How to embroider roses with ribbons for beginners. Embroidery with satin ribbons: roses

08.11.2019

Over the years, the popularity of rose ribbon embroidery is only growing, because making a composition using ribbons is not difficult. Even a child can handle this kind of work, but the end result looks amazing.

The most common pattern for ribbon embroidery is flowers, especially roses. If you have long wanted to learn embroidery, then you should watch several master classes or use the instructions, after which you will definitely be able to create your own unique pattern.

Ribbon embroidery as a hobby is not in vain loved by embroiderers - gorgeous scarlet roses embroidered on black fabric look simply mesmerizing! To understand step by step how tape masterpieces are created, read MK and watch the video tutorials at the end of the article.

Thanks to such a composition, you can improve not only your home interior - pillows, napkins, bedspreads - but also give a new look to your wardrobe items.

To embroider a rose ribbons, you will need to prepare all the necessary materials in advance.

Embroidery with roses ribbons: master class

If you don't want to bother and take on complex embroidery whole flowers, then use a simpler option, which is intended for beginners in this matter. To do this, you just need to twist a certain number of roses and buds from ribbons of different colors, stitch them and lightly burn them with fire on the underside.

If you are unable to create Beautiful flower, then look at the photos or sequential instructions and repeat in order. Next, from a wide ribbon, using sharp scissors, make a couple of leaves and trim their edges with a lighter.

Having presented the finished picture, arrange all the parts of the bouquet in the desired sequence and sew them to the fabric. To make the picture even more beautiful, you can decorate it light loops or knots.

Gallery: rose embroidery with ribbons (25 photos)

How to embroider roses with ribbons

Before starting work, you need to create a knot on the tape that will secure it tightly to the fabric and prevent it from coming undone during work.

How embroider rose? First, thread the end of the thread into the needle, and on the opposite side, bend the end and thread the needle through this area. Be careful, if the needle has a thick end, it can ruin the thin satin fabric.

Next, let’s look at ribbon embroidery roses and bud. You can create a simple rose using satin ribbons, even if you have never tried yourself in this activity. Take the ribbon and twist a rose bud at the end, which will be the middle of the flower. To prevent the ribbon from unraveling, sew the flower from the bottom and sew it to the fabric itself. After the bud is fixed, the main part of the work and the creation of the real flower will begin.

To create a large and lush rose, choose a ribbon two meters long, and for a small flower, a small piece of fabric will be enough. Thread the ribbon through the eye of the needle and begin to make turns around the resulting bud, while creating small stitches.

Make sure that the outer side of the tape is always on top, otherwise the resulting composition will not be so attractive in appearance.

After practice, try making a rose from wide ribbons - it will make the flower more voluminous and improve the picture. Perhaps the perfect rose will not turn out soon - the ribbon will twist, lie unattractively, or the flower will turn out to be of the wrong shape the first time.

There is no need to be upset - a little practice and everything will go as usual. To help flower sit nicely on the fabric, try to stitch it again with thread; or watch some tutorials to understand how to work with unruly fabric.

Your flower will also need stem And leaves. Leaves are made using two stitches of satin ribbons or one stitch if the ribbon is wide; Sepals are created in the same way.

To embroider a flower stem, you need twist a narrow ribbon and sew it in the form of a thin sausage. To create a complete composition and additional decoration, you can sew several buds on the sides, make grass using green threads, or decorate the flowers with beads.

From the first time you may not understand what your painting will look like, and viewing photographs or master classes will help you figure it out.

So, the more loops you have, the more magnificent the rose itself will be. The petals should be sewn as tightly as possible. Next, the remaining parts of the flower are embroidered, which need to be placed on the surface of the fabric.

When working, some rose flowers should be kept small and not supplemented with large, lush petals. This will give the work a special flavor; You can also sew translucent beads to the picture.

Embroidery with threads

This method can be safely used by beginners. The flowers are fully embroidered onto the fabric, which means there is no need to twist the ribbons into the middle. First you need to secure the thread to the material and from this place create five stitches that are similar to each other.

The shape and volume of your flower will depend on the length of the stitches. Then pull the ribbon to the main side towards the rose and begin to move it in a circle, alternating circles under and above the stitches.

Remember not to tighten the stitches, otherwise the flower will look too compressed. When working, you can immediately take the ribbon, but, most importantly, work carefully so that your embroidery does not simply damage the material. The rose obtained in this way will look more beautiful and more voluminous than the flower created using the previous option.

Embroidery using patterns

Seamstresses who have significant experience in embroidery, when creating their works from satin ribbons, use a large number of patterns and blanks, which, like stencil, are transferred from paper to fabric, and then used as an embroidery outline.

Embroidery with roses for inspiration

ROSE EMBROIDERY MASTER CLASS

Roses are embroidered using satin stitch, cross stitch, woven from beads and, of course, made from ribbons that look so much like delicate petals. This is what we will do now.

PICKED ROSETS

A fairly simple craft that is made using the technique of gathering with thread or wire tape. For such a rose, ribbons of any length and width are suitable. To begin with, you can take a four-centimeter wide ribbon and practice so that you are fully equipped to make a flower. By combining several beautiful multi-colored roses, adding leaves and other decorations, you can quickly make a brooch or hair clip.

You can start with a wire tape four centimeters wide, and from 46 to 60 in length. You can make a rose by gathering on a wire or using a U-shaped stitch. To make a smaller rose, for example, on a brooch, you need to take a smaller wire ribbon (the width remains the same - four centimeters, and the length should be 20-25 centimeters).

ROSES FROM WIRE TAPE WITH YOUR HANDS

It is necessary to expose one and a half centimeters of wire at one end of the tape and connect them together. From the opposite end of the tape, make a gather on the wire, moving the fabric towards the fixed edge.
After you have a lush assembly, the remaining ends need to be fastened together. Bend one end of the wire tape (long enough to hold the flower) and sew it in place.
Now we twist the entire length we have.
Don't forget to make stitches, this will secure the rows. Once twisting is complete, the raw edge of the ribbon must be folded under the base of the flower and sewn securely.
All excess tape and wire are removed, and the resulting rose is sewn into the desired place or placed on the stem.

U-shaped gathering

Before stitching, you need to remove one wire.
Then, on the remaining one, assembly is done. One end of the tape is bent and twisted in exactly the same way as in the previous version. As you twist it, you need to secure the assembly with stitches.
The rest of the tape is folded under the base of the rose and stitched through all the layers for a stronger fixation. The rose is ready for sewing or planting on the stem.

If you want the rose to look different, when twisting the ribbon, its top edge must be folded downwards.

BUDS FROM Ribbons

Small pink and flat buds are made from ribbons 1.5-2 cm wide and 5 cm long. Well suited for a flat composition. For the cup, you need to take a green ribbon 2.5-6 cm. For such small buds, leftover ribbons are good.

The tape from which the bud will be made is folded, gathered tightly and secured with thread.
The gathered bud is wrapped with calyx tape and stitched.
The ends of the bud are cut off, and the bud itself is sewn to the border or used at your discretion.

FOLDED ROSES FROM SATIN Ribbons

This technique is used to quickly make roses. Folding is a rather difficult technique to master, but it is the fastest. Once you've learned how to fold your ribbon the way you want, you'll want to fold any ribbon you see.

You can practice on a tape four centimeters wide and from 30 to 50 centimeters long. Sometimes, you can simply fold the ribbon and cut it to the desired size of the rose.

It must be remembered that the edges of the rose should be at the same level so that the center does not protrude forward.

Bend the ribbon on the right side.
We bend it across the previous fold again, and then wrap it around several times so that we get a twisted center of the flower. Such a beautiful curl will be the secret of the future flower. For greater reliability, you can flash it. There is no need to cut the thread.
We bend the tape on the left side. To increase the space between the folds of the rose, the center of the bud needs to be slightly tilted. We twist it along the diagonal of the bent tape. To better secure the layers of the flower, they need to be stitched.
We bend the ribbon again on the left side and twist it with a fold around the flower. There should be enough space between the layers to allow the petals to breathe. Secure with stitches. This sequence of actions is repeated several times, depending on the size of the future rose. Don't be afraid to experiment. The worst option would be to unravel the tape and repeat all the steps again.
At the final stage of work, we bend the ribbon down and sew the raw edge to the base of the flower.
The excess ribbon is cut off, and the newly made rose is attached to the right place.
If you want to attach a stem to the rose, you need to insert a wire into the base of the finished flower and secure it with glue.

You need to pay attention to the shape of the petals. As a rule, the edges of roses are not processed according to the folds, so they look unnatural and uninteresting. To make the rose more natural, you can process the edges accordingly: pinch here and there or turn the ribbon in the desired direction, the rose will become like a living one.

Master class from Nataliya k
For work you will need: Satin ribbon of pink and green colors, 1.5 cm wide (about 2 meters each), canvas (burlap or other fabric - I don’t recommend starting with thick fabrics, because it’s more difficult to pull a needle and ribbon through thick fabric) ,

threads to match the ribbons (floss), a special needle for embroidery with chenille ribbons - a thick needle with a large eye and a sharp tip.

This needle is good for embroidering on fabrics with fine weaving: silk, organza), or a “tapestry” (“knitted”) needle - with a large eye and a blunt tip - it is more convenient to embroider on canvas, burlap, knitwear.

For the rose, lay 5 frame threads radiating from the center, taking into account the diameter of the rose (in this case, the beam is 2 cm).

Bring the tape to the front side and begin to twist the carcass threads, passing the tape above and then under the carcass thread. Make sure that the tape lies with the front side up.

Lay the tape loosely without tightening it.

Our rose is ready

Now let's make several rosebuds with loops attached

Embroider the leaves around the buds with long stitches with curls (holding the ribbon with the front side up, bending the ribbon to the wrong side, in the opposite direction, make a puncture with a needle from above vertically in the middle of the ribbon according to a certain stitch length. You get an acute angle with symmetrical curls of the edges in the middle of the ribbon

Embroider the rose leaves with loops with attachments (like buds). Sew on twisted ribbons for the stems using hand stitches. Our roses are ready. All that remains is to design the composition. Good luck!

Regarding securing the “tails” from the wrong side, as a rule, I simply hem them discreetly with a regular needle and thread.

Roses. A master class for beginners concerning this particular flower will be discussed in this article. Using flowers embroidered with ribbons, you can easily give new life to an old bag or blouse that was accidentally stained.

Roses are loved by many, which means they are versatile and perfect not only for decorating clothes or interior items, but they can also be used when creating cards or in gift wrapping. Learning to create such beauty is not at all difficult. All that is required from you is a lot of desire and a little patience. And, of course, several tapes.

Preparing materials for work

So that embroidery with rose ribbons can be easily learned step by step, you should select the necessary materials and tools. In general, you can use absolutely any fabric for embroidery, but for training, choose canvas or burlap.

A needle for ribbon embroidery should have a large eye and a sharp tip. Of course, if you embroider on canvas, you can use a tool with a blunt tip. But this option is only suitable for canvas. The ribbon you choose can be of any width. But still, a width of one and a half or two centimeters is considered the most suitable. In this case, embroidering roses with satin ribbons is considered the most correct. Also in some cases you will need embroidery thread. To make your work look neat, select a thread that matches the color characteristics of the ribbon as closely as possible. And don’t forget about a hoop for stretching the fabric and scissors.

Embroidery ribbons. in a simplified version

If you still think that embroidering with ribbons is difficult, but you really want to make such a product, there is another option for you. It is simpler compared to embroidery. It's like false embroidery with rose ribbons. A master class for beginners in this version will explain how to fold roses from satin ribbons.

You need to take the ribbon, determine its center and bend it at this place at an angle of ninety degrees. Then alternately turn the edges towards each other, and at the end pull one of them and secure the flower with threads. To do this, simply stitch it right through. Once you have collected the required number of specimens, these flowers can simply be placed on the product and sewn on. Then you can complement the overall picture with simple ribbon knots and embroidered stems.

Where to start

Before embroidering roses with ribbons, the master class for beginners suggests learning some important points. First of all, you should create a neat knot on the ribbon. It should be large enough to securely fasten the tape. It should not jump out at the most inopportune moment, so that the entire embroidery with rose ribbons is not spoiled. Schemes are rarely used in this work, but it is still worth making some markings. Marking will allow you not to disturb the correct proportions in your composition. You will see where a flower or other element is needed, and also imagine its size.

So, to make a fastening knot, you just need to fold the edge of the tape twice and stitch it. Now your tape will definitely not slip out of your work. The main thing is to try to make it look neat from the wrong side of the product.

Rose ribbon embroidery. Scheme

Even the most experienced craftswomen use diagrams when creating large works. This allows you to better navigate the picture and not miss the size of the flower. If you have a ready-made pattern, embroidering will be much easier.

You can prepare templates of the plot you like for repeated use. In this type of needlework, one and the same option can be modified in such a way that no one will guess. You just need to change the color or size of the ribbon or add beads to the work. To create a pattern like this, sketch it out on thick cardboard and then use a thick needle to create holes where you want the stitches to be. Using a pencil, transfer the dots onto the fabric and begin embroidering.

Progress

In this section we will look at embroidering roses with ribbons step by step. To begin, take a ribbon and twist it into a small bud. This will be the center of your future flower. So that there is no chance of it falling apart, sew it and attach it to the canvas.

After the bud is secured, take a piece of tape about two meters long and begin to form the flower. This length is enough for a fairly lush rose, and if you want a smaller flower, then you need less ribbon. When creating small stitches, place them around the bud so that the shiny side of the ribbon always remains on top. This will add brightness to your painting. Try also experimenting with ribbons of greater width, then you will get larger and more expressive roses.

Naughty tapes

You are deeply mistaken if you expect the tape to immediately lie the way you want it. Not at all. At first, it may twist in the wrong direction or bulge in the most unpredictable places. And in this case, only patience and training can be your helpers. Examine the critical points of your flower and, armed with thread to match the ribbon, simply boldly hem the petals where you consider it necessary. With this action you will certainly be able to “arrange” your rose as required by the plot.

Shutdown

You need to use your imagination a little more and work a little to get the finished ribbon embroidery. A bouquet of roses should be supplemented with small buds. And also don’t forget about the leaves and stems.

To make the stems, you need to either sew them with a thin green ribbon using thread or twist the ribbon and sew it to the surface of the fabric using thread. The leaves are made with a wide ribbon in one stitch or a narrow ribbon in two stitches. To make the plot complete, sew on beads to imitate dew on the petals, or add some other sewing elements. A basket or vase in which you can place your bouquet will add originality and complexity to the composition.

First, using a lighter shade of ribbon, sew the basket with horizontal stitches. Then twist the second (darker) tape into a rope and sew in a vertical direction so that the new stitches form a checkerboard pattern with the previous ones.

Now we need to create a handle. First, sew small stitches of the same color along the contour, and then take a longer piece of another ribbon and go through each stitch, performing twisting movements. You can make a basket from ribbons of different colors. The main thing is not to tighten the tapes under any circumstances, so that the basket does not turn out flat.

Rose embroidery on threads

Another interesting and simple method can be done by embroidering roses with ribbons. A master class for beginners using threads is ideal for those who are experiencing embroidery for the first time. In this option, you do not need to twist the inner bud separately. You should secure the thread on the fabric in a certain place and from this point make five stitches in different directions.

In general, the picture should resemble a star, and all stitches should be the same in length. The degree of splendor of the rose will depend on the length of the thread stitch. Bring the ribbon out at the point where the stitches came out and begin laying it in a circle. At the same time, in order of rotation, pass the tape over or under the thread. The flower should not be tightened. Instead of thread, you can use a thin ribbon. The flower should be quite lush and voluminous.

Decoration and care

In order to get a finally completed ribbon embroidery of roses, paintings or other products with it, you need to finalize them. If this is a painting, then it should be taken to the workshop and a frame selected for it.

And if this is a piece of clothing or an interior item, then this product needs to be finished. If you are going to place a picture under glass, then you should use special frames that will allow you to preserve the volume of the picture.

Items with embroidery can quickly become dirty; they should be washed or even dry cleaned. But such products should be washed by hand and under no circumstances should they be wrung out or rubbed. Otherwise, the drawing may be significantly deformed.

Items on which the tapes have been tinted cannot be washed.

This rose will be flatter than traditionally embroidered roses.

Step 1

Bring the needle and ribbon at the center point of the flower from the wrong side of the embroidery to the front side. Do it. This knot stitch will become the center of your rose.

Tip: Don't pull the knot too tight. If the fabric is loose, then he can “drown” in it.

Step 2

At the same point in the center where the Chinese knot was made, or at a distance of about 1-2 mm from it, bring the needle and ribbon from the wrong side to the right side of the embroidery. Place the ribbon as if you want to surround the knot with it, then move the ribbon away from the knot a little to the side (a few millimeters) and, wrapping the ribbon up and over the ribbon, insert the needle in the middle of the width of the ribbon from the front side of the embroidery to the back, as shown in the photo.

Step 3

Pull the ribbon to the wrong side, but do not pull it too tight. You have a straight, slightly curved stitch that goes around the knot. Carefully straighten the edges of the ribbon and fold the ends.

Step 4

Continue making straight stitches around the Chinese knot in a spiral, but do not tighten the tape on the right side too much.

You have embroidered the base of your rose, however, for now the stitches are spaced far apart.
Tip: you can make stitches of different lengths: shorter ones are those located close to the center of the flower, and embroider the longest ones around the circumference of the rose.

Step 5

Now fill the rose with similar stitches in the second circle. Let's start from the center: bring the needle and ribbon from the wrong side to the front side close to the base of the Chinese knot, then at some distance insert the needle and ribbon into the ribbon and into the fabric - as described above. This stitch should cover the unembroidered area of the fabric between the petals.

Step 6

Embroider the petals in the same pattern (in a spiral) so that the fabric between the petals is barely visible.

Step 7

Embroider a couple of leaves in addition - and your rose is ready.