Correction of extended nails with gel step by step. Correction of gel nails: step-by-step instructions

Nail correction is an important stage of manicure. Over time, the plate extended or painted with shellac grows, causing any design to become distorted and sloppy. To fix this, it is not at all necessary to completely remove the gel or acrylic, just correct the shape or pattern.

Types of correction of extended nails

All types of correction are classified according to the complexity of the work:

• Small. Least labor intensive. Includes minor editing of the drawing or filling in cracks. It is also required if the nail has been slightly damaged mechanically (its edge has been trimmed or the varnish has worn off a little);
• Average. This is the re-extension of an artificial plate on top of a natural one. It looks natural after any manicure. Includes painting and finishing a “fresh” edge;
• When a nail breaks, a complex correction is made. If the model breaks the plate or wears off the polish, the master repeats the manicure procedure on one or more fingers. The same type of work is used to deform the coating.

If the correction of overgrown nails is a natural process, then the correction of broken or cracked plates is a necessary measure. To avoid this, simply handle them carefully, try to minimize exposure to household chemicals and do not test them for strength.

Step-by-step instructions for correcting nails with gel

Correction of gel nails at home includes:

1. Removing old material;
2. Shaping;
3. Removing overgrown cuticle;
4. Manicure with gel polish.

Let's look at each stage in more detail. To remove old gel polish It is most convenient to work with a router. Of course, you can use special solvents or file away the biogel, but this is an atavism.

A milling cutter is a special machine that is used during manicure, nail extension and correction. Includes attachments for filing, polishing, and smoothing uneven plates. The cutters allow minimal trauma to the plate and remove old varnish much faster.

After this, use a nail file or the same nails given the desired shape. It is important not to leave too thin edges, otherwise they will easily break even with everyday use. For beginners, it is best to limit yourself to the classic semicircle.

Now the nails are soaked in the bath to soften the cuticle. The skin itself is moved from the plate into a hollow, where it is cut out with nippers or scissors. You can also buy a cuticle softener, which will allow you to remove it without cutting tools.

Step-by-step instructions for correcting nails with shellac at home (plus photos):

It is important to note that the technique for working with single-phase gel is almost identical, with the exception of speed. This type of nail design and correction can be done many times faster than with regular shellac. That's why it's called express technology.

Correction of acrylic nails

Before correcting extended nails with acrylic, it is important to prepare everything tools:

• File with coarse grain (wide, optimally 100x100);
• Cap for monomer (a product is collected into it to avoid overconsumption);
• Powder;
• Degreaser, primer;
• Acrylic;
• Brushes and pipette.

You can use regular alcohol or any alcohol-based tonic as a degreaser - they have the same functions. Also, before correction, the old varnish is removed and the nail is slightly filed.

Step-by-step instructions for beginners with a video on how to correct nails with acrylic:

Video: Correction of gel nails (nail design lessons)

Many modern ideas for correcting acrylic nails include the use of gel polish. Outwardly it looks very natural (if the correct length and shape are chosen).

Laser correction of ingrown toenails

A separate topic for many girls is the correction of ingrown nails with a laser device. This technique appeared relatively recently, but quickly became the most effective in solving this problem.

An ingrown toenail is an unpleasant and dangerous phenomenon. For example, if it grows into the leg, it can cause gait distortion or injury. For some time, a pedicure on the foot can save you from it, but often the effect lasts for less than 2 weeks.

How to perform laser correction of a toenail step by step:

1. The technology includes exclusively medical intervention. You shouldn’t expect them to give you a pedicure or file a plate – this is what beauty salons do. First, you will need to fill out some paperwork and choose a suitable painkiller, then, together with your doctor, decide on the type and strength of the laser beam;
2. Pain relief can be carried out with lidocaine subcutaneously or using special creams (ointments);
3. The skin ridge is removed first. It is this that is the main cause of improper growth of the plate. The doctor simply burns it out with a carbon laser;
4. Under the ridge there is almost always a process, which is the main cause of ingrowth. It is adjusted using tweezers and supported with gauze turunda for fixation;
5. The treated area will require special care for several days. If it’s summer outside, it’s important to avoid dust and dirt, and also avoid swimming in open water; if it’s winter or autumn, it’s recommended to wear loose shoes.

The average price of laser correction is $10 per session. To find out exactly how much a procedure costs, you need to consult with a doctor personally, demonstrate the scope of work and choose the optimal treatment option.

Extended acrylic nails are the accent that emphasizes a woman’s manicure. Manicurists come up with a variety of designs: with rhinestones, with sparkles, with sea sand, and ladies are not inferior to them and come up with their own compositions. When the skill of extension has already been mastered, you need to know how to how to correct acrylic nails at home.

The nail correction procedure is a set of measures that allow artificial nails to look aesthetically pleasing. Correction of acrylic nails, along with correction of gel nails, is an equally important procedure, the frequency of which depends on the speed of your own nails.

Accurate frequency of the correction procedure difficult to name, but On average, correction is carried out once every 2-3 weeks. Even if your nails have been growing slowly, it is likely that after acrylic extensions they will begin to grow faster, since the acrylic material heals the plate and stimulates its growth. You can understand exactly when correction is needed by the gap formed between the cuticle and acrylic.

A timely correction prevents the material from premature deformation, ensures high stability of the artificial nail and eliminates unnecessary time and material costs that a late procedure may entail.

The nail correction procedure is necessary due to the further growth of the natural nail.. The hole area gradually grows and does not look aesthetically pleasing without the material. At the same time, the tip of the nail becomes longer, which means it can break off at any moment.

Signs of poor quality correction

If all the conditions necessary for correction are met, no peeling or removal of the material will be observed. On the contrary, peeling indicates either that this material should not be used, or a violation of the technological process. A detachment of 1-1.5 millimeters is considered normal. Possible reasons for this problem may be:

• Careless handling of nails
• Free edge length too long
• Consequences of antibiotic treatment
• Aggravated chronic diseases
• Exposure to household chemicals
• Failure to comply with technological rules during expansion or correction.

Before you start, don’t be lazy to visit a specialized store and buy:

• Acrylic remover
• Coupling agent (primer)
• Acrylic
• Degreaser
• Set of files for polishing nails
• A brush.

These materials can be purchased either as a set or individually.

When carrying out work on nail correction, it is necessary to comply with existing technological requirements, and in no case deviate from existing requirements and rules, performing steps step by step.

• Treat your hands with disinfectant. It will not be superfluous to disinfect work surfaces that your hands will come into contact with.
• Remove the varnish layer with a liquid without acetone.
• Treat the cuticles with a special product to soften them. After 1.5-2 minutes, use a wooden stick or a medical steel spatula to remove the pterygium from the natural nail plate.
• Use a lint-free cloth to remove any remaining product applied in the previous step. Using a nail file, remove the free edge of the nail and give it the required shape. You will need to cut off 2/3 of the thickness of the material.
• Remove shine from the surface of the natural nail. This must be done for better contact of the nail plate with the acrylic.
• Use a fine abrasive file to treat the peeling areas.
• Remove the dust obtained from filing and treat the part of the nail where there is no acrylic with a degreasing agent.
• Treat the nail plate with a primer that combines the artificial material and the keratin of the natural nail.
• Model your nails. When doing this, please pay attention to:

1. acrylic did not penetrate the skin in the cuticle area or lateral sinuses
2. acrylic was applied evenly everywhere
3. the extension brush contained only natural bristles
4. the pressure on the wrist was not too strong

After completing this stage, place your nails in an ultraviolet lamp for 2-2.5 minutes.

• Apply special oil to the cuticle.

What troubles might arise?

Even if the correction procedure went as it seemed to you in compliance with all the required conditions, minor troubles cannot be ruled out. Let's look at the reasons for their manifestation:

• If your nails break: They may be filed too thin or too long.
• Nail separation in the cuticle area: the shape or length of the nails is incorrectly chosen, the previous acrylic coating is poorly removed, the nail plate is not cleaned enough.
• The appearance of cracks on the free edge of the nail: the edges are poorly covered with acrylic or the acrylic is very thinly filed along the edges; the cracks were not removed during correction.

These reasons are not the only ones. Much depends not only on skill, but also on the tools and products that will be used to correct nails.

Any serious cosmetic procedure is accompanied by a number of contraindications, which either clearly state that it is prohibited, or prompt the woman to consult a specialist.

• Extensions are prohibited if nails are affected by fungal diseases.
• It is forbidden to carry out extensions if there is mechanical damage to the nail plate.
• It is not recommended to get nail extensions if you have a weakened immune system.
• You cannot extend nails while undergoing chemotherapy, taking antibiotics, or while pregnant or breastfeeding.

Is it harmful to wear acrylic nails?

Nail extension itself is not at all harmful to nails, since modern technologies and products deserve the trust of professionals. However, when purchasing material, pay attention to the price (quality cannot be cheap) and the composition of the material. Acrylic must not contain methyl methacryl (MMA). In addition to low-quality materials, harm can result from deviations from the technological process and existing requirements. For example, heavy filing of the nail plate immediately before the extension procedure is unacceptable.

There is nothing complicated in the correction procedure, just like in the nail extension procedure. The main thing is to pay attention to studying the technological process, and even better, first visit an experienced master, from whom you can learn all the nuances of this process.

If not every girl will risk getting her nails done on her own, then every second girl tries to carry out the correction procedure. It is worth noting that this process is not very easy, and sometimes even more difficult than the modeling itself. Nail correction is a procedure to restore the material in order to maintain the appearance of the manicure, as well as minimize the risk of injury, splitting and cracks on the nail plates.

Technologies

Extension is carried out using two technologies: acrylic and gel. Nail correction also varies, depending on the material used to model the nails. Each extension technology has its own pros and cons, its own characteristics that must be taken into account at all stages. And nail correction is no exception.

General information

Before you get started, you need to learn the basic general rules. Firstly, any procedure that involves the use of tools must be safe. Everything must be thoroughly treated with disinfectants. This applies to both nails and tools. Secondly, nail correction at home is faster if you use a special manicure machine. It is not necessary to purchase a professional model. A nail correction machine can be either semi-professional or even home-made (with low speed). The nozzles also need to be disinfected to avoid infection during operation.

Materials for gel correction

When processing nails extended using gel technology, the following materials are required:

• modeling gel;
• antiseptic;
• degreaser;
• acid-free primer;
• liquid for removing the sticky layer.

This is the minimum set. If the nails were extended with a single-phase gel, then it can be used for correction. If the technology was three-phase, then any system is suitable.

Tools for gel correction

The minimum set of tools that will help make the correction as quickly and easily as possible consists of:

• UV lamps;
• lint-free wipes;
• pusher or orange sticks;
• buff for polishing nails;
• gel files (100/100 grit, 150/180 grit);
• manicure apparatus (if there is one, if not - only nail files);
• brushes for modeling nails with gel;
• manicure clippers for artificial nails;
• cuticle cuticle cuticle cutter or blade.

It is noteworthy that a manicure machine can replace several tools at once, since it can carry out most of the work on sawdust.

Step by step procedure

First of all, nails and hands are treated with an antiseptic so that during work the risk of getting even the slightest infection is reduced to zero. If the manicure is done with varnish, then it must be wiped off. The cuticle is pushed back with a pusher or orange sticks. After this, it is removed with pliers as carefully as possible so as not to injure the finger. Experts recommend replacing the trimmed method with an untrimmed one in order to ensure that the procedure is carried out safely with a 100% guarantee. The next step is degreasing. A special product is dripped onto a lint-free cloth, which is used to thoroughly clean the nails. After this step, do not touch the plates with your hands so as not to spoil the adhesion of the materials. This is where the preparation ends. Correction of extended nails involves several stages.

Step #1: Thickness

If you apply an infinite number of layers of material, your nails will become thick, barrel-shaped and vulnerable to impacts. Not to mention that all the beauty of the extension will come to naught. That is why, after preparation, the first thing to do is remove the thickness of the material. This can be done either with a special attachment on a machine, or with a 100/100 grit file, since the gel is not too easy to file off manually with soft sandpaper. The thickness is removed exactly half of the existing one. The area between the cuticle and the material (there is a natural plate) is filed carefully using a soft file (150/180 grit). If the gel begins to slip strongly in this place, there are cracks and separations, then it is carefully cut down until only a strong adhesion remains.

Step #2: Length

Correction of extended nails also involves removing excess length. It appears as a result of the growth of natural plates along which the gel “creeps” upward. This increases the length. If it is unacceptable and uncomfortable to wear, then it is reduced. Too large ones are removed with nippers, medium and small ones are cut off with a machine or a nail file. Correction of the shape of the nails can be carried out at this very moment, if this is permissible. That is, a square (the standard and most common shape) can be cut into an oval, almond or circle. Usually the length is reduced by 1-2 mm. If the correction is carried out late, when the nails are very thick, then up to 5 mm.

Step #3: Processing

After all sawdust work has been successfully completed, the resulting dust is removed with a brush. Additionally, the nails are treated with a degreaser again, then with a primer. The latter is a special liquid that is designed to form a strong adhesion between the old layer of material, natural nails and the new layer of gel. The primer air dries in a few seconds. In this case, the nail plate may turn slightly white, but this is absolutely normal. Do not touch the primer with your hands; it is advisable that it does not come into contact with artificial material.

Step #4: Modeling

Nail correction involves laying out new material on the old and natural nails. Everything is done exactly the same as during extensions. That is, all the rules are followed: the gel should not get on the cuticle or side ridges, the apex remains in its place, the convex shape is preserved. Each layer is dried in the lamp exactly as long as the instructions for the material require. The ends are carefully sealed so that the gel does not slip or chip. It is necessary to dry not only from the outside, but also from the inside, otherwise sealing will not work.

Step #5: Finish

After the necessary manipulations have been carried out, proceed to the last stage. Covering the nails with a finishing gel, which can be either with a sticky layer (it is removed) or without it. When it dries under the lamp, oil is applied to the cuticle. After this, the correction procedure is considered completed.

Acrylic correction

It is not much different from gel, the material just dries differently - without a UV lamp. In addition, filing and processing are carried out with files with an abrasiveness of 150/180 grit. Using a file that is too hard can cause injury to your nails. Otherwise, the procedure is similar to the gel one. You can use nail polish remover as a degreaser, and instead of a professional antiseptic, for example, formic or boric alcohol. To make the gloss on acrylic last longer, the last layer is made using a finishing gel, which is dried in a special lamp. This combination makes the nails stronger - they become more resistant to negative factors. All brushes for materials (both gel and acrylic) must be made of natural bristles. Lint-free wipes are required so that even the slightest particle of fabric does not remain on the material.

Natural nails and their correction

Nail correction at home is carried out not only on extended nails, but also on natural ones. The procedure is called “manicure”. There are several types of it: edged, unedged, hardware. Each of them is good in its own way. For example, a hardware room does not require steaming, but a manicure machine is needed. Obreznoy copes with complex and advanced cases. And unedged manicure is considered the simplest: no special apparatus or sharp and dangerous tools are required.

Special cases

Correction of an ingrown nail with plates is performed first with a manicure machine and is considered a special case in manicure. Firstly, you first need to steam the problem finger. Secondly, you need a device with attachments. The step-by-step procedure looks like this:

1. The nail is steamed and then treated with an antiseptic.
2. The skin is pushed back with an orange stick or pusher.
3. Everything that can be processed with a cone nozzle is processed. This applies to the cuticle, side ridges, and skin on the nail.
4. Then the nail plate is degreased and sanded.
5. A special treatment plate is processed with a machine, adjusted to size and shape.
6. A special glue is applied to it, and the plate is pressed against the nail in the problem area.

A tense clamp on the nail prevents it from growing further, straightening and correcting growth. Only a master should carry out such a procedure, since at home it is impossible to assess how much tension is needed and what kind of plate is required. It is recommended to first visit a doctor so that he can determine possible ways to solve the problem of an ingrown toenail.

Price range

Nail correction, the price of which is quite high, can be carried out:

• on one's own;
• in the cabin;
• from a private master at home.

It is worth noting that in the salon the price of the procedure is usually exactly half the cost of extensions (approximately 600-1200 rubles for both hands). A private master can give a discount or even do everything for free if he is still learning. You can do the correction yourself, but only by following all the rules and procedures and extensions, otherwise there is a risk of ruining your nails to disgrace. In addition, you will have to spend money on products and tools, which turns out to be equal in cost to a procedure in a salon or from a specialist. How do professionals do nail correction? Exactly according to the instructions, in accordance with all the rules.

Conclusion

Depending on what kind of procedure is needed, it is worth considering the possibility of doing it at home. For example, it is better to entrust problematic and complex cases to a professional, and deal with easy ones on your own. Correcting nails at home is not difficult if you follow the instructions and advice of the experts. You can do any type of manicure yourself, saving money and time. Extended nails require touch-ups every two or three weeks, depending on how quickly your nails grow back. At the same time, in the absence of a special apparatus, but if it is necessary to remove the free edge from under the end, it is still worth visiting a specialist who can easily cope with this problem. Nails that have diseases (no matter whether they were present before extensions or appeared after them) must first be cured and only then beautified with varnishes or artificial materials.

About design

If during the correction of extended nails it is necessary to change the design, then it is necessary to cut off the thickness almost completely. After this, the first layer of material is modeled, on which decorative elements are laid out. It is noteworthy that such nail correction costs several times more than usual, since it combines triple work: almost complete removal, then design and modeling. Such work is rated higher and takes more time, but the result exceeds all expectations. It is recommended to think through the design in advance. For example, painting is done on already modeled nails, and internal design is done only under the base or finishing layer.

Extended nails allow many women to realize the dream of a beautiful manicure. However, no matter how well the extension is done, the nail plate grows along with the artificial nail, which means you will have to go to a specialist for correction.

Correction is also necessary in case of nail breakage or peeling.

How often do nail corrections be done??

The answer to this question will be given by the master, who will select a schedule for repeat visits based on the growth rate of the nail plate. On average, you will have to visit the salon every 3-4 weeks.

During the correction procedure, the master removes the artificial coating (acrylic is dissolved with liquid, and the gel is cut off) and reapplies it.

As a result, the manicure again takes on a neat and beautiful appearance.

Correction of artificial plates can be performed in different ways.

The following types of this procedure are distinguished:

• Minor – performed for minor damage, usually resulting from mechanical impact (scratches, chips, peeling).
• Medium – carried out monthly to update the artificial turf. The master applies the gel or acrylic again to remove the visible difference between the artificial and regrown natural nails.
• Large - involves replacing the artificial plate if it breaks, is displaced, or is detached.

Gel correction is performed as follows:

1.Before starting the procedure, hands are disinfected with a special means.

2.Get a manicure with cuticle removal.

3. We use a 220-grid file along the regrown part of the nail, smooth out the transition zone of our own and the extended nail, sand the entire surface and remove the coating (shellac or varnish), the file is carried out as when preparing the nail for extensions.

Remove excess length and give shape. This must be done carefully so as not to injure the skin around the nail plate. At the end of the procedure, the dust is brushed off with a brush.

4.For correction while leaving the previous extension material, a couple of new layers of gel will be required. Apply a thin layer of gel with a brush to the cleaned, regrown surface and the rest of the nail, filling the niches after sanding. We dry the nails in the lamp, apply another layer of gel and send the nails to dry again.

You also cannot do without polishers or buffs. They help give your nails shine and smoothness. Buffs have 4 sides, each with its own grain size. The sides are labeled with numbers so you can easily figure out which order to use them in.

4. Degreasing - this will require a special liquid, for example, inexpensive from “Severina” or “Domix” or better known from the manufacturers “CND” or “Jessica”.

5. Application of primer - they are also presented as affordable and suitable for home use (“Irisk”, “Tango”), as well as expensive and used in salons (“CND”, “OPI”).

6. Applying a base coat - for home use, you can purchase an inexpensive base coat from SuperNail or UV Bonder.

7.Applying gel - the most popular manufacturers are “Irisk”, “Planet Nails”, “EzFlow”, “IBD”, “Masura”. Also purchase a brush from a specialty store.

8.Polymerization under a lamp - this requires a special UV lamp. They have different powers - from 9 to 36 Watts and a timer for 10, 30, 60 seconds.

9.Applying the finishing coat – for gel correction, products from Severina, Top Gloss-gel, and TNL are recommended.

How to correct acrylic nails

In addition to gel extensions, acrylic extensions are also popular. To carry out the correction, you must first remove the old coating.

It is performed as follows:

1. The master disinfects his hands with soap or a special solution.
2. The varnish coating is removed with ordinary nail polish remover, but always without acetone.
3. Then the master does a manicure, removing hangnails and cuticles. For heavily overgrown nails, it is necessary to remove the shine with a fine-grain nail file.
4. The periungual bed must be covered with adhesive tape to prevent acrylic from getting on the skin and cuticle. Then an acid primer is applied.
5. A brush with bristles is moistened in monomer and dipped in acrylic powder. An acrylic ball is obtained; it is carefully stretched over the surface. The acrylic layer is polymerized under a UV lamp.
6. After correction, the nail is given the desired shape, first with a file with a large grain, and then with a fine one. The procedure is completed by polishing with a buff.

If you're tired of getting your nails done

With the advent of permanent shellac and gel polishes on the nail industry market, the popularity of extensions has decreased somewhat. This is due to the fact that gel polishes also stay on the plate for at least 3 weeks and do not require filing.

As a result, you can quickly grow natural nails.

Gel polishes have the following advantages:

• lasts a long time, does not chip, does not lose color intensity,
• easy to apply and remove, so they are often used at home,
• do not have an unpleasant odor, rarely cause allergies,
• When removed, the plate is not injured.
• help in strengthening and restoring nails.

Manicures with shellac and gel polishes are offered by almost all beauty salons, and the procedure for both application and correction takes less time than with extensions.

The choice of colors is incredibly large, and experienced craftsmen create various designs and complement them with decorative elements.

But no matter what coating you choose - gel, acrylic or shellac, do not forget about timely correction, and then your nails will remain beautiful and healthy.

Short nails are not for you? Do you have an important event coming up where you need to shine, but your manicure leaves much to be desired? Let's talk about how to give your nails the shape you want and draw attention to your beautiful nails for as long as you want.

Nail correction with gel is a second life for artificial nails that you have already become attached to. In order to preserve their beauty, this procedure should be carried out systematically.

This is especially true for those ladies who cannot imagine themselves without such a hot trend as flawless nails, and strive to always be on top.

If you want to learn this skill yourself in the shortest possible time or simply understand how well a particular master can carry out this operation, step-by-step instructions will help you with this. You will also learn how to properly renew the coating and restore its appearance.

Videos presented on the Internet will help you understand what is included in a quality correction procedure.

Does your master perform the correction correctly?

Correction of gel nails is necessary in order to strengthen and also provide full protection of your own nail plates, while unnatural nails should acquire a luxurious and captivating appearance for a long time.

This procedure is now included in the basic package of services in many salons, and you can often take lessons here to learn this skill yourself.

The main secret of the skill of gel correction specialists is that the adjustment should not affect the quality of the original nail modeling.

There are several correction methods:

• complex and simple correction using gel;
• mini-correction;
• correction of gel nails using French gel;
• correction, which involves reconstruction of the nail design;
• Correction with gel polish.

This procedure is incredibly labor-intensive, so craftsmen should be careful during it. Any mistake can affect not only the appearance, but also the “use” time of your nails. How to carry out the procedure correctly will be shown in the video lessons that you will find below in our article.

After about 2-3 weeks, the manicure begins to move towards the tip of the nail. If something distracts you and you decide to carry out a procedure such as correction of extended nails, then over time the errors that the master made during the initial modeling will become more and more noticeable.

Overgrowth of nails can lead to breakage and cracks.. The aesthetic appearance also plays an important role, which, of course, we would all like to preserve longer.

That is why correction of extended nails should be done as often as your nail technician recommends.

As the video shows, Usually the optimal frequency is considered to be once every 3 weeks.

Perhaps video lessons, abundantly presented on the Internet, will help you not only learn the basics of performing this procedure to choose a good master, but will also give you an incentive to learn this skill and make the correction yourself?

Basics of gel correction

As you can see after viewing the photos and videos, the process itself is carried out in several stages. The instructions instruct you to do them in the following sequence:

1. At the first stage, as the instructions and lessons on manicure tell us, it is necessary to carry out special treatment of the skin.
2. Now you need to shorten the nails a little and then shape them (trimming).
3. The thickness of the natural nail should be slightly reduced using a manicure stick, and only then the cuticle should be removed.
4. The next thing you need to do is to form a stress area that forms in the middle of the nail. To do this, the material should be distributed over the surface as evenly as possible, and then dried and sanded.
5. At the final stage, varnish should be applied. (This is the case if no other nail art was initially performed.)

Now the result will last for a long time, but after a month it will be necessary to carry out correction again to “refresh” the manicure.

Preparing for the procedure - what will be required of you?

1. When carrying out gel nail correction, there are a number of rules that you must follow before going to the salon.
2. About a couple of hours before visiting a specialist, it is not recommended to apply cream to your hands or wash them.
3. 3-4 days before this event, you should perform a regular hygienic manicure, but without using varnish. It would be useful to find out from a specialist the duration of the session. This parameter depends on the condition of the hands.
4. You can also perform baths with medicinal herbs to avoid the aggressive effects of chemicals.

Special preparation will make it possible to carry out the procedure with the highest quality, and the results will last for a long time.

How to help your nails survive the blows of fate

• Extended nails require increased attention and accuracy. But it is not always possible to handle them carefully. A strong, rhythmic blow, pressure - all these are reasons for correction.
• An artificial masterpiece can delaminate, crack and break off. The photos and videos show that the aesthetic appearance quickly deteriorates and the former charm is lost.
• In the event that the gel coating has been damaged, making adjustments will not be difficult. But it also happens that the nail cracks along with the natural one, and then the session may take longer. In such difficult cases, lessons on gel correction will also help you.
• Detachment may appear at the site of the lateral sinuses of the nail. This can be affected by homework, allergies to the ingredients of the gel, as well as frequent use of antibiotics.
• If you have revived your nails with correction, now they should be protected as much as possible. You should not knock them, or scratch the surface, or open hard-to-open lids, boxes, etc.
• If you are faced with the task of cleaning up your apartment, then you should carry out household work only with gloves, and afterward, make it a rule to lubricate your hands with cream.
• Don't be afraid to use moisturizers because the gel allows you to use them in any quantity.