How to knit a sweater for a large dog. Master class on knitting a sweater for a small dog

You will need

• - 50 g of yarn (75% wool, 25% nylon, 205 m);
• - 50 g of yarn (100% alpaca, 166 m);
• - 50 g of yarn (94% mohair, 6% nylon, 49 m) for binding;
• - four knitting needles (4 mm);
• - four knitting needles (3 mm);
• - hook (6 mm).

Instructions

Take measurements: chest girth, back length (approximate measurements for toy are 28-30 cm and 24 cm). The sweater is made with an elastic band, so the product will stretch well. Knit for density: cast on 19 loops on the knitting needles, knit 25 rows of thread in two layers (from two skeins, wool and alpaca), fabric - 10 by 10 cm.

Knit a sweater from the neck down, cast on 48 stitches on four knitting needles (4 mm), knit with an elastic band 2x2 (knit two, purl two) 4.5 cm. Then start adding loops: add (yarn over) 1 loop in every second pair purl to make 54 loops. Continue knitting until the height is 6 cm, then add 1 stitch in the remaining purl pairs (60 stitches).

Continue until the height is 8cm using a 2x3 rib (knit two, purl three), then bind off the armhole stitches. There are 60 stitches on the needles at this stage, 15 on each needle. Cast off the first two stitches on one needle, slip the remaining 13 stitches onto a stitch holder (pin), then cast off the first two stitches on the next needle and work the remaining 43 stitches with a 2x3 ribbing (knit two, purl three).

Knit the back (43 stitches) with an elastic band for another 5 cm, then transfer them to the stitch holder. Transfer the 13 front stitches to a working needle and knit 5cm across the front, then join the front and back stitches, adding two stitches where they were cast off.

Continue knitting until the product is 19 cm high, then begin decreasing: in every second row: twice (at the beginning of the first and third knitting needles) two loops each; twice one loop each, another row - two loops each and the last row - three loops each. Finish the product at a height of 24 cm.

Make the sleeves by using knitting needles (3 mm) to cast on 36 stitches along the edge of the armhole, knit 3 cm with a 2x2 elastic band, close the knit stitches with knit stitches, purl stitches with purl stitches (so as not to tighten the edge), knit the second sleeve.

Crochet the bottom of the sleeves and the edge of the sweater (6 mm): 1 single crochet, one chain stitch, skip 1 cm, then 1 single crochet, etc.

Sources:

• DIY clothes for a toy terrier
• how to crochet a sweater for a dog

Many people believe that clothing for dogs is unnecessary, believing that a dog is an animal whose body is adapted to any weather conditions. However, this is not always the case. Clothes for smooth-haired dogs, especially small breeds such as the toy terrier, have become not just a whim of the owner, but an urgent necessity, especially on cold days.

You will need

• - 80-100 g of yarn;
• - knitting needles No. 2.5-3;
• - two large knitting pins;
• - hook No. 2.5;
• - tape measure;
• - scissors;
• - large needle with a wide eye;
• - small lace stops;
• - lace to match the threads;
• - detachable zipper or buttons for fastening.

Instructions

Start by knitting a 10x10 cm sample and calculate how many stitches you get in 1 cm. Then count how many for the cast-on row. For example, in a 10cm sample there are 30 loops, therefore there are 3 loops in one centimeter. If the neck volume is 22 cm, then you need to cast on 66 loops.

Knit starting. Cast on 66 stitches and knit the desired neckline length using a 1x1 or 2x2 rib. Next, add loops so that you get a row of holes for the lace. Yarn over the thread and repeat after 5-6 loops. Knit the odd row using an elastic band according to the pattern.

Calculate the number of loops for the increase as follows: calculate the difference between the girths of the chest and neck. Multiply this difference by the number of loops of the sample in one centimeter.

Next, knit according to the pattern to the paws. Now you need to make holes for the sleeves. Divide the canvas into three parts. The middle part will be 12 loops (with two loops becoming edge loops), and divide the outer parts in half. Throw the loops of the two parts onto pins and knit separately. The length of the slits is equal to the length of the back divided by three. If this measurement is 24 cm, then the size of the slots will be 8 cm.

Now combine all three fabrics into one and knit another 8 centimeters. Next, knit the holes for the hind legs, only in this case you should divide the entire fabric into three equal parts. Close the loops of the middle part. Knit the outer parts separately 8 centimeters (these parts will cover the dog’s croup).

Using a crochet hook, tie the cut on the back with single crochets.

Knit the sleeves, gradually reducing the number of loops. Don't make the sleeves too long, otherwise it will be difficult for you to put on. A sleeve 5 centimeters long is what you need. Tie the trouser legs a little longer than 7-8 centimeters. Sew the sleeves into the slits. Sew on the pant legs. Please note that the inside of the trouser leg must be left free.

Cut the lace 4-5 centimeters larger than the neckline. Place a stopper on one edge. Thread the string through the holes on the neck and secure the second stopper.

Helpful advice

It is best to knit clothes for a toy terrier with an elastic band, then they will always fit, as they will turn out to be almost dimensionless.

During the cold season, many pets do not like to go for walks. This is especially true for small and medium-sized smooth-haired and hairless breeds. Such dogs get very cold, which can lead to serious illnesses as a result. A knitted sweater will be your salvation in this situation. And to make your dog stand out, take a little extra time and knit a dog product with a pattern.

You will need

• - knitting threads of different colors;
• - knitting needles;
• - centimeter;
• - scissors;
• - checkered paper or printer;
• - pencil.

Instructions

For the first time, choose a simple pattern. For example, diamonds, hearts, sun. At first, it is better not to use those images where very precise and many shades are required: you will get sweaters with a pattern of this kind when you “fill” your hand enough.

Take measurements from the animal. Basic: coverage of the neck, chest, distance between the paws, length of the future product. As a rule, knitted sweaters are created in length along the back exactly to the tail. On the tummy it can be varied: for better it’s shorter, for girls it’s longer.

To knit a sweater with a pattern for a dog, it is important to correctly calculate rapport - the number of loops in one element of the pattern that is repeated. The total number of loops in the fabric should be evenly divided by the number of loops in the repeat. If one or two are missing, add them one row before the beginning of the pattern.

Print out the prepared pattern. Knit up to it according to the usual pattern: collar, expansion to the chest, armholes or raglan sleeves. The classic placement of the pattern is the back. It is better to start knitting the prepared pattern from the middle of the armholes. Please note: a simple pattern can be knitted either on a monolithic product or on one that requires a fastener.

Pay close attention to the direction of the pattern on your dog sweater. When knitting from top to bottom (from neck to tail), you also need to “read” the pattern from top to bottom. When performing the front row from left to right, when doing the back row - from right to left. Please note: you need to knit a sweater with a pattern using stockinette stitch.

Watch the thread tension. It is possible to correct a mistake with weak tension and sagging, but redoing a tightly drawn pattern without unraveling is problematic. Especially if there is a very small gap between two colored elements. At the end of each row, knit two threads: from the main fabric and a patterned one. This will make the edge smoother.

Video on the topic

note

You can knit a sweater with a clasp anywhere or without one at all. Take this moment into account when distributing the pattern.

Helpful advice

Try to avoid a design where the pattern is located almost at the tail. There he looks least impressive.

Practical and fashionable clothing for dogs not only helps owners decorate their beloved pets - it is often an urgent need. Many decorative pets of short-haired breeds cannot do without protection from the slush and wind of the mid-season, and winter frosts. Hats are especially relevant for dogs suffering from ear diseases. Try knitting a beret for a dog for spring or cold summer evenings, and your four-legged pet will look stylish and well-groomed.

To knit a beret for a small dog, you will need no more than a skein of thread, about 50-60 g. For the future headdress, choose soft and pleasant to wear acrylic yarn in the same style as the main outfit. Today on the Internet you can find a large number of recommendations on how to dress a dog in spring and other seasons, so think in advance about the optimal clothing for your pet.

Be sure to work a swatch of garter stitch (knit stitches only) on size 3 circular needles - this will give you an accurate idea of ​​the gauge of your knitting.

Start knitting a beret for a dog from the bottom edge - the headband, the length of which is determined according to the finished knitted pattern and the coverage of the dog’s head.

Make a piece 2 cm high and switch to stocking stitch (from the “face” of the fabric - front loops, from the back side - purl stitches). To form the main part of the headdress, double the number of thread arches on the working needle, making a yarn over through each loop (in the next round they are knitted with crossed purls). Then, from the “face” of the canvas, make one increase after every fourth arch.

Knit a piece of the required height, periodically trying the workpiece on the dog, and then start knitting the bottom of the beret for the dog. In knitting circles, cut the fabric in the following sequence: knit every fifth and sixth stitch once; fourth and fifth; third and fourth. After this, knit together a pair of thread arches, and pass the working yarn through the rest, cut off a small “tail” and tightly pull the top of the headdress.

The product can be equipped with a mischievous visor if desired. For this, crochet 18 chain links and perform straight and reverse single crochet stitches, making decreases at the end and beginning of every second row. To give the fabric a rounded shape at the edges, knit a pair of stitches together symmetrically. When the visor is formed, finish the work. You have managed to knit a beret for a dog, all that remains is to decorate it to your taste with embroidery, appliqué or a pom-pom.

Video on the topic

Today in pet supply stores you can see a wide selection of clothes: sweaters, overalls, blankets for any season and in different colors, but it is not always possible to choose a pet from what is offered. Then the only way out is to sew or knit according to individual sizes. This is where, perhaps, you can give free rein to your creativity - play with color, pattern, decorate the product with decorative braids, ruffles, bows. The knitted sweater for a dog, which we will tell you about, can be done even by beginners. No matter how complex the decor, there is only one pattern for knitting the warp. Let's take a closer look at it.

Basic animal measurements

We need three measurements– neck circumference, chest circumference, back length. how to knit a sweater for a dog

How to knit a sweater for a dog

As an example, let's take a knitted sweater for a French bulldog.

Neck girth 45 cm, chest girth 64 cm, back length (distance from collar to base of tail) 34 cm. Giara yarn (100% wool) ecru 150 g, light denim for pattern approximately 70 - 100 g, knitting needles 2.5 - 3 ,5.

We cast on the loops on circular knitting needles; it is more convenient to make a knitted sweater for a dog using ADDI 60 cm knitting needles.

For the neck - 60 loops, knit with an elastic band 1 x 1 centimeters 7 - 8, in the middle of the elastic for elegance you can knit several rows of blue yarn.

To make the sweater more voluminous on the chest, you need to knit part of the yoke in incomplete rows, including raglan loops.

Approximate pattern of a sweater for a dog

• 1st full row,
• 2nd row - do not include back loops,
• 3rd row - knit only the front loops (and the loops of the raglan lines adjacent to the front),
• 4th row is complete,
• from the 5th row, repeat this pattern 3-4 times.

Thus, the back will be approximately 2 - 2.5 times shorter than the front.

We remove the loops of the sleeves onto separate knitting needles and continue the sweater with a satin stitch of 12 - 15 centimeters, try it on. When the knitting needles are level with the front surface of the thigh, we begin knitting again in incomplete rows:

The 1st row is not knitted in the center of the front 5 - 7 loops, then we leave 2 or 3 loops unknitted on each side, now the front remains at hip level, and the back “grows”.

When 4-5 cm remains to the base of the tail, we knit in the circle again, but with a 1 x 1 elastic band, and close the elastic.

We knit the sleeves to the required length, ending with an elastic band of 4-5 cm.

Knitted dog sweater is ready! Congratulations on your new look!

By the way, it will, of course, not be difficult for more experienced needlewomen to create even.

This page is found by queries:

• dog sweater knitting patterns with step-by-step photos
• knitted dog sweater for beginners
• knit a sweater for a French bulldog
• dog sweater knitting patterns with step-by-step photos for beginners

A sweater for a small dog is a necessary thing for the off-season and cool weather. We will knit a sweater with fish. Your dog will love the warm new clothes, and most importantly, it will warm the baby.

And more knitting for our lovely pets:

Photo and knitting pattern

To knit a sweater you will need: yarn “Natasha” (95% wool, 5% acrylic, 250 m/100 g) -50 g gray, leftover blue and yellow flowers, a set of knitting needles No. 2.5.

Knitting density: 26 sts x 34 rows = 10 x 10 cm.

Description of work:

Knit in the round on 5 needles.

Cast on 60 sts with gray yarn and knit 5 cm with a 2 x 2 rib.

Next, highlight the central loops of the raglan with a contrasting thread and knit as follows: k9. p., add 1 p., 1 knit. p., add 1 p., k22. p., add 1 p., k1. p., add 1 p., k9, add 1 p., k1. p., add 1 p., k16, add 1 p., k1. p., add 1 p.

Knit 7 cm, adding one loop in each 2nd row along the raglan lines, make 11 increases (=148 stitches), then remove the sleeve loops onto additional knitting needles (31 stitches each).

2 cm continue to knit in the round together 86 stitches (back and front), then according to the pattern, change the color of the thread to blue and knit another 5 cm.

Now continue knitting in the round on all stitches, knit 2 cm with a 2 x 2 rib and bind off all stitches according to the pattern.

Embroider fish on the back according to the pattern.

Sleeves: knit in the round with gray yarn on set stitches +1 loop = 32 p.

Knit 2 cm. satin stitch, 3 cm with 2 x 2 rib and bind off all stitches according to pattern.

For small dogs, especially dwarf breeds that are not adapted to cold weather, have short and sparse hair, and sometimes have no hair at all, with low body weight, additional clothing is necessary with the onset of autumn and winter. You can knit such things for your little pet yourself.

Jacket for dogs as a necessity

Sweatshirts not only keep dogs warm, but also protect them from dirt, rain and snow. They allow you to keep the animal clean and dry, without unnecessary bathing.

Not only small dogs need clothing, but also medium-sized dogs whose fur is periodically trimmed decoratively, as well as dogs that are aged or weakened after illness.

Knitted sweaters are suitable as home wear, or outdoor wear when there is no frost. To secure the jacket to the animal's body, you can use zippers, buttons, Velcro, hooks or buttons, and they can be placed on the back or stomach.

In order to knit an excellent sweater for your pet, you need to make a pattern for the future product.

Required measurements

• neck circumference;
• chest circumference;
• waist circumference;
• back length.

It is better to choose warm and soft yarn so that it does not irritate the delicate skin of a small dog. You can limit yourself to threads of the same color, but if your imagination allows, you can create interesting things using jacquard motifs or openwork knitting. Using melange thread makes it possible to knit a sweater quickly and easily, while at the same time moving away from boring monochromatic colors.

Jacket for dogs without fasteners, knitted with an elastic band

Knitting with an elastic band with alternating knit and purl stitches allows for good stretch to the product. This jacket can be knitted without fastenings and worn over the head. It covers only the chest and back, the paws remain open.
After measuring the dog, draw a pattern or use the measurements as a guide. The part near the tail will be narrower, so we start knitting from there.

Cast on 22 loops and use knitting needles to knit a 2 x 2 rib, in each row adding one loop along the edges as many times as necessary in size approximately up to the length of the waist circumference. Next, add the number of air loops on both sides so that the row becomes almost equal to the length of the waist, approximately 10 loops each. We continue knitting up to the neck without any additions. The narrowing of the neck is ensured by shortening the loops. It will be different for different sizes, so using the measurements as a guide, reduce by about 12. Tie the neck, close the loops.
The part that will cover the chest looks like a rectangle, the long side of which is equal to the distance from the waist to the neck, and the short side is equal to the distance between the paws. In the neck area you also need to narrow the piece by several loops. Then use a hook or needle to sew the two parts together, leaving openings for the paws.

Jacket with hood for dogs, knitted in the round

For a jacket for small dogs of dwarf breeds, you need to prepare 50 grams of thread in three shades. You can knit with circular knitting needles or use stocking needles of smaller and larger diameters, for example, No. 4 and No. 3, hook. The neck can be made plain, and then knitted alternating different colors.
Start working from the top part - the neck, cast on 48 loops in two threads, close them in a circle. Run 4 cm with a 2 x 2 elastic band.

Next rows

In the next row, purl all the loops; loops for the hood will subsequently be cast on from it. Continue again with an elastic band, and after a row add loops in every second section of the purls, it will look like this: 2 knits, 3 purls = 54. When from the beginning of work the length is 6 cm, again add loops in the purl sectors = 60. Continue knitting to the front paws , about 8 cm, and leave holes for them: bind off 2 knit stitches, transfer 13 loops to a large pin or put them on a knitting needle, bind off 2 loops. Continue knitting the remaining 43 loops for another 5 cm. Set aside the loops and return to the front part, finishing the section on the chest also 5 cm. Combine all the loops again, adding 2 missing loops between the parts. Having knitted the product of the required size, to the waist, close 9 front loops. Then do it not in a circle, but straight, decreasing in every second row 2 x 2, 2 x 1, 1 x 2, 1 x 3. Finish the work when the length of the product reaches 24 cm.

Knitting sleeves

We make the sleeves using smaller knitting needles, casting on 34 stitches along the edge of the armhole and ribbing in a 5 cm circle.
From the row with purl stitches, cast on 42 stitches, leaving 6 front stitches untouched. Using knitting needles No. 3, purl a row, evenly increasing the number of loops to 70. Knit the edges of the hood with three loops in garter stitch, and inside with stockinette stitch 12 cm. Close the loops and sew the sides of the hood. Crochet all edges according to the pattern: 1 sc, 1 chain stitch, after 1 cm sc, 1 ch, repeat until the end of the row. This knitted sweater will provide your dog with comfort and warmth during walks.