How to weave an owl from rubber bands. Owl made of rubber bands: the most interesting ways of weaving

The owl is a beautiful bird with huge eyes. Her image is very popular in modern society. In this article we will look at how to weave an owl from rubber bands with our own hands.

You will need: rubber bands, rainbow loom, hook, ring for hanging.

Master Class

Owl on a mini machine

You will need: rubber bands of 4 different colors (for example: green, pink, orange and black), mini-loom, hook.

Master Class

1. Position the machine so that the point is on the left side.
2. Place a green rubber band on the 3 bottom posts in 2 turns.
3. Twist the orange rubber bands 3 turns on the right and left sides.
4. Place 2 green rubber bands on the outermost pairs of posts.
   
   
5. Place 2 pink elastic bands in the center, then slide the paws into the center.
6. Throw green elastic bands along 3 pegs on the right side, then remove the horizontal elastic band and the bottom layer from one peg.
7. Stretch the pink elastic bands by hooking them onto the adjacent post.
8. Return the horizontal elastic band, put pink elastic bands on the right and center, and green elastic bands on the left.
   
   
9. Take off the horizontal and all the bottom elastic bands.
10. Bring the red rubber bands back to the center.
11. Place a horizontal elastic band on all 3 columns and repeat steps 8, 9, 10.
12. Knit another layer in the same way.
13. Weave your head in this way: put green elastic bands along all the columns, throw off the horizontal and the entire bottom layer, hook all the elastic bands onto 2 columns.
14. Make a beak with orange rubber bands, hook the base color, discard the green bottom layer and distribute the elastic bands across the 3 pegs.
15. Place 1 rubber band horizontally, then 2 on all posts, take off the bottom layers and make eyes from black rubber bands.
    
    
16. Throw 2 elastic bands on the sides and 4 in the middle, throw off the eyes and the bottom layer.
17. Distribute the elastic bands between the two outer pegs, string them on the left and right, then throw off the bottom ones.
18. Make a loop, tighten and remove the owl.

An owl made from rubber bands on a mini-loom is ready! I recommend watching the video master class!

Owl with wings

You will need: rubber bands of 3 colors, machine, hook.

Master Class

The owl with rubber band wings is ready! I recommend watching this interesting video!

Fresco "Owl"

You will need: rubber bands in 7 colors, machine, hook.

Master Class

You will need: 500 elastic bands of the primary color of your choice, an iron hook on a long handle, 1 white and 8 black elastic bands for the eyes, 9 orange elastic bands for the beak, a special plastic lock, padding polyester filler.

Master Class

1. Make the first row of 6 loops, for this take 7 elastic bands. Throw the first elastic band onto the hook in 3 turns, then throw it onto the next one and throw its 2 ends onto the hook, make a knot and pull its right side through the left without tightening it.
   
   
2. Thread the hook again through 3 turns, pull through another ring, then put both ends on the hook.
3. You get 3 loops, pull the first loop through the next 2. Repeat this process until you have used 7 rubber bands. The result is a chain with 6 loops, and a ring on the side.
   
   
4. For the second row you need 12 elastic bands, now add 2 new ones to each warp loop.
5. Connect the loops together in this way: insert the hook into the first, pull one out in the same way, throw on the second side, pull the first through the second, then through the third.
6. Connect the 2 sides of the ring and start using a special plastic lock to mark a new row (when you knit all the rings and reach the lock, a new row begins).
7. Knit a second elastic through the same loop and pull out the elastic, then pull the first through the second, then through the third. You can take two at once, it’s more convenient.
   
   
8. The next step is to insert the hook and continue weaving according to the same pattern.
9. In the third row, knit 2 elastic bands into every second link of the previous row. There should be 18 loops. Don't forget to mark the beginning with a padlock. If you are distracted and don’t remember whether you knitted two rings or one, then stretch the product and you will immediately see.
   
   
10. For row 4, use the 1:1:2 pattern - doubling will occur on every third link. You will notice that the diameter of your circle, which will be the bottom of the owl, will increase.
11. Knit in a circle, and in each link of the chain knit only one ring, in this way the “knitted fabric” will rise up.
12. Knit as many rows as the height of the owl. However, keep in mind that the size of the owl should be proportional to the size of the bottom.
    
    
13. Stuff the owl with stuffing and connect the top parts in this way: insert a hook into the two outermost ones from each row, then pull the remaining loop through them. Move on, connecting the two sides. Grab them with your hook and pull the new elastic through them. Make a knot by threading the right end through the left.
14. Make sure that the middle part is lowered down so that the owl's ears appear on the sides.
    
    
15. Weave the eyes this way: start the weave as a base using 8 black elastic bands. Braid it with white elastic bands and bring the black ones to the wrong side so that you can later attach the eye to the toy.
16. Weave the beak in this way: wind an orange elastic band in 3 turns, lower the workpiece onto 2 orange ones, hold the second end of the elastic bands in your hand, then pull a couple more elastic bands through one end and throw its side over the hook. Pull another pair through these 2 loops, then through the 8 that are on the hook, place one orange one.
    
    
17. Attach the eyes and beak using elastic bands.
18. Cut a few rubber bands and attach them to the ears.

A voluminous owl made from rubber bands using the lumigurumi technique is ready! I recommend watching the video master class!

Weaving from rubber bands has gained great popularity among all generations. Using this technique, you can create a huge number of all kinds of figurines, keychains, toys, accessories, and home decorations. How about making an owl out of rubber bands? This is one of the most popular birds among needlewomen. As a symbol of wisdom and fortitude, the owl inspires millions of people. Just look around you - she is everywhere!

Now let's take a closer look at the different ways of weaving owls from rubber bands. In order to better understand the techniques, be sure to view our photos and videos.

We weave an owl from rubber bands on a machine with our own hands in a master class

Weaving an owl on a machine is one of the easiest ways. This tool is very easy to use. By combining rubber bands in the correct sequence, you can get different patterns.

So, first choose an interesting color combination for your future craft. Let the body be bright: blue, green or red, the belly in contrast with these colors. For the eyes, black is used as standard, and the legs and beak are woven with orange rubber bands.

How it works: you string elastic bands onto the posts of the machine in a certain color sequence, throw them off, intertwine and remove the finished product with a crochet hook. Let's look at the diagram in more detail:

1. We string the elastic band onto the three lower columns and twist it in a figure eight. We add three turns of orange (paws) on the right and left sides. We put 2 elastic bands on the outer two columns.
2. We string the color of the belly in the center. We throw off the elastic bands of the color of the paws.
3. On the right, on three pegs we put the color of the body. We throw off the horizontal and bottom elastic from the center. We stretch the color of the belly, catching on the nearest column.
4. Let's return the horizontal rubber band. On the right and in the center we throw the color of the tummy, and on the left the color of the torso. We throw off the entire bottom layer and the horizontal one, and return the color of the belly to the central part.
5. We string a horizontal elastic band into three columns. We repeat step 4. On the right and in the center we put on the color of the belly, and on the left - the color of the torso. We remove the last horizontal layer. Return the color of the belly to the center.
6. We weave another one according to this sequence.
7. Now the head. We put elastic bands along all the columns. We throw off the horizontal and lower parts. We put all the rubber bands on two columns.
8. We weave a beak. We follow the color of the body. We take off the bottom. We put rubber bands on 3 columns.
9. We throw one horizontally, two for each column. We take off the bottom. Let's make eyes.
10. We put on two elastic bands on the sides, and four in the center. We take off the rubber bands with the eyes and the bottom.
11. We distribute the elastic bands into the two outer columns. We put it on the right and left side. We take off the bottom. Secure with a loop. We film the finished work.

For those who are interested in more traditional methods, we suggest that you familiarize yourself with weaving an owl without a machine.

This technique was invented in Japan and is called amigurumi. Using it you can get a three-dimensional 3D owl.

You will need: a hook, about 500 rubber bands (body, eyes, beak), toy filling, for example, synthetic padding and a special plastic lock.

The principle of operation is as follows: you crochet the body, adding another color for beauty. Separately weave the eyes and beak. And then fill the toy with padding polyester. If desired, you can add eyelashes or hairs to the owls' ears.

The work is quite labor-intensive, so we urge you to familiarize yourself with the diagram in the video tutorials section.

In the famous program “Crazy Hands,” the presenters always used the simplest material at hand. Why are we worse? Don't have a special machine? Weave an owl from rubber bands on a fork!

You will need a hook, two forks and elastic bands of different colors. First, connect the backs of the forks using tape. So we got the “machine”. Next, the elastic bands are strung on the tines of a fork, intertwined in a certain order, and after the product is removed with a crochet hook. You will find a detailed weaving pattern in our video collection.

No, this is not the slingshot that boys loved and girls hated so much. Owl weaving is carried out on a special plastic slingshot. The operating principle is similar to fork weaving. First we weave the body, then the head, add eyes and beak. The work can be beautifully mounted on tape and used as decoration.

Video on the topic of the article

We invite you to familiarize yourself with various video patterns and methods of weaving, consolidate the material you have learned and quickly get started with creativity. Enjoy watching!

Today, a large number of children and adults are interested in weaving from rubber bands, which are called irises. Almost any object or figurine is made from them. Small keychains, for example, an owl made from rubber bands, are especially popular. A master class with step-by-step photos and videos will tell you in detail how to weave it.

This master class discusses how to weave an owl from irises using a loom. Set it up so that the slots in the pegs are facing you and the center row is pulled out in the opposite direction. You will need different colors of irises. They are sketched according to the following scheme:

• in the outer rows, one for the first and second column;
• an average of two for the second and third peg;
• diagonally put a pair of elastic bands on the second column of the outer rows and the third of the middle ones;
• throw pairs, two on the outer rows, one on the central row.

To form the beak, add an orange ring at the end of the middle row. To finish the head and shoulders, make 4 pairs crosswise as in the picture.

For the owl's belly, hook 4 irises onto the middle row. Attach three pairs on each side. Fold two orange rubber bands in four, make paws, and throw them on the machine. Attach the irises, folded in three turns, to the last columns.

For the eyes, fold the black iris 4 times, draw a triangle and place the eyes on it.

All that remains is to weave the figure. Start with the edge closest to you. Through the hole in the post, grab the bottom elastic band and transfer it to the front peg. Finish the figure, then make a loop and remove the owl. Straighten the weave and admire the result.

Owl on a mini machine

There are many videos on the Internet about how to weave an owl on a small loom. They are detailed and suitable for those who are starting to master needlework. They clearly show how to make a keychain. For experienced needlewomen, it is more convenient to work using materials from a detailed master class with step-by-step photos.

To make an owl, place an elastic band over three adjacent pegs. On the outermost ones, throw irises folded in 3 turns for the paws.

Connect pairs of columns located on the left and right with two irises of the main shade. Place 2 elastic bands in the center for the tummy. Remove the elastic band you put on at the beginning, as well as the tabs from the columns.

Place the body bands on the 3 front pegs, right on the first and last columns. Throw the first iris behind the right column, and also remove the bottom layer.

Stretch the irises of the tummy and place them on the right columns. Return the horizontal ring to its place. Place belly pairs on the right and center and bodies on the left.

Remove all the lower ones from the front posts. Return the rings that form the tummy to the center.

Repeat the sequence of knitting the layer twice.

Start weaving your head. To do this, first place the body color along the iris. Throw off the horizontal and all the lower ones. Hook all the rubber bands onto the right and center pegs.

Put on a beak ring folded in three. To the top is the iris of the main color. Discard the bottom main color and distribute the rest between three pegs.

Throw one elastic band horizontally and two each on the remaining columns. Discard the lower ones. Make eyes by folding the irises 4 times. Sketch the main color - two on the edges, four in the center. Take off the elastic band with the eyes and the bottom ones.

All that remains is to distribute the rubber bands between the two outer columns, put them on the right and left, and throw off the bottom ones. The owl is ready.

To make working on the keychain easier, watch the video. It describes in detail how an owl weaves on a small loom.

Having mastered weaving a simple figure, try to complicate keychains from irises, and weave a bird with wings.

When working with irises, care is required so as not to tear the rubber bands. When the work is removed from the machine, you need to carefully straighten it. Many people advise tightening the figure with wire. This ensures that the keychain will not unravel. To hang the craft on your keys or bag, add a carabiner to it.

Video: How to weave an owl figurine

Weaving from rubber bands is gaining momentum in popularity every day. And if earlier it all started with ordinary bracelets, today many are interested in how to weave an owl from rubber bands. And all because such a figure is universal. In the future, other animals can be made based on it.

Volumetric 3D eagle owl

There are many master classes on the Internet that tell you how to weave an owl out of rubber bands using the lumigurumi technique using a crochet hook. Did you know that this method is also applicable to the machine? In addition, although such a product will lose its miniature size, it will look no worse.

Necessary materials:

• machine;
• elastic bands of different colors;
• hook;
• filler.

Process description:

Owl keychain

Another option for creating crafts from rubber bands can be done using a special device - a slingshot. But even if you don’t have such a device in your house, it doesn’t matter, this master class can easily be adapted to how to weave an owl on forks from rubber bands. Don't believe me? Then try it with us.

Necessary materials:

• elastic bands;
• slingshot;
• hook.

Process description:

Read also:

• Bracelet made of elastic bands French braid on a slingshot and machine

In just two photo lessons, we looked at how to weave an owl from rubber bands using a machine and a slingshot. Of course, for beginners, the process may seem a little complicated and confusing. However, having mastered the technique, you will not only understand how to weave an owl figurine from rubber bands, but also, based on the experience gained, you will be able to try to make other toys, for example, a penguin or a rabbit.

Using the amigurumi technique, which today captivates needlewomen all over the world, and now it’s time to take up another popular type of creativity to get an original owl made of rubber bands. And for this product this time you do not need a special plastic machine; all weaving is done with just one hook, and the result is a voluminous owl. This technique has already been called “lumigurumi” by needlewomen, which connects elastic bands and the art of amigurumi knitting.

Owl made of rubber bands

You know that amigurumi allows you to create cute soft toys with tight knitting, they always turn out to be voluminous and dense, so a child can play with such a toy, but such a product will definitely cheer up adults as well. Materials you will need to complete weaving from rubber bands “Owl”, these are directly multi-colored rubber bands and a hook, it is advisable to take an iron one with a long handle, it is convenient for them to perform such crafts.

For such an owl we will spend only about 500 rings; you can choose their color at your discretion. It can turn out to be one-color or striped, it depends only on your imagination. To make the eyes, you need to prepare 13 pieces of white rings and 8 pieces of black ones. The eyes are made separately and then attached to the product. You should also make the beak separately; you need to prepare nine orange rings for it. For this craft you will need a filler; this material can be called unusual, because we have never used it before together with. You can use padding polyester as a filler; perhaps you have an old soft toy at home that is torn, so you can take the filler from it.

The first row will consist of six loops, for which we will need seven rings. The first one must be thrown over the tool and wrapped in three turns, they must be thrown onto the next one, and both ends must be thrown over the hook, and a knot must be made, pulling its right side through the left. There is no need to tighten it.

Next, the hook must be threaded again through three turns, and another ring must be pulled through, and both ends must be put on the tool. After this step, we have three loops on it, the first of which must be pulled through the next two.

We do this with the next elastic band until we have used all seven pieces so that they form a chain of six loops, and there will be a small ring on the side. In amigurumi toys it is called “magic” or “magic”.

How to weave an owl from rubber bands

Further process how to weave an owl from rubber bands, is quite simple, and the actions will be repeated from row to row. For the second one we will need 12 elastic bands and we will make the corresponding number of loops, now we will make two new ones in each loop of the base.

First you need to connect the loops together: insert the tool into the first one, pull one out according to the scheme described above and put the second side on it, then pull the first through the second, and then through the third.

Once we have connected the two sides of our ring, we will use a special plastic lock that will mark the beginning of a new row. When you, having knitted all the rings, reach the lock, this means a new row begins.

Next we will knit the second one through the same loop. We pull out the elastic band, then pull the first one through the second, then through the third. It is much more convenient to take two at a time. Next, we move on to the next link, into which we need to insert the hook, and continue knitting according to the given pattern.

In the third row we will knit two rings into every second link of the previous row. Thus, we will have 18 loops. As always, the beginning should be marked with a padlock. If you accidentally get confused or distracted, and now you can’t remember whether you knitted one or two rings, then stretch the product and you will immediately see their number.

We will continue like whipping an owl out of rubber bands, and for the fourth row we will use the pattern: 1-1-2, that is, the doubling will be on every third link. It is on the same principle that amigurumi toys are knitted when it is necessary to expand the circle with tight knitting. You will notice on the fourth row how the diameter of your circle, which is the “bottom” of your future owl, increases. For a small craft, four rows of the base will be enough, so this will complete the increase in rows.

In the future, we will knit in a circle, and in each link of the chain we will knit only one ring, thus the knitted fabric will rise up. Knit as many rows as the height of the owl you want, but so that its dimensions are proportional to the size of the bottom.

After this, the owl should be filled with filler, and then the upper parts should be connected. To do this, you need to thread the hook into the two outermost rows of each row and pull the remaining loop through them. Thus, move further, connecting the two sides. We grab them with a hook and pull a new elastic band through them, then we make a knot on this elastic band, threading the right end through the left. You need to make sure that the middle part is lowered down, because the ears should be visible on the sides.

How to weave an owl from rubber bands

To finish the process, how to weave an owl from rubber bands, we also need to make the eyes separately. Since they will be round, we will begin to weave them in the same way as the base for the owl, only it will consist of eight black rings. You will receive a magic ring, and then - in the second row - you will braid it with white rings; in the second row, as we showed earlier, you need to knit 2 white rings into each link. The black one must be brought out on the wrong side, then it will be used to attach the eye to the knitted toy.

We move on to the beak: we wind one orange one in three turns, then we lower the workpiece onto 2 orange ones, we hold the second end of the elastic bands in our hand, without throwing it over the tool. We pull another couple through one end, and put its side on the hook. Now we thread a couple more through these two loops. And then through all eight, which are now on the instrument, we throw it on one orange one.

Using rings, you need to connect the body with the eyes and beak. For the ears, you can take cut rubber rings or make them using serpentine, cutting it into ribbons.

In addition to amigurumi toys made from threads, you can make a beautiful one.

How to make an owl from rubber bands

There are several other ways how to make an owl from rubber bands, for which a conventional machine will be used. A tool that needlewomen who know how to perform the most intricate patterns have long been accustomed to.

In order to make multi-colored ones, we need the following set of materials: 45 red ones, from which the base will be made, 14 white ones for the belly, four orange ones for the beak and paws, and two black ones for the eyes.

Owl made of rubber bands on the machine It is done quickly and simply, in addition, this is a lightweight master class, in which not the entire working space of the machine will be used, but only the six outer columns. They need to be turned towards you, so that you get two rows of three columns each.

The first one must be folded in half and put on all three columns of the bottom row. Now screw one orange one three turns onto the rightmost column, and the second one onto the leftmost column of the bottom row. Next, you need to throw paired red ones on both extreme (opposite) columns, and paired white ones on the middle opposite columns.

Now you need to use your hook to grab the bottom horizontal one from the near row and throw it to the center. Following it, we throw off two orange blanks from the columns.

Next, you need to put a red ring on the nearest row. We put on paired red ones on the right row, and then we throw off the horizontal one only from the rightmost column, and then we throw off the lower loops from the same column. The lower loops must also be dropped from the upper right column.

After this, you need to pay attention to the middle column located at the bottom in the middle. You need to hook the white loop and stretch it, throwing it over the lower right one. In the same way, it must be stretched on the back row. Now we find the horizontal red loop that we threw off and put it back on.

Such owl made from rubber bands on forks can be done by connecting two forks with the tines pointing in opposite directions. In this case, the central row should always be thrown over paired central cloves 2-3. However, making such a keychain on a machine is much more convenient; thanks to the notches on the pins, it is convenient to hook the loops. Next, you need to throw paired red ones on the left side, and paired white ones on the right and in the center.

After this, you can remove the horizontal ring from all the pins. Now from the row that is closer to you, you need to throw off the lower loops: on the left side - red, from the center and on the right - white (the elastic band that was stretched from the center to the right). And then we throw them off the top row in the same way.

Owl made of rubber bands on the machine

Next, you need to pick up white elastic bands from the right columns, but do not throw them into the center, but throw them over the center. We put a red ring on the bottom row. We put paired red ones on the right opposite pins, and throw off the horizontal ones only from the right one, holding them with our fingers so that it does not fly off the central one. And we throw off the lowest loops from the upper and lower right pins. Then we stretch the white elastic bands again (in the center of the white loops we have two rows, we need to stretch the top ones), and throw them to the right (namely, we throw them over, removing them from the central one), do this for the bottom and top row. And we return the red horizontal one to its place.

To make yours neat owl made from rubber bands, video You should definitely watch the lesson; by repeating after the master you will not get confused in the execution steps.

Experienced masters are always happy to share their secrets, how to weave an owl from rubber bands, video lessons are widely presented on the Internet, and in the comments you can always ask for advice or a hint if at some stage you are unable to make neat stitches, which spoil the appearance of the entire craft.