitted in stockinette stitch and decorated with crocheted “butterfly” motifs.

To knit a hat and scarf set you will need:

yarn Angora Gold Batik No. 3368 (10% Wool, 10% Mohair, 80% Acrylic , 550 g per 100 m) - 2 skeins,
knitting needles No. 4, hook No. 3.

Knitting pattern for the set:

KNITTING TECHNIQUES USED: STAIN STITCH, SCITCH CARRIET, CHAIN ​​LOOP

SCARF: 1. Cast on 15 stitches and knit in stockinette stitch.2. Knit by adding 1 loop on each edge of the fabric and on both sides of the central loop (thereby adding 4 loops in each row).3. When there are 210 loops, close them and complete the work.

A CAP:1. Cast on 120 loops and knit 5 cm with 1×1.2 elastic. Continue knitting in stockinette stitch. At a total height of 23 cm, continue knitting, knitting all the loops in pairs in each front and back row until all the loops are completed, then perform the side seam of the hat.3. Along the transition line from the elastic to the front knit, knit a chain of air loops, securing it to the transition line every 9 cm. Knit long loops from the chain and knit them together.

BUTTERFLY MOTIF FOR EDGE DECORATION:1. Start knitting the first wing by knitting a chain. To do this, knit 3 chain loops. Knit a long loop inside the ring and fasten it. Thus, fill the ring with 3 long loops. Knit 3 chain loops again and knit a connecting stitch from the starting point. 2. To move to another motif, knit a chain of S chain stitches.Z. For the second butterfly, knit a chain of 5 air loops and fill with 5 long loops (together with the chains you will get a total of 7 elements).4. To move to another motif, knit a chain of 5 chain stitches.5. Knit a chain of 7 chain stitches and fill with 7 long loops.6. To move to another motif, knit a chain of 5 chain stitches.7. Knit a chain of 9 chain stitches and fill with 9 long loops.

One size

YOU WILL NEED

Yarn (51% natural wool, 49% polyacrylic; 100 m/100 g) - 200 g each of orange melange; hook No. 8; 1 apricot-colored fur pompom (diameter 15 cm).

BASIC PATTERN

Knit in rows in forward and reverse directions. The number of loops is a multiple of 4.

1st row: 3 initial vp, then knit st. s/n.

2nd row: 2 initial vp, * 2 relief stitches. s/n behind the front wall (= st. s/n, while inserting the hook in front around the st. s/n of the previous row), 2 p/st., from * repeat constantly, finish with 2 embossed sts. s/n behind the front wall, 1 p/st.

3rd row: 2 initial vp, * 2 relief stitches. s/n behind the back wall (= st. s/n, while inserting the hook from behind around the st. s/n of the previous row), 2 p/st., from * repeat constantly, finish with 2 raised sts. s/n behind the back wall, 1 p/st.

4th row: 2 initial vp, * 2 p/st., 2 relief st. s/n behind the front wall, from * constantly repeat, finish 3 p/st.

5th row: 2 initial vp, * 2 p/st., 2 relief st. s/n behind the back wall, from * constantly repeat, finish 3 p/st.

Perform rows 1-5 once, then constantly repeat rows 2-5.

How to knit embossed stitches

RUBBER

Knit in circular rows. The number of loops is a multiple of 4.

1st round: 3 initial vp, then knit st. s/n, finish 1 connection. Art. to the last initial ch.

2nd and all following circular rows: 2 initial ch. instead of 1 p/st., * 2 relief st. s/n behind the front wall, 2 p/st., from * constantly repeat, finish with 2 embossed st. s/n behind the front wall, 1 p/st., 1 connection. Art. in the 2nd initial ch.

KNITTING DENSITY

7 p. x 5 r. = 10 x 10 cm, knitted with the main pattern;
7 p. x 6 round. = 10 x 10 cm, tied with an elastic band.

SNUD

Make a chain of 24 vp. + 3 v.p. rise and knit with the main pattern. After 170 cm from the starting row, finish the work.

Sew the short sides.

A CAP

Make a chain of 36 vp. and close into a ring using 1 connection. Art. Continue working with the rubber band.

To give shape, after 14 cm from the initial row, constantly knit p/st. together = 27 loops. In the next 2nd circular row, constantly knit relief stitches. s/n together = 18 loops.

Finally, knit 2 more circular rows in st. s/n, while in the 1st circular row constantly knit 2 tbsp. s/n together.

After the 2nd round, thread the working thread through the remaining 9 loops, tighten the loops and secure the thread.

Tie the edge of the hat in 1 circular row in a “crawfish step” (= st. b/n, perform in the direction from left to right).

Attach the pompom.